D-Series 400m Times.

[KB]

Hey all!

Just finished competing in our clubs annual drag event. Im absoultly ****ing stoked. Pulled a 15.362 Seconds @ 143.39 Km/h in my EJ8 D16y8. 60 foot time was 2.406. WooHoo. Mods are I/H/E. :D


Can some other D-series People post there times!

-KB *Happy*

[EG5[KRT]]

far out thats pretty good...

is this the d series twin cam non vtec ???

or the d series single cam vtec ?

[tRipitaka]

SOHC vtec i believe

[D16Y]

yeah ej8 = d16y8 = sohc vtec

great time!!!

[JDMTMY]

its a sohc vtec!...nice times yO!

[KB]

Cheers Boys!

Yes my engine is SOHC VTEC.

[EG5[KRT]]

ok im confused in which car ??? ej8 ??? wat is that ???

[D16Y]

civic coupe vti 96-98

[EG5[KRT]]

oh ok cool... i knew those went pretty fast.

coz my friend has a sohc vtec in his eg but its d16y1

just got confused for a bit there .. but thanks for clearing it up for me .

[D16Y]

np!

[KB]

yup EJ8 = EK shape coupe. EJ1 = EG shaped Coupe

[barefootbonzai]

WTF!!! that is one fast time for a SOHC Vtec. That is quicker than a lot of B16's with same mods. Did you pull that time many times????

[KB]

Yeh I had 5 runs in total.

1 - 15.490
2 - 15.486
3 - 15.443
4 - 15.479
5 - 15.362

Ohh and FYI I had a semi stripped interior.

[barefootbonzai]

Still, with semi stripped interior that is real quick.

[KB]

Cheers!

Getting times like this inspired me not to turbo or do a B-Series Swap. But save up for Clutch/Flywheel/Camshaft/VAFCII. I wanna break 14's in the D16.

[KB]

All I need is money :(

[JDM.Power]

congrats! an that is a quick time for a SOHC vtec!! topjob mate!

[bennjamin]

dont forget to poist up in the timeslips *CLICK HERE* (http://www.ozhonda.com/forum/timeslips.php?) section.


BTW - 15.362 is very good . . . not far behind a certain blacksheepZC running around here.

So , I/H/E = CAI , full header + full exhust system - stock everything else ?
Please expand on your combo - my own engine , being a d16a8 - and known to be quite abit faster poitn to poitn this gives me hope :)

[EG5]

My Eg hatch Si d16a8 fastest 1/4 mile time :

15.100@143.52 k/mh
2.1 sec 60ft.

[dudeling7]

That is a very nice time man well done :thumbsup: Dont EM1's do about 15's? You'll be close to them, go the d-series! hehe :D

[siba]

sik man i have the same car, engine n just curiuos as to what exact brands sizes u have for those mods?? wouldnt mind myn being that quick. cheers bud

[Terry]

Top job mate....:thumbsup: ....top job! D16Y8 SOHC VTEC is cool!:D

[egSi]

well done kyle, that is an awesome time, im very impressed, next time u do a time like that please tell me and put a sticker on the back :p ;)

lol.

well done man, post a pic of your beast here too :thumbsup:

[typicalmale]

congrats!! go the d16y8!
man i gotta put more money into my car now! haha

[type one]

don't underestaimate the d series fellas... awesome engine...

[Mr. Focus]

very cool indeed! will let ya know how my d16a8 powered CRX goes in a few weeks :D

[vtecchie]

Good stuff man!

So spill the beans, what i/h/e are you using? :D


Whats a stock time for EJ8 supposed to be?

[EG5]

with better launch you can improve your 60ft and beat my 15.1 d16a8 dohc or break into 14s. Nice time anyway.

[egSi]

september 18th :thumbsup:

[Mr. Focus]

thats Jamboree aint it trav??

[_CiVIC_]

any turbo d-series going around????

[Mr. Focus]

hopefully by Jamboree there will be :D My t28 gets a rebuild this week and i get my manifold next wednesday. I have a cooler, dump pipe and BOV waiting. just gota get it all put on now

[_CiVIC_]

awesome dude!! let us know how it goes.. I was contemplating putting turbo on my d-series civic, but some people are saying the motor isn't stable enough for one :rolleyes: somethings about conrods smashing or something.. whats your input on this?

cheers,
alfy.

