PDA

View Full Version : adding a cd player/changer to 97 prelude



aditya
26-04-2005, 10:17 AM
hi
i want to add a cd player/changer to my 97 prelude vti-R. can some one pls tell me how to go abt it ? i tried to look for some obvious connections for a cd changer in the boot, but couldnt find any.

any suggestions much appreciated

adi

LUD38U
26-04-2005, 10:59 AM
what deck are you using? i presume your using the standard Honda one?

aditya
26-04-2005, 11:12 AM
what deck are you using? i presume your using the standard Honda one?

yes its the standard honda cassete and radio deck..but it has a provision for cd changer as it says "cd changer control" on the deck. so i guess there should be some easy way to connect a cd changer to it ..

LUD38U
26-04-2005, 11:43 AM
yeah you can only use the Honda changer....see if anyone is selling one on the for sales section.

ECU-MAN
26-04-2005, 11:11 PM
you wont find anything in the boot either
Honda changer comes with a cable you run tot the boot for the stacker

vtek
26-04-2005, 11:37 PM
yeh get a m-bus changer.. you have to run the cable if there isnt any, but the good thing is you dont need to run anything else such as power wires.

aditya
27-04-2005, 09:58 AM
thanks guys .. but now i think i would just replace the head unit.. so can anyone please advise a simple way to pull out the honda head unit ?

J-MuN
27-04-2005, 10:06 AM
cd player and changer must be same brand dude.. ;)

aditya
27-04-2005, 02:25 PM
cd player and changer must be same brand dude.. ;)

yes of course.. i am not going for a changer anymore.. just going to replace the existing cassette radio deck with a pioneer mp3 head unit.. but not really sure how to pull out the honda head unit ..
any suggestions ?

an!mal
27-04-2005, 06:25 PM
crowbar !!??

if not sure best get it installed by someone who knows what they are doing.

as the wires going into back of honda head unit all wired into socket, two choices, try and get an adaptor or chop the wires and either solder or twist em together to connect to head unit. solder is better!!

if you have not done it before or want a decent job done; ie if it fooks up at a later date you can take it back to who done to it, to get it sorted!!

your choice

an!mal

vtek
30-04-2005, 01:10 AM
yeh get it done by a pro if you havent installed one, taking it out might stuff up the console etc... and the pros do it neater.

S92
30-04-2005, 06:47 PM
watch a pro do it the first time then its a lot easier for you to do it after that

IndoStyler
06-05-2005, 09:33 PM
bro, if i knew who you are, then i'd fit ur new head unit in 4 u.....only reason is coz i've got a 97 lude, n i've changed my head unit myself

its pretty easy to change....just pull off the plate surrounding the head unit with a screw driver.....i did that to mine n i didnt damage anything