[Euro] My latestet Mod..Euro R pedals.

[Peekay34]

What do you think....

[albii]

looks good now you have to vacuum the carpet........where did you get them?
and don't you just hate the way the euro mats wear?

[cccoltsicehockey]

I would also like to know where you got them

[yfin]

Sweet!

[PERTH_EURO]

Looks da goods :thumbsup:

[PNR888]

Look nice. Do you have to remove the original pedals out completely before you fit the metal ones on?

Albii: I got Honda's floor mats then put another layer of cheap arse mats on top. 2. reasons: 1. I can just throw them out if they dirty and worn.
2. additional insullation against vehicle noice, vibration and harshness. maybe...

[Peekay34]

The accelerator pedal and foot rest are complete replacements. The clutch and brake rubbers come off and are replaced by new covers which you are required to rivot into place. Cost they were at trade through Astoria Honda. They can order them provided you have the part numbers. Have no idea what RRP price is. Thanks about the hard time re carpets if I was home in Melbourne long enough I would do it..spend most of my life interstate.... :(

[EuroAccord13]

Totally Smichhhhkkk!

[euro77]

looking very nice! would love to have that in my car :D
how hard is it to install?

[LOC888]

Hey Peekay, looking awesome...
Can u tell us the part numbers for the pedals..

[Peekay34]

The hardest to install is the Accelerator pedal. Is ok when you know how though.....rest is easy.

Foot Rest pedal: 46992-S6M-R00
Brake+Clutch pedal: 46545-SEA-R01 x2
Accelerator pedal: 17800-SEA-R01

[euro77]

Nick... order them for me will you LOL :D

[baboo]

Sweet!! another EURO R pedal owner!!

[kam]

hey guys, sorry to bring up an old post, but theres just so many usefull threads on this forum! ive seen some other nice looking pedals, namely on the following website:

http://autoshow.permaisuri.com/Content/Autoshow.asp?AutoID=20040427191456

you can see them on the 3rd picture. Are they any special type of pedal, or just a generic type brand ? the picture on the top of this thread, the brake pedal looks really small... or is it just me ?

[Peekay34]

I had a look ..yuk they are metal add ons over ther top of the existing pedals. The EuroR Pedals are so much better.

[EuroAccord13]

Agreed... Original Rocks!

[VirIIx]

very very nice peekay :)

[PERTH_EURO]

Foot Rest $230rrp ex Japan
Clutch & Brake $75rrp each ex japan
Acc. $146rrp ex Japan

total of $526.... ouch

Good old honda North come thru with the goods again :thumbsup:

[Nikoy]

burswood honda are just as good if not better

[PERTH_EURO]

Burswood honda, service department shit me.

see thread about water in headlights

shame realy cause they are a min drive from my house

[Pum[Z]]

Foot Rest $230rrp ex Japan
Clutch & Brake $75rrp each ex japan
Acc. $146rrp ex Japan

total of $526.... ouch

Good old honda North come thru with the goods again :thumbsup:

OR timbo just PM Tanghy... He can source u those pedals for so much cheaper then what Honda North charges...

[Peekay34]

I paid a lot less than that...ouch mind you I got mine at trade....

[PERTH_EURO]

yeah i havent got em. Was just interested in availabilty and cost.

There is no way i can justify that type of cash on some pedals.

How much did u get em for then I know how much to haggle with my Honda dealership??

[Peekay34]

Around the 360 mark...

[PERTH_EURO]

cheers :thumbsup:

[baboo]

Foot Rest $230rrp ex Japan
Clutch & Brake $75rrp each ex japan
Acc. $146rrp ex Japan

total of $526.... ouch

Good old honda North come thru with the goods again :thumbsup:

Timbo, they are pulling your leg.

How can a foot rest be more expensive than the accelerator, the accelerator is whole mechanism including the rod connecting to the firewall.

You should be about to source them for around $300 all up.

[Q_ball]

looks great buddy!

[PERTH_EURO]

Timbo, they are pulling your leg.

How can a foot rest be more expensive than the accelerator, the accelerator is whole mechanism including the rod connecting to the firewall.

You should be about to source them for around $300 all up.

true.

Dont worry I wont be getting them from any honda dealership.