[Mr. Focus]

some opinions i got on boosting the d
http://www.ozhonda.com/forum/showthread.php?t=22597

it should be ok with low boost applictions. i wouldnt push any more than 12psi, but some have and succeeded. i'm boosting her, then giving her the royal rebuild treatment next year so i can up the ante :D

[_CiVIC_]

cool, and i'm sure you took the necessary precautions when it came to brakes :p slotted and drilled yes?

[Mr. Focus]

not slotted and drilled no. i have upgraded the discs to DBA's tho and all my brke lines are being replaced for stronger ones, considering they're still the original ones hahahaha

i do know of a boosted civic gettin round briz with drums on the rear still

****sorry to hijack the thread****

PM me bro

[aznsiko]

wtf.. thats fast.. are you sure your car is bone stocker and no wieght reduction? because ive came past a few civic coupes with my integra.. and most of the times im infront but i dnt think i can pull that quick of a time..

[bennjamin]

guys keep the replies on topic....


KB...where is some more pix and info on ur ride ?
From what i can gather....your EJ8 , is a 80ish kw (vti coupe) ( NOT the 96kw vti engine?) with a full exhaust , CAI and stripped interior.

What tyres etc ?

[SINISTR]

Great time there Kyle... welldone! a few more mods and 14s will be comming close hey!!

Congrats mate!

[nedgeworth]

guys keep the replies on topic....


KB...where is some more pix and info on ur ride ?
From what i can gather....your EJ8 , is a 80ish kw (vti coupe) ( NOT the 96kw vti engine?) with a full exhaust , CAI and stripped interior.

What tyres etc ?


Nah the coupes are the d16y8 96kw man.

[KB]

Sorry I been Offline.

OK thanks for positive input guys :).

Stock my car is 93Kw (127Hp) According to some US Sites.



Mod List.
- K&N Pod Filter, running off a SRI style intake made of alloy.
- XForce 4-2-1 Header. (Kindly Supplied by Trav YO)
- Stock Cat
- 2.25" Crush Bent CatBack(No Resonator)
- Generic Cannon Muffler.
- D2 Coilover Suspension.

Ok my wheels are Vtir Teg (Blade) Wheels. I think they are 6 or 6.5" Wide. My tyres are like some el cheapo brand SAVA INTENSA :|.

Ben, Pics of my car is in VB Garage, can upload more though if you want. After I got my header from trav I had my car dyno'ed and it made 115WHP = 85WKw. Mind you that was with ULP. And not CAI, its a SRI.

For drag day, I put in BP Ultimate and advanced my timing. Front Tyre Pressure was 15Psi. I set my rear suspension hardest and front softest. I did some weight reduction. Rear Seat, Spare Wheel, Passenger Seat.

Trav, Send me some underground and Xforce Stickers YO!

Vtechhie, According to NRMA stock 1/4 for coupe is ment to be 17.2 Sec.

Mikey, Thanks for comments :D

-KB

[KB]

http://www.ozhonda.com/forum/vbgarage.php?do=view&id=835

[KB]

http://www.ozhonda.com/gallery/showgallery.php?mcats=all&si=&what=allfields&name=KB&when=&whenterm=

[egSi]

lazy bugger! :D

when u racing next man? u should get some semi slicks on :thumbsup:

beast:
http://www.ozhonda.com/forum/vbgarage.php?do=getimage&id=1093

sohc power y0!
http://www.ozhonda.com/forum/vbgarage.php?do=getimage&id=897

[KB]

Our motorplex doesn't open till september now :(

But at least by then might have some more goodies. :D

[type one]

that is a VERY clean engine bay.

[KB]

Cheers :D

[na]

must be because of the POCKY JDM sticker hahaha

oh on that day, an LS integra pulled 15.7 too...totally stock...with full interior...

[KB]

I cant get that ****ing thing off now!

Damn you POCKY!

[KB]

Latest Pic, 2005 VTEChnique Drag Day

http://users.tpg.com.au/1roberts/101_1336.JPG

[bennjamin]

very interesting....your numbers dont quite compute...but still the final 1/4 number dosent lie !

Mmmm....*gives bren confidence in the old d16a8 once again*

[Newcivic]

Nice Time ;D

[Weq]

great times dude

[VT3C]

very interesting....your numbers dont quite compute...but still the final 1/4 number dosent lie !

Mmmm....*gives bren confidence in the old d16a8 once again*

numbers dont quite compute ??? WTF ?? you just thought his motor was 80KW and now it doesnt compute ??

