Intake Manifold Install - DC2

[HRV-80Y]

dis wat i need help on installing intake manifold in a dc2

[wynode]

Installing the stock dc2 variable runner manifold?

If you're taking yours off pascoe......its just the reverse LOL

[HRV-80Y]

installing after aftermarket intake...

jus need details on how and what not to do...etc. jus 2 b safe...im a technical noob

[wynode]

I haven't done it but it shouldn't be too hard to do....maybe do us a DIY article if you do it!

What manifold are you getting?

[HRV-80Y]

I haven't done it but it shouldn't be too hard to do....maybe do us a DIY article if you do it!

What manifold are you getting?

apparently its a 3-4 hour job...

wyn do u mean wat manifold am im putn in ? :p :p :p wuldnt u luv 2 kno !

[EGB16A]

i heard its a few hour job if you know what you are doing, also you should get the torque setting for the bolts. I heard if its not tight enough, things go wrong, and if its to tight.. things go wrong.

i read it somehwere on honda-tech.com

[Chi]

Pas wait another week.

Once my CF piping comes in ill do the install with you.

Getting a mate to help with it.

[HRV-80Y]

Pas wait another week.

Once my CF piping comes in ill do the install with you.

Getting a mate to help with it.

i'm finkn of getn it put in this week...

charlie 4 said wont help me til a few weeks his busy ahah...

so ill see...

[Boost]

u want to torque it up right, u also need to replace all seals, cause once u remove the I.M it wont be a tight one anymore. U have to know how to remove injectors as well. The seals there may be reusable. But I reckon u get new ones. Im not sure if Charlie will use the old ones or new ones. There are also instant sealants, similar to locktite but not. If you know what your doing then yeh around 3 hrs.. if not.. it will take longer and you might end up screwing it up instead.

[jdmlvn]

charlie is alwayz busy