View Full Version : Dash Cluster illumination poor
Dutchy1978
05-07-2016, 08:08 AM
Hi all,
I have a white dial cluster from a JDM EG civic which has poor illumination. I have changed the bulbs to LED bulbs in the hope it would help but doesn't look much different.
Has anyone got any ideas on how to brighten it up?
http://uploads.tapatalk-cdn.com/20160704/47e528a62bb531273b8a04462ea88940.jpg
http://uploads.tapatalk-cdn.com/20160704/c0f1a0b7ebe4a2d6fa34eeae8d3a5a1e.jpg
bennjamin
05-07-2016, 07:49 PM
do you have a "dashlight brightness adjuster" (dimmer switch)
This maybe required with that particular cluster and it may be sitting on the lowest setting.
Dutchy1978
05-07-2016, 08:25 PM
It is fitted to my mini which doesn't have an adjuster. Is there a way I can adjust it to a higher setting permanently?
EKVTIR-T
05-07-2016, 08:29 PM
could probably wire one up and tuck it behind out of sight
would be cheap from wreckers anyway to test :)
Dutchy1978
05-07-2016, 08:32 PM
True. I was hoping not to have another adhoc wiring loom behind the dash.
bennjamin
05-07-2016, 09:10 PM
Here (http://www.ozhonda.com/forum/showthread.php?49757-DIY-Got-a-honda-with-cluster-light-iffy-LOOK-IN-HERE-!) is a DIY i wrote 10 years ago about almost the same issue. It might help you if you can trace back the same coloured wires etc.
bennjamin
05-07-2016, 09:14 PM
Ok according to google the EG6 cluster didnt come with a dimmer - and you CAN rewire one in giving you a brighter cluster
http://civic-eg.com/forum/viewtopic.php?f=56&t=19474
Dutchy1978
05-07-2016, 11:16 PM
My EG harness only has the black/red wire. No red or black. Thanks for the ideas but Your DIY practically bypasses the dimmer which means the Custer is getting a full 12v to it. Mine is doing this already and it is still dull. See below. the EG civic dimmer controller has a resistor built in to dim it. I didn't think a resistor increases the power.
Dutchy1978
05-07-2016, 11:17 PM
http://uploads.tapatalk-cdn.com/20160705/73c04a550570ad49d2806b371e1bce92.png
bennjamin
06-07-2016, 07:36 AM
Just trying to help. I did do that years ago and thought it might give you some insights.
More googling tells me EG6 clusters generally have poor illumination - can I suggest looking at changing the bulbs themselves to a more powerful variant / retrofit a LED strip hidden around the cluster or even grab a standard civic cluster and fit a white dial to it , giving a similar effect (except not 180km/h JDM )
Dutchy1978
06-07-2016, 08:26 AM
Thanks for the help. Sorry if it came across as in grateful. Not intended too.
I have LED bulbs in it now but the idea of an LED strip around each dial sound good. I'll look into this.
bennjamin
06-07-2016, 08:44 AM
I'm sure you can poke the LED strip in a way to give illumination and also be hidden. Be sure to write it up and post it for the DIY kids here
Dutchy1978
06-07-2016, 02:35 PM
I have the LED strip and a dimmer as I think the LED strip will be super bright. While I'm wiring it up I might as well add the dimmer in and tuck it under the dash.
Thanks for the feedback.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.