It's all about driving technique and setup.. and KB not mentioning he removed door-trims, rear parcel shelf, passenger's seat etc.. even his sun-visors (!!) hahha. power to weight ratio, a good launch, fast shifts at the right points.. and you can get fast 1/4 miles from a SOHC VTAK.. makes me want my D16Y1 back.. 15.61" with stock intake, stock exhaust and sttripped interior.

I only got 15.007" with my JDM B16A in EG5.. I was pissed off cause I had pulled 15.024" (prepped track surface) with stock intake and no short shifter etc.!!! broken front lower (passenger's side) mount not helping..

on my 1st run (against KB) when I pulled 15.007", KB was EXACTLY the same time as me at the 330' mark (6.520)after he pulled a 2.412 60' to my 2.510.

ALL HAIL GOD OF SOHC TAK KB.. BOW DOWN !!!.. DO IT NOW !! I SAID NOW !

[bennjamin]

numbers dont quite compute ??? WTF ?? you just thought his motor was 80KW and now it doesnt compute ??

It's all about driving technique and setup.. and KB not mentioning he removed door-trims, rear parcel shelf, passenger's seat etc.. even his sun-visors (!!) hahha. power to weight ratio, a good launch, fast shifts at the right points.. and you can get fast 1/4 miles from a SOHC VTAK.. makes me want my D16Y1 back.. 15.61" with stock intake, stock exhaust and sttripped interior.

I only got 15.007" with my JDM B16A in EG5.. I was pissed off cause I had pulled 15.024" (prepped track surface) with stock intake and no short shifter etc.!!! broken front lower (passenger's side) mount not helping..

on my 1st run (against KB) when I pulled 15.007", KB was EXACTLY the same time as me at the 330' mark (6.520)after he pulled a 2.412 60' to my 2.510.

ALL HAIL GOD OF SOHC TAK KB.. BOW DOWN !!!.. DO IT NOW !! I SAID NOW !

AFAIK that car does also come with another "vti" too - SOHC with 80ish kws....so its a mistake :p


anyway ! Yes nice numbers !

What rubber did u run KB ?

[egSi]

bede man, 15 flat?? u wanted 14s on steelies LOL

any pics of this outing guys?!?!

[VT3C]

AFAIK that car does also come with another "vti" too - SOHC with 80ish kws....so its a mistake :p

well yo wrong dawg.. VTi = ~96Kw CXi/GLi = ~80Kw.. haha but now you know.

Trav.. yeah man I pulled the 15.024: with stock (D16) intake, more interior, bastardised linkages and shifter, mix-matched suspension etc. on the road, the mods have made a huge difference.. but at the track.. my broken mount made the dominant side for wheelspin swap from driver's side to passenger's side.. I think my stock clutch is almost dead aslo, i was launching up to 6000RPM with next to no wheelspin - tho my tyres were down to 15psi and I think they may have been too low and actually causing rolling resistance.. who knows.. the only thing I got out of it was that I think there was a 0.2" gain as the track at DRAG-WARS when I got the previous time was surface-prepped while it was not on the weekend.

but man KB is the King of n/a D-Series !!

[VT3C]

any pics of this outing guys?!?!

some pics are on our forum and will be posted to the club website ASAP.

[KB]

Ben - The Rubber I was using was some cheap ass brand called, SAVA INTENSA. Hahahah Qualitar

[EG5]

http://img.photobucket.com/albums/v677/YonasLiu/YONASeg5.jpg

If KB d series king did 15.3 sec runs ,
What about my EG SI hatch d16a8 twin cam that ran 15.100 @ 89.17 mph , 2.1 60ft ??

[Lukezen27]

Cheers!

Getting times like this inspired me not to turbo or do a B-Series Swap. But save up for Clutch/Flywheel/Camshaft/VAFCII. I wanna break 14's in the D16.

Very nice work man and very quick for close to stock :thumbsup: :thumbsup:

Can't wait to see after the cam.............. and so on :D

GO th D's

[bennjamin]

these are all pretty nuts times :)

Another thing - what elevation is the dragstrip these numbers are set at ?
Interesting how a lil EG pulls a 2.4 60ft and a 15.3 - where as the bigger brother GSI pulled a 2.62 60 ft and a 15.6 ?( another teg thread atm) GSI backed off where the lil SOHC had its nuts revved off ?

Id also like to see your cars pull the same numbers in the summer heat :)

[EG5]

well yo wrong dawg.. VTi = ~96Kw CXi/GLi = ~80Kw.. haha but now you know.

