PDA

View Full Version : exhaust note???



franki
22-04-2005, 08:04 AM
Hey guys. i have a dc5r, stock exhaust is like 2". but i was told that puting a 2.5" may make the sound droning and less high pitch vtec sounding. what do people think. i mean i want gains but i want it to sound good. not a tinee sound like u get when u have a stock exhaust with just a tip or a hole in the muffler. what exhaust do use have on ur dc5r and how does it sound? :honda:

FANATK
22-04-2005, 08:29 AM
Exhaust have been covered alot before, you can do searches...

but 2.5" is the way to go in my opinion if u keeping close to standard

sugapopcandy
22-04-2005, 10:43 AM
A minor

57UDD
22-04-2005, 10:50 AM
I've found with Honda'z that the tinny sound is hard to avoid. Like my mate got a real good brand name exhaust system for sh!tload and his was tinny and sounded crap. Where as for me i got one done at a muffler shop and it sounded heaps better, can hardly notice the tinny sound. These were both the same cars btw, two teg vtir'z. When you get your exhaust done put on a resonator as well. it changes the note of the exhaust a lil and gives it a depper note. Well thats my experience anyway.

[stealth]
22-04-2005, 11:20 AM
yeah thats right... adding resonator.. gives u a deeper note.. and more unlikely to produce a tinny sound at high revs...

crispy
22-04-2005, 07:19 PM
I dont agree with you fanatk. 2.5" is way too big even for a dc5r. For starters there too loud and really will give ya the shits after a while. I rekon the biggest you should go would be 2.25"

ginganggooly
22-04-2005, 07:52 PM
I dont agree with you fanatk. 2.5" is way too big even for a dc5r. For starters there too loud and really will give ya the shits after a while. I rekon the biggest you should go would be 2.25"

this is gold!
seriously. care to elaborate on that a tad -ignoring the noise issue?
what makes it too big?

*waits for comments about backpressure

Jim80y
22-04-2005, 08:07 PM
DC5R? Far out go 3", 2.25" is the smallest I would go

tegstar83
22-04-2005, 08:18 PM
Where does the resonator go on the exhaust?

lerroy
22-04-2005, 08:48 PM
Middle of the B pipe or wherever i have one mid way

tegstar83
22-04-2005, 09:47 PM
ohh the hotdog.

faijai
22-04-2005, 11:23 PM
as if 2.5" is too big! lol.
its a good size for tegz

olda
24-04-2005, 08:51 PM
as if 2.5" is too big! lol.
its a good size for tegz

2.5" only if the e/g has been modified.
Otherwise 2.25" is fine.
Been there, done that! ;) ;) ;)