h22a type S for accord

[accordforlife]

hey,
just wondering has anyone put a h22a type s on there 5 gen accord?? coz autorichtech is selling one for 3500 for a front cut?? if i do wanna buy the type s is it just simple as putting a h22a?? any mods need for a type s to put on a accord?

[poid]

its exactly the same as far as install goes. Not worth it if you ask me, the type S is only 20hp more powerful

[accordforlife]

wat has the type s got that makes 20hp more??its not worth itand save the 5oo bucks?

[accordforlife]

this type s got 60000 ks on it

[VTEC96]

iv been told that wiring is bit different compared to normal h22

[MR-VTEC]

wat has the type s got that makes 20hp more???

you can consider the type s engine to the h22a like a vti-r integra engine to a type r intergra engine.

to get the extra power the type s engine recieved the following -


port and polish
different pistons that increased compression from 10.6 to 11.0
valve timing, lift and duration were also adjusted
it recieved a better shaped intake
larger throttle body
larger, more free flowing exhaust manifold
it also recieved a few various other things that i no doubtedly missed out but these are the major ones that spring to mind.

[Chris_F]

if its only 500 extra go for it. it'd cost you at least 500 to make up that 20hp later on

[SV4]

ermm i might sound like an absolute noob but i havn't heard of the hype s h22a before? are you saying its like a type r of the h22's compared to like a vti-r...ie better?

[MR-VTEC]

yep thats right the type s h22a engine is a more refined more powerful engine, much like an type r integra engine.

[MR-VTEC]

take a look at this thread - http://www.preludeaustralia.com/articles/h22vsh22a.htm

it is about the h22a vs the h22a type s

[accordforlife]

well gotta call the guy who is gonna do the conversion on monday if he could do it?? hope is easy as normal h22a, waiting for a reply of autorichtech about the h22a type s anyone know how much will it for to be ship in bris?? anyone here got the h22a type s on there accord??

[h22a accord]

go for it. My h22a front cut cost me 3200 plus 300 shipping from adelaide to wagga so to get a type s for 3500 is an absolute bargain.

I dont think the type s wiring will be any different to normal h22a wiring...why would it be?

[mr_mojo02]

where on earth are u getting it from.. i want one!!

do it for sure man!

[vinhy]

just watch out because u dunt no the condition of the engine. get ur mechanic to check the engine thoughly

[filoaccord]

about this h22a typen s my mate seen one on a wreckers for 3500 half cut its a 98 model will it fit on a 94 accord and if your car is auto is it hard to put a clutch pedal?? is there like bolts and hole on auto tranny for the clutch??

[CHU85]

i'm very sure that type s motors are out of the newer shape preludes therefore u have to get the obd2 wiring harness adapted to urs.

[mr_mojo02]

yea they are from 97 onwards

[filoaccord]

has anyone done this on a accord before?

[nickiipoohz]

dunno if anyones done it. should fit fine (engine dimensions arent different). heard the type S preludes go pretty hard so u're car should boogie after the conversion. keep us updated.

[filoaccord]

got to wait till my mech says he can do the type s if not gotta stick to h22a instead, mech said wiring is much harder then the h22a


dunno if anyones done it. should fit fine (engine dimensions arent different). heard the type S preludes go pretty hard so u're car should boogie after the conversion. keep us updated.

[j-specAccord]

the H22A type S has an OBD2 ECU check out HASport for the conversion wiring harness that converts the OBD2 ECU to an OBD1 which is the ECU that came in the 92-96 preludes which is basically a plug in with the 5th gen harness except for four wires that need to be re wired from the sensors to the ECU

[h22a accord]

go for it. My h22a front cut cost me 3200 plus 300 shipping from adelaide to wagga so to get a type s for 3500 is an absolute bargain.

I dont think the type s wiring will be any different to normal h22a wiring...why would it be?


oops, i forgot abouth the conversion from obd1 to obd2.......