Trav.. yeah man I pulled the 15.024: with stock (D16) intake, more interior, bastardised linkages and shifter, mix-matched suspension etc. on the road, the mods have made a huge difference.. but at the track.. my broken mount made the dominant side for wheelspin swap from driver's side to passenger's side.. I think my stock clutch is almost dead aslo, i was launching up to 6000RPM with next to no wheelspin - tho my tyres were down to 15psi and I think they may have been too low and actually causing rolling resistance.. who knows.. the only thing I got out of it was that I think there was a 0.2" gain as the track at DRAG-WARS when I got the previous time was surface-prepped while it was not on the weekend.

but man KB is the King of n/a D-Series !!

nice time u got there KB

KB is not the king of n/a d series , not untill he can beat my 15.100 d16a8 eg si hatch. my time slip attach on previous page

[egSi]

If KB d series king did 15.3 sec runs ,
What about my EG SI hatch d16a8 twin cam that ran 15.100 @ 89.17 mph , 2.1 60ft ??

the queen?

lil kiddin.

kyles time is damn good but remeber yonad DID pull a 15.1 ill race my dinosaur soon and im worried i wont beat 15.3 ****! kyle dont set the bar so high lol

im just happy to see ppl racing and racing the dseries is damn cool in my book.

well done all :thumbsup: even u bede with ur swap :p

[VT3C]

Another thing - what elevation is the dragstrip these numbers are set at ?
Interesting how a lil EG pulls a 2.4 60ft and a 15.3 - where as the bigger brother GSI pulled a 2.62 60 ft and a 15.6 ?( another teg thread atm) GSI backed off where the lil SOHC had its nuts revved off ?

Id also like to see your cars pull the same numbers in the summer heat :)

WTF ?? the only SOHC EG there was in the 17's.. and your point doesnt make any sense anyway... teg backed off ? GSi.. ?? Big brother GSi ? man I dont want to get into an argument with GSi owners, but stock GSi's are pretty slow and like i've said before with small capacity mildly modified 4cyl cars at the track, a lot of it comes down to technique and driving skill.

it sounds like you either dont beilieve KB's times or are dissin them for some reason.. you jealous ?

Not to mention it was his FIRST TIME DOWN THE QUATER EVER, KB ran 15.4's all day and topped it off with a 15.3. the air-temp was mid-to-high 20's (I got sunburnt) so go choke on that... KB was only one tenth of a second behind B16A powered CRX, an EK4 etc.

[bennjamin]

WTF ?? the only SOHC EG there was in the 17's.. and your point doesnt make any sense anyway... teg backed off ? GSi.. ?? Big brother GSi ? man I dont want to get into an argument with GSi owners, but stock GSi's are pretty slow and like i've said before with small capacity mildly modified 4cyl cars at the track, a lot of it comes down to technique and driving skill.

it sounds like you either dont beilieve KB's times or are dissin them for some reason.. you jealous ?

Not to mention it was his FIRST TIME DOWN THE QUATER EVER, KB ran 15.4's all day and topped it off with a 15.3. the air-temp was mid-to-high 20's (I got sunburnt) so go choke on that... KB was only one tenth of a second behind B16A powered CRX, an EK4 etc.


yup i am jealous - but really i cant "choke" on anything since i havent ever run my lil D series down the 1/4 either - its very interesting to learn of another car very similar to my own running good times.

I was comparing it to another " top time" posted very recently. Stock gsi's arent slow - quite a deal quicker than any stock D series engines and they are quite potent too :) BTW Bede i was questioning...and waiting for KB to fill us in.

I think its great that KB is getting these times as i am a D warrior too so stop trying to back him up bede u nancy :D j/k .

Seriously tho , Get back to showing us all some numbers and some vids KB and please can ONLY KB talk to us about his car lol :cool:

KB , what elevation is the drag strip ?

[VT3C]

Seriously tho , Get back to showing us all some numbers and some vids KB and please can ONLY KB talk to us about his car lol :cool:

KB , what elevation is the drag strip ?

JEEBUS !! get over yourself.

am answering the questions asked on behalf of KB. I helped KB with his set-up and techniques for the day and feel I am able to answer the questions.

Internet Forums are for DISCUSSION. there is no law that only one person can comment on a question.

why dont you get out from behind your keyboard and go make a pass down the quater-mile yourself instead of wasting other people's time. The title of the thread is "D-Series 400m Times" and I have posted relevant info about my own D-series experiences as well as comparing my own against KB on the day in question at the same venue.

elevation info is not provided by the Motorplex that I can find anywhere.. but from memory I think it's 120m above sea-level.

