putting a new aftermarket steering wheel on the eg

[timmya2]

whats the best way to tackle this?

any special screws i have to look out for..

also how do i connect up the horn wires?

anyone from quakers hill wanna help me out :)

ill give ya 12 dollars for your troubles.
:D

[hoonda]

just a warning- if your car is airbag equipt (ie is a Vti), then you cant change the steering wheel. Cops will rape you for it (removal of saftey device- its like taking out the seat belts).

but if your car has no airbag, then carry on (but sorry, i cant help!).

[timmya2]

no airbag.. its an EG hatch :)

[panda[cRx]]

its fairly simple if you have no airbag man. just pop ur :honda: badge off the middle and unscrew it and take it off. put ur boss kit on then line you wheel up nice and screw it back on (usually alan key screws) well thats what i did on my car anyway:p

from memory i didnt have to connect any wires on mine as its done by a piece of metal. sorry if thats not much help but i did it over a year ago, it took all of 5-10 mins and was very simple man. just have a go at it, whats the worst that could happen? :)

[Kawasaki]

there was a thread about this ages ago, just search it man

[aimre]

all u need is a screw driver ( to jimmy the H badge out)
a 18 or 19mm socket and extensions (coz its deep in the wheel)
then whack on the boss kit..... simple

[garett]

the biggest prick is getting the wheel perfectly straight, when i put one on i allways go for a drive with my socket and rachet and keep pulling over until you get it right
cos even one tooth makes a difference