civic down need help

[all_motor_baby]

hey guys i just bought a body kit last week and already im havin problems, the cars a honda civic EG8 sedan, the cars already low while sitting on stock springs/shock. The kits awsome except the front bar, its way to low :mad: and it scraps over some humps, is there something i can do or put under the front bar to give it a lil more protection :) ?? i saw a 200sx with some black plastic under the lip to stop it from scraping to i guess, is there anything for honda's out there???

[J-MuN]

not sure bout putting anything on ur lip... the black thing on the lip might have just been a black lip...

JDM styles :p but i have the same problem, except mines the OEM CTR lip.. :(

[_CiVIC_]

how low is it to the ground? can't you take the humps on a little angle?? My civic used to be 7cm off the ground at its lowest point which was the front, I just simply took the humps on a slight and angle to get over them.

[[T][L]]

yeah go in a angle and at a slow paste...this way u have less chance of scraping it

[alphabeatsco]

Ialso Have Da Same Problems
My Kit If All Scraped...
Even On Angle.

[all_motor_baby]

well its roughly about 6-7 cm off the ground as awell same as "_CIVIC_" if you measure from the middle but if you measure from the end its 5cm :( , but the only thing is, on my front bar instead of the bottom being dead straight like most usualy are mine droops down towards the end, take a look at the first pic.
http://www.ozhonda.com/forum/showthread.php?t=22232&page=1&pp=12
so even angling wont really work, i dont think the black plastic was for jdm styles :D lol cause when i looked i could see where it was screwed on, but hey maybe im wrong :p lol