PDA

View Full Version : ENGINE START



JULZY
13-01-2004, 03:01 PM
just curious, how hard would it be to get one of those kick ass engine start buttons from the s2000 into a crx? pretty easy ill imagine, just some basic circuitry. but the button itself is what i want! how much n where from! any idea?

Yspool
13-01-2004, 03:02 PM
yeah ill be in one of those too!

kiddoDC2
13-01-2004, 04:17 PM
i'm pretty sure Pivot has an engine start button
its alot smaller than the s2000 one though

A'PEXi
13-01-2004, 04:24 PM
you can buy a pivot start button which is basically the exact same thing for $100 or so? places which sell auto accesories will have them, eg. autojoy
and yes, just some basic wiring.... possibly do a search and you will find a diy for them...

vti-2
13-01-2004, 05:25 PM
It's not hard, yes it is basic wiring but i'd get an auto electrician for example to do it rather than try in your backyard.

If anyone has had experience with installing the S2K engine start into any type of Honda or knows of a workshop or a licensed auto electrician that can do it, post here.

:thumbsup:

n/a
13-01-2004, 08:57 PM
dudes dudes dudes! you all have the S2k syndrome aye?

i have it too.. there's an auto-salon DIY section that kha did on the S2k engine start button, seemed real simple with the right equipment and hands.

it was a while back, it'd say 5-6months ago, find it and read it!

has pricing and the wiring all in it for just $7.50! i think.. i mean the magazine is that price :D

eg6powah
13-01-2004, 08:59 PM
mate, $80 excluding postage and handling.

bt-revolution
21-04-2005, 12:39 AM
Anyone who's interested (new model)
Check out: http://www.ozhonda.com/forum/showthread.php?t=19039

BT-Revolution

[Blitz]
21-04-2005, 09:14 AM
I've done in my prelude, easy as pie.

1. S2000 button
2. SPST 30amp 12v relay
3. Relay base
4. 3 lengths of wire, 6 if you don't use the relay base
5. 4 pin header with crimp pins (only 3 are used)

All up less than $100, inc. parts from Jaycar

ViHatcher
21-04-2005, 09:04 PM
The part number from USDM is 35881-S2A-911 for S2000 switch.. U might need to check it out from your local parts for price. Good luck...

Honda_tuner
30-08-2006, 08:02 AM
I know this is an old thread, but I was wondering if anyone knew what pins were what on the s2k start button. And what exactly is the relay used for?

bennjamin
30-08-2006, 09:08 AM
I know this is an old thread, but I was wondering if anyone knew what pins were what on the s2k start button. And what exactly is the relay used for?

thanks for searching. But you didnt search hard enough !

Look at this thread -
http://www.ozhonda.com/forum/showthread.php?t=42680&highlight=s2000

Its a DIY for the s2k button ~ should be very similar in your car.