learner
01-05-2005, 05:41 PM
hi all... was thinking just put 2 led for my RMS... but is gonna be very weird to just have 2 led on the dashboard... so... i bought a little toy car. put the led in as the head & fog light for da toy car...(:D got this idea when i was shopping at coles...:D saw this little nice :honda: civic)
step 1:... drill the holes on da car... i use 3mm led as fog light and 5mm super bright led for the head light. there isnt enough room for the 5mm led... so i have cut the wheel a bit to fit tat..
http://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/001.jpghttp://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/002.jpg
step 2: connect the led with the correct resistor on the (+) side of the led then try to fit it on da car
http://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/003.jpghttp://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/004.jpg
here is da pic after i put everything in...
i only use one (+) wire for all lights in there...
the other 2 wires is connect to the RSM... they are (-)
http://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/005.jpghttp://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/006.jpg
this is the end product... i think it looks ok....
(i will take off the stick tape later... on the side of da car)
http://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/007.jpghttp://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/008.jpg
http://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/009.jpghttp://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/010.jpg
here is how it look like when is operating
http://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/011.jpghttp://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/012.jpg
step 1:... drill the holes on da car... i use 3mm led as fog light and 5mm super bright led for the head light. there isnt enough room for the 5mm led... so i have cut the wheel a bit to fit tat..
http://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/001.jpghttp://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/002.jpg
step 2: connect the led with the correct resistor on the (+) side of the led then try to fit it on da car
http://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/003.jpghttp://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/004.jpg
here is da pic after i put everything in...
i only use one (+) wire for all lights in there...
the other 2 wires is connect to the RSM... they are (-)
http://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/005.jpghttp://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/006.jpg
this is the end product... i think it looks ok....
(i will take off the stick tape later... on the side of da car)
http://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/007.jpghttp://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/008.jpg
http://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/009.jpghttp://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/010.jpg
here is how it look like when is operating
http://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/011.jpghttp://members.iinet.net.au/~tommi/ozHonda/DIY_RSM/012.jpg