AUX input

[loo]

Anyone know where to get and install AUX input cable in Jazz? or maybe the cable is available outside AU like HK? Wanna use my mp3 player to play music :cool:

[spoon fit]

the only way.... honda japan

[JA22]

i am thinking of connecting my ipod to the AUX as well.

[spoon fit]

http://www.ozhonda.com/forum/showthread.php?t=20257&page=2&pp=12&highlight=aux

[bigdongers]

what kind of plug does the Jazz have for the CD Stacker? If its the same as the Euro, you might be able to use a SNHOND3 http://www.ozhonda.com/forum/showthread.php?t=20825

They sell lots of similar types of adaptors in the US. we just need to find out if the Jazz plug is the same as any other Honda and just buy that plug

[loo]

Was thinking to contact Honda Japan but I couldn't find a customer service email address at its website...

if someone know Japanese please do me a favour...Thanks!

[JA22]

i have just emailed Soundgate and hope they can provide some info on this. i know there is no jazz/fit in the states but just see what the reply is. i mean there is no harm trying

personally, i reckon the headunit will be using the same kind of plug. as can be seen from the file as follows, SNHOND3 is applicable to most honda models. http://www.soundgate.com/upload/productdocuments/0188.pdf

i hope this can bring good news. i am using itrip now and the sound quality is just not there, but still acceptable to me. of course if there is a better option, i'll go for it.

[OptionEngineering]

change the JDM double din wont b4 a lot easier if u really after mp3

[spoon fit]

Was thinking to contact Honda Japan but I couldn't find a customer service email address at its website... (it won't help unless u r in japan)

if someone know Japanese please do me a favour...Thanks!



change the JDM double din wont b4 a lot easier if u really after mp3

[kuso]

I kinda like the 04' jazz integrated head unit. A aftermarket mp3 player usually looks crap and tachy and cheap... unless you buy something expensive - like a $500+ mp3 head unit.

[spoon fit]

i like mine one
前期
http://img167.auctions.yahoo.co.jp/users/0/1/3/0/eiki2193-img600x450-1116342662p1020585.jpg
後期
http://img153.auctions.yahoo.co.jp/users/7/9/0/0/rushautogarage-img600x450-1114066488fit2.jpg

[JA22]

i am begining to like the original panel and that is why i am exploring other options instead of changing to a jdm double din panel.

besides, i already have the ipod and therefore it will be good if i can connect it to the headunit and play mp3s. really hope the soundgate adaptor can do the job!

[asiansquad]

the older design looks better than the new one

[MRFIT]

wanna swap asiansquad??

[JA22]

i have taken the hu off and have a look inside just now. i found that we can actually diy the aux input and its actually quite simple. i am going to source for the parts and make 1 tomorrow. the entire job will cost less than $15 or $20. i am trying to get this done below $10. but taking the hu out was a big task and my fingers are hurting now! :(

i shall write a more detail post with pictures and all the things that are required once i get my ipod connected. hopefully i can get everything working by tomorrow evening. :D

[^CarBoy^]

Way to go Ja22!!! :)

[ahcash]

i have taken the hu off and have a look inside just now. i found that we can actually diy the aux input and its actually quite simple. i am going to source for the parts and make 1 tomorrow. the entire job will cost less than $15 or $20. i am trying to get this done below $10. but taking the hu out was a big task and my fingers are hurting now! :(

i shall write a more detail post with pictures and all the things that are required once i get my ipod connected. hopefully i can get everything working by tomorrow evening. :D


:thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup:
Good on you mate...!!!!

[JA22]

:thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup:
Good on you mate...!!!!
but you need to teach me how to upload pictures again! :D
i tried your method and still cant get the pictures up there :(
maybe i'll email u the pictures and you can upload for me :)

[ahcash]

No Problem... Email me.. I have PM you my email address.. :thumbsup:

[loo]

That's very good news :thumbsup:

But why no AUX in from factory if it's so simple to do so :confused:

[JA22]

beats me :confused:

[JA22]

No Problem... Email me.. I have PM you my email address.. :thumbsup:
pm received and pm sent as well
i'll try to send you the pictures tomorrow night or on friday, depending on when i can get it working.
thks for helping :)

[kuso]

can u send me the pics? Hahahah

I wanna see

I wanna do it too

[JA22]

can u send me the pics? Hahahah

I wanna see

I wanna do it too
no problem kuso
i can send the pics to you as well
you guys can see the actual thing when we meet up after your exams! good luck!

p.s: i cant get into brisbane fitta'er club. something wrong with it at the moment?