[bennjamin]

elevation info is not provided by the Motorplex that I can find anywhere.. but from memory I think it's 120m above sea-level.

thanks for the relevant input ;) - does anyone know what elevation WSID here in NSW is ? Also , Willowbank in QLD etc ?

[KB]

Good to see everyone is having a good time while ive been away. Hahahahaha
Ben, Dont know about elevation. But its near the coast on the flats if that helps.

MWAHAHAHAH EG5, how bout we just become partners in crime. Or Ill be "King of SOHC" And you can be "Lord of the D16a8". Im just happy for D Representaion.

Ill upload burnout vids and my actual run video and my timeslip tonight when I can beef hooked.

Peace yo!

[KB]

Ohh man its bad tonight! I got Honda D-Series on the brain. Hahahahah TAK!

[bennjamin]

nice nice :)

[KB]

I made the video but im a hell newbie at Editing so its like 37Meg Hahahahahaha

Ill fix it up for tommorow!

[KB]

Hey moderators.

I was wondering if maybe the timeslip database could be catorgarised? ie we could have fastest d series section?

[bennjamin]

Hey moderators.

I was wondering if maybe the timeslip database could be catorgarised? ie we could have fastest d series section?

well , i had a brief look thru - and there seems to be only 3 Dseries engined cars in there sofar....yourself , the admin and EG5. Until D series cars out guns the B series boys I think we will leave it :)

[Civic Type R]

elevation info is not provided by the Motorplex that I can find anywhere.. but from memory I think it's 120m above sea-level.
Actually its about 20m ASL.

great times Kyle. My first outing with the heavy ass EK4 was 16.2 fully laden. As soon as i stripped the biarch i ran a 14.8 with the same mods as you. It just goes to show VTEC loves to breathe.

Bede, sorry i couldnt go down to participate. My gearbox was stuffed and in need of a rebuild. However its all fine now and with a few more goodies in there im lookin for my first 13 sec pass :D

[VT3C]

Actually its about 20m ASL.

great times Kyle. My first outing with the heavy ass EK4 was 16.2 fully laden. As soon as i stripped the biarch i ran a 14.8 with the same mods as you. It just goes to show VTEC loves to breathe.

Bede, sorry i couldnt go down to participate. My gearbox was stuffed and in need of a rebuild. However its all fine now and with a few more goodies in there im lookin for my first 13 sec pass :D

20m above sea level ? hmm thought was over 100m but like I said, I cant substantiate that claim haha.

yeah KB chopped some ass big time, but was driving the USDM COUPE OF DEATH yesterday and managed to chop an EF9 with LSD **wink wink Knightrider** and that was with full interior and stereo etc. but remember KB's time is from SOHC VTEC not a B16A.. and I thought you got 14.8 with your B18X ?? but anyway....

your gearbox gone again Adam ?? far out !! that sucks big time.. any idea what's causing it ? my clutch has just gone too.. must be the cold weather HAHA

[Civic Type R]

my synchros were worn and it got to a point that i couldnt change from 3rd to 4th.
I had it all pulled out and fully rebuilt last week. We chucked a new JDM ITR flywheel in there for good measure too. It feels much smoother and better now. My only problem is now im leaving more rubber on the road between gear changes :(

My best with the B16A wa 14.8 with I/H/E.
When i dropped the B18c in i got 14.2 consistantly

[VT3C]

getting off topic here with convo but 14.8 with I/H'E is very good !!

synchros.. urghh.. i bet you sick of gearbox fun and games !! am just praying to god of vtec that MY issues are limited to my clutch.. am having trouble selecting gears and shudders on takeoff and slowing down in 2nd.. but am 90% sure is my pressure plate..

anyway.. back to D-series 1/4 mile times....

[CeeVicK]

Congratulations man! that is a pretty good time i must say... Props to you! :thumbsup:

[Civic Type R]

15.3 is damn quick for D16 in a coupe
Thats 0.2 off Yonas' time - the King of NA D16Y

Did he starve himself for the week to save on weight as well hehe?

[bennjamin]

15.3 is damn quick for D16 in a coupe
Thats 0.2 off Yonas' time - the King of NA D16Y

Did he starve himself for the week to save on weight as well hehe?

god dam havent you heard ? He has CF bones....and like removing PS or AC he has removed any uneeded organs for weight saving

*throws a kidney , gallbladder ,appendix and left nut out the window* :D

[KB]

Interestingly enough I actually had no breakfast to save weight and got 4 passes at 15.4. Then I had 2 Hotdogs and 2 Cokes and got 15.3 Hahahahaha.

