View Full Version : Crx Turbo!!!
hybn8
09-05-2005, 07:33 PM
Hey guys.
Im interested in putting a turbo kit into my crx d16. Does anyone know how much roughly it would cost me? What turbo/ecu/manifold do i use? How much psi can i run with standard internals without blowing anything? Anyone here do custom turbo kits??
Thanks guys.. :honda:
shecomb
10-05-2005, 08:20 AM
It will cost $10k to do it right. For ECU try standalone like Hondata or Autronic. For a d16 a t3 size turbo would spool nice and fast and be good for 9psi on a stock block.
RUDEF2
10-05-2005, 01:53 PM
Ive seen D16 turbo kits going for $1500-$2000 in thomastown but he is right if you want it done right it will cost anything up to 8k-10k unless you know what you are doing then it might only cost you for the kit ecu etc
Clarkey
panda[cRx]
10-05-2005, 02:23 PM
PM jonston on crxaustralia man. ACS are the kings of boosted gen2's in aus ;)
Pm Pornstar, he does custom turbo kits..
nickiipoohz
10-05-2005, 06:41 PM
whats the place down thomas town called? and do u guys know
if they do it for h22?
saxman
16-05-2005, 12:40 PM
depending on turbo choice and most importantly, tune, a stock d16z6 can easily hold 10 psi. There are several here in the states running 230+whp on stock blocked d's
also, look into uberdata for ecu management... all the options of hondata without the rediculous cost.
tRipitaka
16-05-2005, 12:51 PM
whats the place down thomas town called? and do u guys know
if they do it for h22?
u'd probably be thinking razztech..
BLKCRX
16-05-2005, 12:53 PM
Razztech is in thomastown.. on the hume highway...
Regards james
Nikki
16-05-2005, 07:35 PM
only do tha if your willing to upgrade everything else now... but yea 6k ( crappy parts etc) or up to 10-12 for a decent job
huytek
16-05-2005, 08:12 PM
depends wat he wants to boost at
arnd 6k is good for 6psi and thats using piggyback
10-12k??...thats goin a bit out there\
but yea....go for standalone ecu....\
a bit off topic but n e one here used a Power FC for a turbo'd honda?
CRXY01
16-05-2005, 11:47 PM
']PM jonston on crxaustralia man. ACS are the kings of boosted gen2's in aus ;)
They certainly have the proof with the cars that they have produced :D
i_own_you
17-05-2005, 01:33 AM
depending on turbo choice and most importantly, tune, a stock d16z6 can easily hold 10 psi. There are several here in the states running 230+whp on stock blocked d's
someone enlighten me with specs of the d16z6 please.
or is it the equivalent of a d16a8 ??
pornstar
17-05-2005, 02:53 AM
u can get a conversion with a full standalone done for as low as 4k, if u hear any different, im only too glad to show u that its been done, and done well before.
saxman
17-05-2005, 04:43 AM
someone enlighten me with specs of the d16z6 please.
or is it the equivalent of a d16a8 ??
d16z6 is basically the top of the line OBD1 d16... somewhat the same as the obd2 d16y8
125hp, 9.2:1 compression, SOHC VTEC, 7200 rpm red line, etc
i_own_you
17-05-2005, 10:30 AM
ohhh.. thanx dude
panda[cRx]
17-05-2005, 01:03 PM
They certainly have the proof with the cars that they have produced :D
247kw at the wheels and 11.47 quarter mile if i remember correctly;)
pornstar
17-05-2005, 03:58 PM
']247kw at the wheels and 11.47 quarter mile if i remember correctly;)
11.7 lawz...
but spend and talk alot less than other crap we see ;)
panda[cRx]
17-05-2005, 08:27 PM
yeah yeah thats what i meant... typo!
it was 11.74 :p
yeah same speed for half the price ;)
GSI-PSI
18-05-2005, 06:54 PM
do u really wanna go that crazy with ya turbo man. I spent 5k on mine and it went awesome.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.