PDA

View Full Version : So I went drag racing with my 1.8L B series



blackdc2
27-04-2005, 09:44 PM
http://img.photobucket.com/albums/v677/YonasLiu/misc/Rimg0151.jpg...

EG5
27-04-2005, 09:47 PM
big thumbs up jason , welcome to 12 sec allmotor club!
very fast b series!!!

euGeR
27-04-2005, 09:51 PM
congrats jase! :D now start reeling in that EG5 ;)

sugapopcandy
27-04-2005, 09:53 PM
well done!! very very impressive!

bennjamin
27-04-2005, 10:11 PM
wtf. More info plz.

joneblaze
27-04-2005, 10:35 PM
Congrats Jason.

That's.... insane.

quangsta
27-04-2005, 11:05 PM
plz say it was an integra vtir coz i wonna b cool too :cool:

HuntA
27-04-2005, 11:52 PM
plz say it was an integra vtir coz i wonna b cool too :cool:

haha yea i want one :P
my time wil come....
nice job man :)

panda[cRx]
28-04-2005, 12:13 AM
man u cant just post like that, u gotta give us some info punk :p

Q_ball
28-04-2005, 02:37 AM
good work mate!

TODA AU
28-04-2005, 06:17 AM
Exellent effort Jas, well done...
Great to see it all coming together at last.
Can't wait to see how it goes at the cuircut... ;)
Cheers

Adrian

DynoDave
28-04-2005, 07:21 AM
Yes A big congrats it is good to see you back out there having a big go.What tyres where you on as the 60' is very good.

Regards Dyno Dave

i_own_you
28-04-2005, 07:42 AM
holly molly!!!

info!!!

EG5
28-04-2005, 07:51 AM
Yes A big congrats it is good to see you back out there having a big go.What tyres where you on as the 60' is very good.

Regards Dyno Dave

M/T slicks
22x8x15 ( the one that we used on EGK20A)

EG5
28-04-2005, 07:53 AM
wtf. More info plz.

its a dc2r with alot of mods ( Allmotor )

blackdc2
28-04-2005, 08:31 AM
till running stock throttle body and stock intake manifold.

just remember guys, the car was running -4 degrees camber and heaps of toe for circuit racing, with a proper wheel alignment for drag racing, probably a little more in it.

plus the sussy was setup for circuit which is backwards to drag i beleive.

DynoDave
28-04-2005, 09:01 AM
Ok that is why the 60' is so good with the slicks still a great job Jason and the intake is why MPH is down a bit for that ET.A big :thumbsup: to you and everyone that has helped you get down to these times.
Regards Dyno Dave

DMT
28-04-2005, 09:11 AM
till running stock throttle body and stock intake manifold.

just remember guys, the car was running -4 degrees camber and heaps of toe for circuit racing, with a proper wheel alignment for drag racing, probably a little more in it.

plus the sussy was setup for circuit which is backwards to drag i beleive.

good job mate but this only tells me what is stock not what has been modded! :thumbsup:

details like mods, kw at the wheels would be helpful ?

is your cars tripped out or full street trim ??

blackdc2
28-04-2005, 09:12 AM
Ok that is why the 60' is so good with the slicks still a great job Jason and the intake is why MPH is down a bit for that ET.A big :thumbsup: to you and everyone that has helped you get down to these times.
Regards Dyno Dave


thanks Dave

blackdc2
28-04-2005, 09:16 AM
good job mate but this only tells me what is stock not what has been modded! :thumbsup:

details like mods, kw at the wheels would be helpful ?

is your cars tripped out or full street trim ??

basically it has pistons, cams, intake, exhaust + all the little bits you need to make it all work together.

I am not going to post power figures cause every dyno is different and should be used as a tuning tool.

MrPlow
28-04-2005, 09:25 AM
Hey - I was there to see both your 13 flat run and then the 12.9 run, very impressed good work! I introduce myself next time..

keep it up dude!