Cheers Adam and everyone for nice words.

[KB]

Ben - Na CF Bones are rice. I opted for mandrel bent stainless steel. PS and AC where still in. Back to times :P

[Civic Type R]

*throws a kidney , gallbladder ,appendix and left nut out the window* :D
hahaha.
Yonas, maybe this could be your secret weapon to hit the 11's
:D

j/k mate

[fusion_VTi]

nice times mate, go the single cammer! they love the stripped interior thats for sure, makes me wanna take mine to the track!

[sivic]

we're heading down together when plex opens back up ay Kyle?
c'mon JDM ZC

[00' coupe]

Shit dude dats a good time... good work

its given one of my mates inspiration for his VTi...

[EG5]

hahaha.
Yonas, maybe this could be your secret weapon to hit the 11's
:D

j/k mate

hahahhaha :D

[Mr. Focus]

we should have some more d-series times up there soon. i have 2 from a mate in his ek civic sedan with a d16y4. first time ever on the track and in full street trim (stereo, 17's etc.) he rocked a 17.293 and his 2nd run dropped a 17.085. he was hoping for 16's, but there will be next time

[SINISTR]

I have 'hopes' to pull 14s in my CRX... but have to see how we go :)

[egSi]

I have 'hopes' to pull 14s in my CRX... but have to see how we go :)

BAD ASS!!

[92DELSOL]

took my absolutely dead stock eg5 si to willowbank wednesday night and ran a 16.204 on my first run. was very happy with this time!! didnt have a great start and was carrying a bit of extra weight too. gonna semi strip interior next time and go for a 15!!!

[waymad]

hey can i post up my time if i have apexi rsm meter in my car cause i have the d15b single cam vtec jdm engine 1.5 litre makes 130hp

[dc4t]

rsm's a bit inaccurate as u know coz u'll always get a better time due to wheelspin.. but i say post it anyway if u mention its done on an rsm

[WANKFACTR]

nice times kb. but does that mean my time of 16.9 with full interior and sub good as i only have a ek1 with a d16y4 (sohc non-vtak) with only cat back and pod filter a good time. cause i was really disapointed in my time so i pulled motor apart and well i hoping for a 14flat when i get back to the motorplex.
but congrats on the consitency.

[dc4t]

lol 14 flat out of sohc 1.6 non vtec? r u serious... wat mods?

[waymad]

he the apexi rsm meter says in the maunal that it takes in account the wheel spin and does not add it it uses the g sensor to see if the car is moving anway iam just waiting for my car to run low on fuel which should be tonight than ill take it out but i will be doing the run on 17 inch chrome wheels as i dont have stockies yet but will get them

[WANKFACTR]

my mods will be

low compression pistons
forged rods
turbo
370cc injectors
rb25det fuel pump
ems stinger
fmic
NOS adjustable fuel pressure regulator
port and polish head
turbo style cam
new bearings
pod filter
3inch exhaust
greddy type s bov or gfb stealth fx bov
excedy clutch
lightweight flywheel

[KB]

Wank factor are you Robert?

Sivic - Yes going back down after new cam goes in and clutch

[WANKFACTR]

yes kb i am Robert

[waymad]

last night i did a couple of runs the best i could do was 16.3 my engine is standerd besides a air filter high flow cat and exhast box only i also had 17inch chromies on and only had unleaded fuel in my car, my car weights about 920kg with me as well is that time any good also i think it could of got little better times if i stockies on and 98 fuel maybe 16s

[krasyvy]

16.3 with a fairly stock setup and 17's without weight reduction is pretty good

it's got the potential of 15's without any heavy mod's.

u ran without spare tyre right?

[waymad]

thats right no spare

[mav]

Hey Guys Im new to this forum though i would post some info about my night at eastern creek. Ive got a 96 civic coupe stock with and air filter i ran with full tyre pressure full tank and stereo in the boot I got a 16.6 with a slippin cluch.
Heres a photo of the night
http://img465.imageshack.us/img465/8616/wsidstreetmeet0510050925ey.jpg (http://imageshack.us)

[oopsiy]

i got a ef 4 door. d15b ... twin carbies. pretty stock just cat back with cannon. and pod filter. ran 16.7 @ 79mph ...

