PDA

View Full Version : EG Door Trims


michael_antoi
10-06-2005, 10:08 AM
I drive a breeze and it has no power options.


I need new door trims and was wondering if trims from a civic with power options would fit..?


I'm assuming the window winder would get in the way so if i remove that and install power windows would it work then?
garett
10-06-2005, 02:07 PM
i have a breeze too.
i have been under the impression it can be done however you need
- new door trim with the buttons in the handle, the motor thing which makes it go up or down and the wiring, or you could do it yourself, i dont think ti would be that hard
you will need to salvage all the stuff out of another civic hatch
could be costly....?
Zdster
10-06-2005, 02:37 PM
Well not being model specific, to convert to just power windows (I assume that is all that you want to do) you will need:

-Window switch,
-Door wiring,
-Power window regulator,
-Power window motor (for the regulator if it does not come with one)
-Interior door trim (from a power window model breeze - or you could try and make your existing one work I suppose)

-And then you need to decide how to power it so you may or may not need a floor harness.

If you search on Honda-Tech.com there are multiple articles/threads on how install power options (just do a search).
michael_antoi
10-06-2005, 02:48 PM
yeh i was just wondering if the actual door trim would fit

from a power window model hatch?

I noticed ur selling civic lips..

so u have a pm.
Zdster
10-06-2005, 02:54 PM
Not really sure what trim will fit but here are a few links from Honda-Tech that may help:

http://www.honda-tech.com/zerothread?id=830651

http://www.honda-tech.com/zerothread?id=1065575

Hope that helps.
michael_antoi
16-06-2005, 05:09 PM
does anyone know if the trims in this link will fit my eg hatch?

http://www.ozhonda.com/forum/showthread.php?t=20890
tRipitaka
16-06-2005, 05:15 PM
no, they won't..
unless ur willing to do some modding
<sloth>
16-06-2005, 06:03 PM
i have seen a breeze wth power windows and they obviously used the original door trims because the hole for the window winder was still there.....

so it can be done. maybe just get that part of the door trim re covered in leather??

hope this helps