DynoDave
28-04-2005, 09:49 AM
basically it has pistons, cams, intake, exhaust + all the little bits you need to make it all work together.

I am not going to post power figures cause every dyno is different and should be used as a tuning tool.
Yep the 400m blacktop dyno says it all.:D
Regards Dyno Dave

bennjamin
28-04-2005, 09:55 AM
JUST a Dc2.....and already chasing down a K20 powered lil EG civic !

Amazing....it would be very interesting to compare both - mods vs price vs power etc etc. Altho , i understand this wont happen for now :)

I just think this time is incredible lol....
Great work Jason !

McChook
28-04-2005, 10:08 AM
As Dave said, congrats - but not a real surprise, that damn thing is fast.
With a bit more time and a set of slicks...

ANTI CLOCKWISE POWER!!!!!!!!!

And DMT Dave... it has a looong list of mods. You basically need "the works bro". Not cheap, but pays off, as you can see

DMT
28-04-2005, 10:12 AM
basically it has pistons, cams, intake, exhaust + all the little bits you need to make it all work together.

I am not going to post power figures cause every dyno is different and should be used as a tuning tool.

fair enough still you would have to be making 180 - 200fwkw to run that time and that is huge power for an n/a 1.8lt

unless of coarse it its stripped out and weighs under 1000kg then you would need alot less power!

i know you said you dont like figures but my car put our 115 fwkw and weighs around 1400kg with me in it and i only managed a 15.4 @ 150kmh even with better tires and launch id be lucky to do a mid to high 14.

still it a great effort :thumbsup:

blackdc2
28-04-2005, 10:15 AM
fair enough still you would have to be making 180 - 200fwkw to run that time and that is huge power for an n/a 1.8lt

unless of coarse it its stripped out and weighs under 1000kg then you would need alot less power!

i know you said you dont like figures but my car put our 115 fwkw and weighs around 1400kg with me in it and i only managed a 15.4 @ 150kmh even with better tires and launch id be lucky to do a mid to high 14.

still it a great effort :thumbsup:

when scrutineered the car weighed in at 1050kg plus my 84kg fat arse...

b series wont make anywhere near that power

DMT
28-04-2005, 10:28 AM
when scrutineered the car weighed in at 1050kg plus my 84kg fat arse...

b series wont make anywhere near that power

1134kg and a high 12's needs to be making some decent power!!

the slicks must make a big difference cause your 60ft time is awsome for a FWD

DynoDave
28-04-2005, 10:39 AM
fair enough still you would have to be making 180 - 200fwkw to run that time and that is huge power for an n/a 1.8lt

unless of coarse it its stripped out and weighs under 1000kg then you would need alot less power!

i know you said you dont like figures but my car put our 115 fwkw and weighs around 1400kg with me in it and i only managed a 15.4 @ 150kmh even with better tires and launch id be lucky to do a mid to high 14.

still it a great effort :thumbsup:
If you understand drag racing the MPH normally tells you what power it is making for a car of that weight ET's come from the chassis and tyre setups that each car uses it is that simple.
Regards Dyno Dave

DMT
28-04-2005, 11:13 AM
If you understand drag racing the MPH normally tells you what power it is making for a car of that weight ET's come from the chassis and tyre setups that each car uses it is that simple.
Regards Dyno Dave

i fully understand that and that is what makes it so impressive!!

he did a 12.9 @ 167kmh
in did 15.4 @ 150kmh

you would know that 17kmh doesnt normally = 2.5sec down the 1/4 so his chassis and tire setup were working very well! :thumbsup:

online
28-04-2005, 11:57 AM
i fully understand that and that is what makes it so impressive!!

he did a 12.9 @ 167kmh
in did 15.4 @ 150kmh

you would know that 17kmh doesnt normally = 2.5sec down the 1/4 so his chassis and tire setup were working very well! :thumbsup:

2.5 secs can usually be made up with a really good 60foot time, driver and driving style can make a huge difference..

congrats on the time, it's great to hear more Honda's are getting the ET's down.:thumbsup:

aus91integra
28-04-2005, 08:38 PM
Just curious what was in the other lane that ran 15s..

blackdc2
29-04-2005, 08:24 AM
Just curious what was in the other lane that ran 15s..

some skyline GTST

baboo
06-05-2005, 01:22 PM
Geez, that's some embarrassed skyline driver

[R]
06-05-2005, 04:16 PM
awesome time mate! poor skyline.. hehe..

civ_sik
06-05-2005, 04:37 PM
lol, good work man

JDM.Power
06-05-2005, 05:34 PM
nice work! keep it up

type one
08-05-2005, 12:15 PM
always knew the R was a good all round performer :)

awesome run.

91'lude
08-05-2005, 07:38 PM
I was just gunna say, that skyline must have had bad launch / traction problems, i was thinking maybe a v8, cos look at your MPH reading at the end... it was practically identical, yet you were 3 seconds ahead, couldnt it get traction?

Over the 800m, it probly would have caught up...

Hot time mate, is your car road drivable.. or has it had alot of weight reduction?

THRUST
08-05-2005, 11:08 PM
when scrutineered the car weighed in at 1050kg plus my 84kg fat arse...

b series wont make anywhere near that power

So its had some weight reduction right?

blackdc2
09-05-2005, 09:18 AM
So its had some weight reduction right?

well seeing as it came from the factory weighing 1080 or something like that, it only had a tiny bit of weight reduction.




Hot time mate, is your car road drivable..


it drives 99% as good as a stock one. that 1% being the clutch

edw-R
10-05-2005, 11:35 AM
Very great time. Hope you can do it better in the future. You are turbo eater.

G AE82
10-05-2005, 03:06 PM
Congrats. Great times. BTW did you run the car as is with street radials or drag radials beforehand?

EG5
17-05-2005, 07:59 AM
Congrats. Great times. BTW did you run the car as is with street radials or drag radials beforehand?

22x8x15 m/t slicks

SiR JDM
17-05-2005, 08:17 AM
Geez, that's some embarrassed skyline driver

Great work!

Ive heard alot about this car from Yonas, he was keeping me upto date pretty much in real time as you were doin the run! Nice to see you post up the sucsess.... 3rd fastest NA FWD in Australia i beleive? :rolleyes:

ALLMTR
29-05-2005, 01:33 AM
WOW, this slipped under my radar...

AWSUM, kicks the shit out of my old B20 power wise..

Big :thumbsup: actually have two :thumbsup: :thumbsup:

MPH is only 4 behind me and my car was 300kgs lighter :eek:

edw-R
03-06-2005, 06:45 PM
What rpm did you launch??

pgclee
04-06-2005, 08:37 PM
Wooo....I wonder when's my turn....hmmm....*Dreaming*...hmmmmm.....12 sec...yumm.....

blackdc2
06-06-2005, 09:57 AM
What rpm did you launch??

about 8000

xtercii
06-06-2005, 09:22 PM
It would be very interesting to know how fast would it run on street tyres.
what would you say blackdc2? low to mid 13s?
by the way what a great you had.

dc2r
07-06-2005, 03:18 AM
LOL @ 8000 launch...
and it is amazing how the ET for both cars and MPH is so different... 15 sec pass with a higher MPH than a 12 sec pass... makes u think what needs to be improved...

and a comment earlier about if the run was 800m that the other car would've caught up... i don't think so... well at least i don't anyway... coz blackdc2's car doesn't stop at that MPH either... who knows... maybe he would have a faster MPH at 800m than the other car?

congrats on the time anyway...

Da1nONLY
07-06-2005, 11:34 AM
fark... 8k launch....
i'll be pinging the redline if i did that lol....
congrats on the time dude!!
excellent time!!
wish i could achieve those times in my car! =)