DSoulCRX
13-09-2017, 06:08 PM
Hey guys in the middle of making a breather/catch can setup and was wondering if anyone knows where to get the fittings for the rear of the block?
http://www.ebay.com.au/itm/Rear-Block-Breather-Fittings-Plug-M28-to-10AN-For-Integra-Catch-Can-B16-B18C-GSR/272740704303?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
I found those but i'd rather a pushlock one if posssible so i dont have to buy expensive fittings and can just run a normal hose off it.
Running a b20 bottom which has all ports blocked and im worried once i connect vtec the extra pressure could be bad for it.
http://www.ebay.com.au/itm/Rear-Block-Breather-Fittings-Plug-M28-to-10AN-For-Integra-Catch-Can-B16-B18C-GSR/272740704303?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
I found those but i'd rather a pushlock one if posssible so i dont have to buy expensive fittings and can just run a normal hose off it.
Running a b20 bottom which has all ports blocked and im worried once i connect vtec the extra pressure could be bad for it.