View Full Version : A question for TODA_AU?
epren
21-01-2004, 11:49 PM
From your post here and in clubrsx, it seems that your very informative and knowledgeable about performance. What works and what doesnt and so on. Ok heres the question :
Who is you Engine Builder, Head Porter and Tuner?
How much for labor(ball park figure ) ?
for example : change pistons?
swap for bigger block b16 > b18?
head porting ?
camshaft fitting etc ?
For other members just list down your engine builder, head porter and tuner. Their name, address, phone number and especially credentials or testimonials :) It would be good too to list down engine builders to avoid too. Hopefully this will turn out to be informative for everyone on this forum.
epren ;)
genesis
22-01-2004, 10:38 AM
Dude.. he is the engine builder, etc
tinkerbell
22-01-2004, 10:54 AM
From your post here and in clubrsx, it seems that your very informative and knowledgeable about performance. What works and what doesnt and so on. Ok heres the question :
Who is you Engine Builder, Head Porter and Tuner?
How much for labor(ball park figure ) ?
for example : change pistons?
swap for bigger block b16 > b18?
head porting ?
camshaft fitting etc ?
For other members just list down your engine builder, head porter and tuner. Their name, address, phone number and especially credentials or testimonials :) It would be good too to list down engine builders to avoid too. Hopefully this will turn out to be informative for everyone on this forum.
epren ;)
ROFLMAO
FARKEN FUNNYEST SHIT EVER!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
tinkerbell
22-01-2004, 10:57 AM
engine builder: tinkerbell
head porter: tinkerbell
tuner: CRD, Dave Flood, tinkerbell
max power: 110kw atw on dyno dynamics
best ET: 14.299 @ 96.89mph
TODA AU
25-01-2004, 08:07 AM
G’day Epren,
Workshop address…
ADVAN Performance Centre
137 Silverwater Road, Silverwater, N.S.W. 2128
Ph: 02 96471326
Engine building, head porter, tuner etc… No problem...
Labour is charged at $70 per hour…
u mad?
10-02-2016, 04:19 PM
70 bucks an hour, cheap as chips
Vvvtec
10-02-2016, 10:46 PM
I'll build you a motor for $70 outright
i need to eat
connorling
11-02-2016, 10:43 AM
I'll build you a motor for $70 outright
i need to eat
would you sell me Toda coilovers?
RenzokukenJ
11-02-2016, 12:54 PM
I'll build you a motor for $70 outright
i need to eat
You can eat my fish burger
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.