[kuso]

yea down for some reason... dont know why... send me by email ^^

emailed pm'ed to you

[kuso]

you didn't email them to me *sob sob*

[JA22]

you didn't email them to me *sob sob*
sorry the pictures are not ready yet. :D
i will email you by tonight or tomorrow. :)

[JA22]

i have got my ipod connected to aux finally! sorting out the pictures now and will post a detail write up as soon as i can.

i am a happy man! hehe

[kuso]

nice nice >< can't wait to see your pics

[loo]

What a great job you've done JA22!!

[Dreams]

nice, waiting for pics to see. how much did it ended up? tu bux? tlee bux? hehe

[spoon fit]

nice nice >< can't wait to see your pics

[JA22]

the parts only cost me less than $8. i do not need to purchase the rca cables which cost $14 at dick smiths as i got them from a friend for free. so in total if inclusive of the rca cables, it would cost about $22 for this diy.

[spoon fit]

the parts only cost me less than $8. i do not need to purchase the rca cables which cost $14 at dick smiths as i got them from a friend for free. so in total if inclusive of the rca cables, it would cost about $22 for this diy.


pic? :wave:

[JA22]

i'll try to post the detail write up with pics by tomorrow :)

[ahcash]

http://img118.echo.cx/img118/3408/resizeofmyipod0ht.th.jpg (http://img118.echo.cx/my.php?image=resizeofmyipod0ht.jpg)

My IPOD is ready man... where are the pictures... :D :D

[JA22]

http://img118.echo.cx/img118/3408/resizeofmyipod0ht.th.jpg (http://img118.echo.cx/my.php?image=resizeofmyipod0ht.jpg)

My IPOD is ready man... where are the pictures... :D :D
hahahaha

[Philip Lee]

i do not need to purchase the rca cables which cost $14 at dick smiths as i got them from a friend for free. so in total if inclusive of the rca cables, it would cost about $22 for this diy.

is this special kind os RCA cable??? they are so cheap at JB. $5 for 5 metres.

[JA22]

is this special kind os RCA cable??? they are so cheap at JB. $5 for 5 metres.
its jus a normal rca to 3.5mm stereo cable. you should be able to get it cheaper elsewhere but dick smith was nearest to me last night :D

[ahcash]

Good write up... :thumbsup: :thumbsup: :thumbsup:

[spoon fit]

too long~~

[JA22]

too long~~
sorry mate
i was just trying to feed as much info as i can

[spoon fit]

sorry mate
i was just trying to feed as much info as i can

is ok :thumbsup: :D

[Dreams]

nice write up!. thanks for sharing, too bad idont like iPOTs.

[spoon fit]

nice write up!. thanks for sharing, too bad idont like iPOTs.

same as me ;)

[chan]

have u guys fixed the problem yet? if not, check them out

http://www.pie.net/

[MRFIT]

great writeup......... I don't think I will attempt it myself...... :(

[Philip Lee]

the worst part of the DIY is getting the HU off. it's such a p-in-b...

[Philip Lee]

too long~~

don't read it then....

[Philip Lee]

sorry mate
i was just trying to feed as much info as i can

y feel sorry?? it's not as if u're obliged to share your knowledge. ;)

[JA22]

the worst part of the DIY is getting the HU off. it's such a p-in-b...
yeah, such a real pain!
i like your idea of removing most of the catches and just leave a couple of them back in the hu. i'll do the same if i remove the hu again :D

[Fit1500_GD3]

the only way.... honda japan

:D :D :D

http://a0.cpimg.com/image/38/6D/48936760-cbf1-028001E0-.jpg

[Philip Lee]

yeah, such a real pain!
i like your idea of removing most of the catches and just leave a couple of them back in the hu. i'll do the same if i remove the hu again :D

it's not a really good idea actually. there is now a little gab at the bottom of the hu but it's not too visible. can be fixed if i re-do those 2 bolts but i couldn't be bothered at this stage. when it rattles, i'll fix it. :cool:

[spoon fit]

don't read it then....


