Installing headlight bulbs (H1) on a DC5

[TypeG]

How to install a H1 light bulb in dc5 headlight?
pls teach me

[Boost]

the users manual should show u how to change light bulbs..

[TypeG]

someone get some halogen from me but he said the manual is quite confuse so I am here to ask...

[CJL]

Try doing a search on www.clubrsx.com (http://www.clubrsx.com) they will more than likely have something...

Hope this helps

[sharo]

i did it myself before, wasnt hard, its just like how u do it for a jazz. u cant do it by simply opening the bonnet unless u gonna take off the whole headlight. what i did was taking off the plastic partition between the wheels and the engine, put ur hand in thru the under part of the fender, take off the rubber attaching to the bulb, undo the clip, and there u go..u can take the bulb out but of course have to be very careful. ANyway, thats just my own experience, not sure whether thats the proper way though.Good luck.

[JINRAI]

i did it myself before, wasnt hard, its just like how u do it for a jazz. u cant do it by simply opening the bonnet unless u gonna take off the whole headlight. what i did was taking off the plastic partition between the wheels and the engine, put ur hand in thru the under part of the fender, take off the rubber attaching to the bulb, undo the clip, and there u go..u can take the bulb out but of course have to be very careful. ANyway, thats just my own experience, not sure whether thats the proper way though.Good luck.

jeez, that doesn't sound right...did you read the manual? i think going from the top sounds easier

[TypeG]

where are u yesterday?
=(
it is possible to be the easiest way if u can access the bulb on top of the wheel coz that's what i did my for my jazz

[JINRAI]

sorry gazman...bball ended late...will come by tonight man...if its not raining k?

[MrThanh]

if you dont understand the users manual with PICS, im sorry nothing is going to help.

but basically:

1: open bonnet
2: remove plug
3: remove seal
4: push in metal clip, then push it up/down to unclip it
5: remove bulb

then replace bulb and do steps in reverse order.

[FunkyR]

i found it a little hard to do actually.....

[MrThanh]

first time round its difficult, but once u get the gist of it, it's pretty straight forward.