The-Genesis
06-05-2005, 09:31 PM
:O (http://www.hondata.com/reflash_tsx.html)
Those improvements are damn nice.... can i buy one of these babies over here and get em fitted?
-------------------------------------------------------------------
* 5000 rpm VTEC point decreased from 6000 rpm
* 7600 rpm Rev limit, increased from 7300 rpm (for auto trans must be in sportshift mode)
* Maximum torque gain 26 ft/lbs torque at 6000 rpm
* Maximum power gain 29 hp at 6000 rpm
* Peak torque increases from 169ft/lbs at 4500 rpm to 175 ft pounds at 7500 rpm
* Peak power increases from 206 hp at 7100 rpm to 210 at 6800 rpm
* Very wide flat smooth torque curve. 90% of peak torque available from 2000-7000 rpm.
* Passes Californian smog testing (no measurable difference from stock)
* Fully dealer compatible - works with all Honda scan tools and equipment
The Hondata TSX reflash is designed for use with an intake and headers. It will work very well with a stock airbox and stock headers. Testing was done with a stock cat back system.
--------------------------------------------------------------------------
That is damn nice! That would be a very big improvement in performance i reken, if u can afford it.
Those improvements are damn nice.... can i buy one of these babies over here and get em fitted?
-------------------------------------------------------------------
* 5000 rpm VTEC point decreased from 6000 rpm
* 7600 rpm Rev limit, increased from 7300 rpm (for auto trans must be in sportshift mode)
* Maximum torque gain 26 ft/lbs torque at 6000 rpm
* Maximum power gain 29 hp at 6000 rpm
* Peak torque increases from 169ft/lbs at 4500 rpm to 175 ft pounds at 7500 rpm
* Peak power increases from 206 hp at 7100 rpm to 210 at 6800 rpm
* Very wide flat smooth torque curve. 90% of peak torque available from 2000-7000 rpm.
* Passes Californian smog testing (no measurable difference from stock)
* Fully dealer compatible - works with all Honda scan tools and equipment
The Hondata TSX reflash is designed for use with an intake and headers. It will work very well with a stock airbox and stock headers. Testing was done with a stock cat back system.
--------------------------------------------------------------------------
That is damn nice! That would be a very big improvement in performance i reken, if u can afford it.