PDA

View Full Version : Need help guys - window


hong_ung
25-05-2005, 02:17 PM
Hey guys
something is creaking and its shitting me
When i wind up the window on the driver side, it feels as if something is pulling against the window, making it struggle to close

Also, when I drive the car, i can hear something loose and moving

Does anyone know how to remove the door trim
any help/pics would be gretly appreciated
Also, my driver side windows is slow slow closing
any ideas?

Thanks guys, Hong
Hondavirgin
25-05-2005, 02:48 PM
http://www.team-integra.net/sections/articles/showArticle.asp?ArticleID=552

i gotta get around to fixing this myself.........
fried
25-05-2005, 03:35 PM
standard integra problem.
ITRBoI
25-05-2005, 03:43 PM
your window motor is probably on its way out, might need a new one, i have the same problem with my dc2r, but on the passanger side, got it check out and it's the window motor
olda
25-05-2005, 06:27 PM
standard integra problem.

The glass run in the door frame dislodged itself and is now jamming the glass.
Not an easy fix!
Take it to Honda! :cool:
nipnip
25-05-2005, 06:28 PM
just go to supercheap auto, tell the guy that the rubber around you windows have dried up, and he should tell you to use some sort of silicon spray (i do not recall with one), it should fix the dry rubber problem. i had this happen to my windows too, and after i hosed it down, problem gone
hong_ung
26-05-2005, 12:47 AM
Cheers guys
ill take a look at it at the end of the week
Hondavirgin
26-05-2005, 03:06 PM
The glass run in the door frame dislodged itself and is now jamming the glass.
Not an easy fix!
Take it to Honda! :cool:

is it really not easy? it looked pretty easy in that team integra article.....
civiceg9
26-05-2005, 03:46 PM
take the trim off and u can fix the dislodge, but you will need small hands
probably will end up with a few scratches and cuts on your hand. Is a pain to fix window problems.
nipnip
27-05-2005, 03:11 PM
btw, found out what spray i used. its just a typical silicon spray. worked like magic with my windows

if you had the same problem as i did, this should work
edw-R
27-05-2005, 10:16 PM
DIY is the best way to know your car more.
hong_ung
28-05-2005, 12:10 AM
your window motor is probably on its way out, might need a new one, i have the same problem with my dc2r, but on the passanger side, got it check out and it's the window motor

Yup guess ur right
i opened te panel today and ested it out
the motor is struggling when closing the window
i sprayed the ol wd40 to smoothen it up a bit
i also titened the bolts that held the window, but the window still movess....