b20b
05-05-2005, 08:17 PM
I've had a thinner head gasket and slightly machined head fitted and I have noticed that when I set the crank on the top dead center mark my cam gears don't line up. I ve tried moving teeth but still doesnt line up. How do I adjust myadjustable cam gears to put the cams in there original posistion Stock location!!!!!!!!!!!!!!!!!!!!
It seems they are half a tooth out.
Someone told my to use dial gauges but what is the standard cam settings for type r cams,,,,,, is it 1mm of lift at top dead center
............................type r engine
What is right
It seems they are half a tooth out.
Someone told my to use dial gauges but what is the standard cam settings for type r cams,,,,,, is it 1mm of lift at top dead center
............................type r engine
What is right