[integrity]

hey EG5 so your car is a DOHC Non Vtec 1.6 yeah?, may i ask which engine is better on the EG?.. the DOHC 1.6 or the SOHC VTEC?

[Lukezen27]

hey EG5 so your car is a DOHC Non Vtec 1.6 yeah?, may i ask which engine is better on the EG?.. the DOHC 1.6 or the SOHC VTEC?

lol hes got a K20A in da EG matie :p

EG...................... not quite

[Surrufus]

good on ya KB
hey bede when's the next vtechnique drag day?
lol ill com and lay a pass then
mite put the zex in if i dun sell it

[sivic]

lol hes got a K20A in da EG matie :p

EG...................... not quite
his EG has/had the D16A8 in it (DOHC non VTEC) .
the K20 EG is Zi's. Yonas drives it at the track

[Lukezen27]

his EG has/had the D16A8 in it (DOHC non VTEC) .
the K20 EG is Zi's. Yonas drives it at the track

Thats not what's in EG5 vBGarage :rolleyes:

http://www.ozhonda.com/forum/vbgarage.php?do=view&id=53 K20

Your thinking of egSI????

http://www.ozhonda.com/forum/vbgarage.php?do=view&id=1455 D16A8

[sivic]

no. perhaps EG5 will confirm?

[Chi]

15.3 is damn quick for D16 in a coupe
Thats 0.2 off Yonas' time - the King of NA D16Y

Did he starve himself for the week to save on weight as well hehe?

Yonas has d16a

[egads]

his EG has/had the D16A8 in it (DOHC non VTEC) .
the K20 EG is Zi's. Yonas drives it at the track

:thumbsup:

[bored]

that's pretty good

[RMN15N]

shiet.. boys.. makes me wanna keep my lil d maybe i will?

[EG5]

15.1@90mph
2.1 60ft
thats as fast as i could go on d16a8 EG hatch.

[RMN15N]

thats with cold air intake extrators or headders and muffler?

[EG5]

thats with cold air intake extrators or headders and muffler?

and unichip , heavy duty clutch , lighten flywheel.
it had 75kw@wheel

I gave up to D series last year.

[RMN15N]

what do you mean by you gave up to d series..?
how much was the uni chip?
i am thinking of doing a conversion to DOHC vtec.. but if this lil d
is worth it i might keep it and plus its a ZC not many of them around

[intacivic16v]

Man that makes me want to get my old car back. I had a 1986 si civic (same shape as the 1984's) it had the old 1986 integra zc twin cam engine, the best time i got was a 15.9 (no mods) if i had of known that the d16a's had that much potential i would have kept it..

[EG5[KRT]]

and unichip , heavy duty clutch , lighten flywheel.
it had 75kw@wheel

I gave up to D series last year.

what kind of torque figures did u get ?? coz my car has 81kw atw with d16y1 but i dont think the torque figures are very good

wat kind of tyres were u using to get a 15 sec quarter ???? semi slicks ??

[EG5]

i have to hunt for the old dyno sheets.
i used DOT street legal tyres.

[Zemi]

88´ CRX D16A9 (16V DOHC nonVTEC) with some mods...

14,727 / 148,629km/h

60ft dunno. :(

vid of launch - http://www.mkiv.cz/_video/mimon2006_zemi.mpg

[Balistik Motorsports Int]

high 14's to mid 15's

[blk_shadow]

has anyone done 1/4 mile in sohc non vtec (d16y4) with mild mods?

curious about the time.

[Lukezen27]

has anyone done 1/4 mile in sohc non vtec (d16y4) with mild mods?

curious about the time.

Me to :)

[Sexc86]

i have herd a few people do mid to low 16s, with I/H/E in Ek Hatchs with stripped int and d16y4, not bad IMO

[turtleEK1]

years ago when i last went out to willowbank i pulled a mid 16 sec in my EK1 sedan (d16y4)... that was with shit tyres (stock 14s), pod, cheapo crush bent exhaust and just back seat taken out...

it would a better time now with some more gear done to it... i should do a run out there one night...

but alignment isn't exactly set up for it... camber = reduced traction on straight!

[crazyEG]

My eg Si
iran a 15.8.... 2.199 60ft
stock with 300,000 + kms on the dial
no back seats.....

[hyrpm]

88´ CRX D16A9 (16V DOHC nonVTEC) with some mods...

