View Full Version : Rip Gearbox
LS Integra
21-06-2005, 02:20 PM
i went 2the mechanic today and he told me that "it sounds my cluster gear is gone" bring it back on friday when i have some time to take a proper look at it, its making all retarded noises n crap..
just wondering how much am i looking at?
where are some honda wreckers in syd that would have a LS?
anyone else had the same problem?
wynode
21-06-2005, 03:18 PM
What's a cluster gear?
Can you describe your problem for us?
LS Integra
21-06-2005, 03:35 PM
i got no idea wat a cluster gear is my mate sed "its like the little gears inside the box" whatever that means? :s
well like when it gets over 3-4k rpm, this weird noise starts.. when i downshift its loud as and when im idle, theres like a ticking kinda noise, n when i put my foot on the clutch and dis-engaged the gearbox its gone.. so yeh :S
wynode
21-06-2005, 03:40 PM
Sounds like an input shaft bearing...
http://www.ozhonda.com/forum/showthread.php?t=22583
There is a whining / whirring noise when driving (gets louder as I accerate) but goes away when I put the clutch in (disengage it).
This tends to point to a worn input shaft bearing (ISB) or other bearing within the gearbox. The ISB is the most common to fail. The best way to diagnose this is to let the car idle and listen for the noise. Then put the clutch pedal in (disengage the clutch) and you will probably notice that the noise will die out. A very slight noise is OK however if it is very loud and noticable you will want to change your bearing(s) before they fail.
Fix (for a D-series.....but same deal pretty much)
http://www.ozhonda.com/forum/showthread.php?t=12789&highlight=input+shaft
LS Integra
21-06-2005, 06:47 PM
lol that sounds a lot cheaper than a new gearbox.. hahaahaha :)
SKREMN
21-06-2005, 07:12 PM
Let me know how much youll be looking at i've got a box in my car thatscoming out in about in the next week might be cheeper than yours i had it serviced 15,000 ago all new bearings
bennyBear
21-06-2005, 11:01 PM
haha, welcome friend! crapping gearboxes is my specialty, lol
If the noise goes away when you engage the clutch, that rules out the thrust bearing, sounds like it may be the main bearing, same thing happened to mine after i installed my short shifter.
I got a full re-build and forge in Adelaide for around $1500. ! good luck, hopefully it's something small!
LS Integra
26-06-2005, 03:32 PM
my car still aint back.. its guna b there til at least tues.. n i havent even heard from d mechanic yet.. i fink he bailed n went 2mexico or sumfin :(
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.