Evo 8 Enkei wheels Fit on Integra Thread

[JDMscrub]

Hey Guy's

So I bought EVO 8 Enkei Wheels for my DC5 Which is same stud pattern on DC5's and offset is Fine they are almost identical just 1inch bigger and wider.
*Stock Dc5 16x7 42+ offset I believe*
*Stock Enkei EVO 8 wheels 17x8 38+ offset* Both wheels 5x114.3

Now the problem is when I place the wheel on the Hub and use OEM Honda lug nuts they is movement and room where the lug nut sits. Ive bought Volk Rays Aftermarket Lug nuts but I feel like they are too big and don't entirely fit inside the holes.

So now im buying OEM EVO lug nuts and I hope they will fit flush.

Does anyone Else have EVO wheels on there DC5? If so what did you have to do and are you running aftermarket lug nuts or hub centric rings?
Please help :)

30015

[EKVTIR-T]

Are you sure its not just the seat?

[ep3rsteve]

That looks sick.

This is what some guy putting them on his USA EP3 said.

http://webcache.googleusercontent.com/search?q=cache:VKIjPEbiXaAJ:www.ephatch.com/forum/showthread.php%3F74811-Evo-8-Enkei-What-do-I-need-to-do+&cd=14&hl=en&ct=clnk&gl=au

06-20-2014, 10:34 PM #11
b_ron

"All you need is flat seat lug nuts and the hub rings"

He says these are the hubrings: https://www.amazon.com/pieces-Hubcentric-67-1mm-64-1mm-Hubrings/dp/B00AAOEPSO

And these are the "flat seat lug nuts" http://www.ezaccessory.com/Toyota_Lexus_OEM_Mag_Lug_Nuts_p/98-0003.htm

[JDMscrub]

That looks sick.

This is what some guy putting them on his USA EP3 said.

http://webcache.googleusercontent.com/search?q=cache:VKIjPEbiXaAJ:www.ephatch.com/forum/showthread.php%3F74811-Evo-8-Enkei-What-do-I-need-to-do+&cd=14&hl=en&ct=clnk&gl=au

06-20-2014, 10:34 PM #11
b_ron

"All you need is flat seat lug nuts and the hub rings"

He says these are the hubrings: https://www.amazon.com/pieces-Hubcentric-67-1mm-64-1mm-Hubrings/dp/B00AAOEPSO

And these are the "flat seat lug nuts" http://www.ezaccessory.com/Toyota_Lexus_OEM_Mag_Lug_Nuts_p/98-0003.htm


So would these lug nuts fit they OEM Evo ones I think ? http://www.ebay.com.au/itm/Wheel-nuts-to-suit-Mitsubishi-Magna-Verada-380-etc-with-washers-x20-BRAND-NEW/201737346514?_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1% 26asc%3D20131017132637%26meid%3D07b8b71784e74113a8 2d1b7a03f47b21%26pid%3D100033%26rk%3D6%26rkt%3D8%2 6sd%3D221737231948

[ep3rsteve]

Both have the same thread size and they look identical.

I think they should.

[u mad?]

damn that looks nice op