[PERTH_EURO]

Thanks Tanghy :thumbsup: ;)

[PERTH_EURO]

my pedals have arrived and big thanks goes to Tanghy.

We have fitted the accl. and footrest, but bit scared about the clutch and Brake.
The kit is complete relacement of all the mechanical parts back to the firewall for all 3 pedals.

I think i will have to get Honda to do those last pedals.

They look mint tho

[stephen8512]

timbo! u got ur pedals mate!!!! excellennt!!!!!!
i got my mugen kit fitted up all schmick!!!!!!!!! stoked!
how much did it end up costin ya?
and did u get it from tanghy?

[PERTH_EURO]

I read ur Mugen post.. Hell yeah cant wait to see pics

Yeah got em from Tanghy

Pics:
http://img365.imageshack.us/img365/9027/img4028small9gz.jpg
http://img365.imageshack.us/img365/9789/img4030small2ik.jpg
http://img365.imageshack.us/img365/259/img4031small4tn.jpg
http://img365.imageshack.us/img365/4860/img4032small5yw.jpg

[stephen8512]

im uploading as we speak timbo!!! check that post in 5 mins
btw, i thought the pedals were just the actual pads, like just the steel bits.... not full replacements?

[PERTH_EURO]

i thought the pedals were just the actual pads, like just the steel bits.... not full replacements?

so did we lol, but it aint.

Looking at drilling out JDM pedal rivits and putting on current ones rather than removing everything back to firewall

[Peekay34]

WTF I got the covers and not the whole pedal assembly for the Clutch and Brake pedals.....How much did they cost... And yes drill the rivets out simplest solution.

[baboo]

yeah WTF timbo? Like Peekay said, the covers for the brake/clutch pedal will do.

[PERTH_EURO]

peeps, as far as myself and Tanghy knew the covers was all that was ordered.

Now the whole thing arrived, still only costing $330, and most probably i will just drill out rivits and refit pedals to current ones in car

[stephen8512]

whoa.....330!
but then again, it is OEM honda parts so its to be expected
yeah timbo just remove them rivets and just fit em....would be a pain in the arse to rpelace the whole damn thing......theres more risk of not installing it correctly......

[PERTH_EURO]

well i treid to remove pedals.. drilled out one rivet.. only to find they are glued on as well. The suckers were not going anywhere

Prestige honda ended up fitting them.

http://img54.imageshack.us/img54/1840/img4233small1ka.jpg
http://img106.imageshack.us/img106/1216/img4235small6nb.jpg

[Chris_F]

loving the euro-r pedals.

honda needs to do something about the quality of its mats tho... mine look a bit warn like that too and most of the time im driving without shoes :rolleyes:

[aleksandrov]

Foot Rest $230rrp ex Japan
Clutch & Brake $75rrp each ex japan
Acc. $146rrp ex Japan

total of $526.... ouch

Good old honda North come thru with the goods again :thumbsup:

What???? That's outrageous. I got mine for $250 for the entire set, installed, from IS Motor Racing in Sydney.

Btw, I'm not too impressed with the finish quality. I've got a set of Levoc pedals on my other car, which I bought for $150 about 8 years ago, and they have a much bettter brushed alloy finish. The Honda ones almost look like plastic.

[PERTH_EURO]

aleksandrov

i didnt pay what honda wanted. Dont worry about that :thumbsup: I didn't get them quite as cheap as you tho

[kenbo]

Hi Guys,

Just another option to whack some nice Mugen brushed pedals into the Euro. A cheaper option i suppose.

The trouble is, I'm not sure if it fits as the size is larger than the base plate.

Any suggestions ?

Kenbo

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=4602936266&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1

[aaronng]

That is not a real Mugen pedal set.. It's just a no brand one.

[tron07]

Where is IS Motor Racing in Sydney?? Which surburb?

This Acura TSX's paddles is nice ....
http://memimage.cardomain.net/member_images/5/web/389000-389999/389638_162_full.jpg

http://memimage.cardomain.net/member_images/5/web/389000-389999/389638_169_full.jpg

[aleksandrov]

http://www.ismotorracing.com/

[tron07]

Thanks mate... can you post some photo how your paddles look like?