:thumbdwn: :rolleyes:

[spoon fit]

:D :D :D

http://a0.cpimg.com/image/38/6D/48936760-cbf1-028001E0-.jpg


show us ur one...Fit1500_GD3

[Philip Lee]

:thumbdwn: :rolleyes:

if u can't appreciate other people's time & effort, you should expect replies like that!!!

"too long" as a reply on its own is too rude & shows that you lack character and immature. JA22 gave up his time to share his experience and all you can offer is crap like this???? :thumbdwn: :thumbdwn: :thumbdwn: :thumbdwn: :thumbdwn: :thumbdwn:

it's very simple. if you think it's too long, just don't read it!!!! and keep such smart-axx comments to yourself cos we don't want to know.

ps. to others, sorry for the OT.

[JA22]

thks for supporting me philip
my very intention of sharing this diy seems to have attract some negative feedbacks and i didn't know that this post can cause some stir here. either my diy is totally useless or the guys in this forum are simply too good.

anyway i have deleted my diy post to prevent anymore unhappy posts. i didn't know that sharing in this club can be that difficult. now that i know for myself......

philip, thanks again for standing up for me. :) :thumbsup:

[ahcash]

I am pretty sure spoonie doesn't mean it... :thumbsup: No hard feeling Ja22..

[JA22]

hey ahcash

no problem. as i mentioned to you over our msn chat, i really didn't put this matter to heart. i just don't want to see any more unhappy posts and philip getting caught into something out of nothing. :)

[tonmasi]

I am sorry, but I can't find the write up.. :confused:

[spoon fit]

I am sorry, but I can't find the write up.. :confused:

my fault, JA22 deleted

[kimo]

Anyone know where to get and install AUX input cable in Jazz? or maybe the cable is available outside AU like HK? Wanna use my mp3 player to play music :cool:


Check this out:

http://reviews.cnet.com/4520-10895_7-6212328-1.html?tag=archive

[JA22]

Check this out:

http://reviews.cnet.com/4520-10895_7-6212328-1.html?tag=archive
you still need an AUX Input for that.

[bigdongers]

JA22 can you repost it please? Its certainly helpful info for all Jazz users out there.

Please!!

[ahcash]

JA22 can you repost it please? Its certainly helpful info for all Jazz users out there.

Please!!


Check below...

[JA22]

yeah, please visit BNE Fitta'er Club for the diy write up.

[kuso]

thnx cashie!!! :D:D:D:D:D:D:D

[ahcash]

man if u are to link to the site.. link it properly. The link is http://fittaer.spydar.com

OK.. I withdraw my post.

[kev]

Hi everyone,

http://fittaer.spydar.com was down for couple of days, does any one can pm me the write up or step by step photos?

Thx and appreciate

[606cat]

hi all!
fittaer was still down so i can't find the article either
would anyone else have another copy by chance?

[kuso]

i think the only thing you can do now is wait for it to come back up. fittaer is down due to server problems... and hopefully that will be sorted out sometime soon.

[606cat]

thanks kuso and ja22!

[kimo]

I still don't undertsand how to fit I-pod in ur HU. What is need.

I found those products:
http://www.soundgate.com/index.php?request=category.index&categoryid=18&
http://store.yahoo.com/logjam/piehon03pcpod.html
http://www.pie.net/applepie.cfm

So which one I use, or is there other way.
Please help me

[606cat]

there's another way
check out the fittaer singapore forum

[kimo]

there's another way
check out the fittaer singapore forum


The site is down

[Philip Lee]

the info is back up at the Fitta'er Australia site:

http://ausfit.proboards37.com/index.cgi?board=diy&action=display&thread=1122253145

[Jezzah]

Jst wanna know what type of RCA cables are used?
when i sut out my RCA cables they have like 2 wires wraped around one another. (1 wire wraped around the other )

now im confused,, help please

[papaya]

try asking in here.. http://ausfit.proboards37.com

Some of the guys who already done this can help you out there...