14,727 / 148,629km/h

60ft dunno. :(

vid of launch - http://www.mkiv.cz/_video/mimon2006_zemi.mpg
what mods u got

[crazyEG]

engine is stock as a rock.....its got some crappy pod style filter that came wit the car...
thats all in d engine bay
atm

[Zemi]

what mods u got

port/polish, 4-1, catless, Fuel press regulator, lightened flywheel, 3,88 to 4,25 FD, TB 61mm... But engine is sold... I´m going B series. :wave:

[Frankie]

ay guys went last night to the creek i pulled 16830 60ft 2.580 mods only are intake first time to the track i reakon i can go better

[pete12]

ay guys went last night to the creek i pulled 16830 60ft 2.580 mods only are intake first time to the track i reakon i can go better

bullshit

[Frankie]

bullshit

you being sarcastic or serious

[pete12]

datz pretty good man wat do d16y8 do stock quarter mile, coz i got one

[Frankie]

datz pretty good man wat do d16y8 do stock quarter mile, coz i got one

quicker maybe low 16 high 15, drag is way dif to street got to take off shift everything perfect

if u dont believe me i got that time i can show ya timesheet if you want

[rayb3na_]

well done frankie =] see what your potential is with your d16y8! gut it out and see if your times improve =] hope to see you down there next time

[Frankie]

yeh i got a d16Y4 lol

[Gio]

lol d16y1 thrashing hahaha nice.

Also read from the start of this thread, its so noob lol!!!

[Frankie]

yeh i could of thrashed it a bit better lol. next time.. Ay wat did other guys get in there D16Y4
cheers

[Gio]

i Couldnt be ****ed thrashing my piece down the runway, you have to pay lol fk that.

[Frankie]

50 dollars not like its 200 hundred. its fun and addictive lol lucky i cant go busy every night lol

[Gio]

50 bucks for how many runs?

[Lukezen27]

50 bucks for how many runs?

As many as you can get in :o

Its mad fun bro

[Frankie]

normally 3 but if it u get there ealry than u can maybe get a few more runs in

[rayb3na_]

yeh i got a d16Y1 lol

you have a d16y1? thats my motor dude im pretty sure yours is an 8 or a 4 since 1 didnt come factory in the ek unlss u swapped in an older engine?

[Frankie]

you have a d16y1? thats my motor dude im pretty sure yours is an 8 or a 4 since 1 didnt come factory in the ek unlss u swapped in an older engine?

shit i Mean D16Y4 my bad

[tjsauce]

wat can i do with 2500 i have an eg with a d16a8 turbo?

[Lukezen27]

wat can i do with 2500 i have an eg with a d16a8 turbo?

I could only get 14.5 with my D16Y1 Turbo at 137kw at the wheels

[Gio]

Whys that man i thought u would be in the 13's??

Did u have weight reduction?

What was the problem?

[Lukezen27]

Whys that man i thought u would be in the 13's??

Did u have weight reduction?

What was the problem?

No

Crap power band with a turboed Honda

My top end speed is good 99mile but just can't get the power up fast enouigh

[Gio]

faster spooling turbo?

[Lukezen27]

faster spooling turbo?

Yes

thaat would help

BB would have helped a lot

[Gio]

haha what happened to the car i see it says R.I.P

[Lukezen27]

haha what happened to the car i see it says R.I.P

Con rod through the block

[Gio]

And why did that happen?

[Lukezen27]

And why did that happen?

Vac line came off the EBC and she overboosted till pop

[hotcivic09]

any possible mods for this engine. Got catback and magnaflow cat and air intake at the moment

[Gio]

Dude don't know if you know but that shiz is vtec-e, it's the 'economical' vtec, basically it's slower than everything. Dont mod it.

[d15z1SUX]

not as bad as d15z1? i will never touch my engine...

[Gio]

lol man u have the 'older' vtec-e i think :)

Yours would be worse lol, 1.5L his is 1.6L, prob very similar though.

[EK1.6LCIV]

anyone want to come to QR with me on a Wed nyte with their D-series for shits and gigz?

[Frankie]

Went to the creek a while ago forgot to put my time up in this thread
managed to get 16.086 I/H/E no stripped interior
its my bp at the moment

[canadian]

Reviving old thread here....anyone taken an EH9 sedan with the D16A8 down the track?? I just picked one up, it seems quicker than the si hatch I had before!

[dougie_504]

EH9 is the VTi lol.

I think they're pretty much the same weight, or negligible difference mate. Unless your new A8 is compressing a lot better then I doubt there's much in it.