The Honda Jazz Technical Picture Tread

[strepto]

Hi!

The goal of this tread is to include pictures of engine, suspension, exhaust and other technical illustrations and/or pictures. In time I will try to make a collection and write up some summaries, with diffrences between the various models, parts that are swappable, and hopefully be able to make HOWTO's for the users of this board.

Help me to help you!

If possible, try to have the pictures taken with good light, and high resolution. I want the pictures to be as neutral as possible, so that they may be exploded and enhanced to better show the specifics. If you don't have a place to host up the pictures, I can host them for you. If so - just mail them to me - but please include what car, year, model, etc you have.

This is what I want pics of:

Suspension (Dampeners, Springs, Controll Arms, etc)
Exhaust Systems (Mounts, OEM, Aftermarket)
Bodyparts (Front, Rear, Lips, Kits)
Engine and Drivetrain (Enginebay Pics, Mods, Intakes etc)


In time, I hope this will help others find tech info to help them choose parts for their car, do easy mods and maybe come up with new ones.

When I get my GD1 I will start to take some pictures and hopefully some measurements to go with it.

"Will my VTi suspension fit on a 2000 1.3A?"
"Can I use that exhaust syetem for my car?"
"What mods are needed to ....?"
"How do I remove the .....?"

These are the kinds of questions I hope to be able to provide the answers too, and if we succeed, this post, this board, may be a reference point for Jazz information for the rest of the world! Imagine that!!

... but only if you guys think its worth the effort, and find it interesting :)

[ahcash]

Dude.. what do we do without you... your effort is much appreciated.

Came across this one from one of the thread which I think is worth while putting here...

http://www.cyberstork.com/cgi-bin/howto.cgi?page=1&sel=img&imgtp=fit

[Zimp13]

Dude.. what do we do without you... your effort is much appreciated.

Came across this one from one of the thread which I think is worth while putting here...

http://www.cyberstork.com/cgi-bin/howto.cgi?page=1&sel=img&imgtp=fit

wei cash... so much 'blow water' ar .. heheh

[ahcash]

wei cash... so much 'blow water' ar .. heheh

What blow water?? Blow your friggin @$$... :D

Very technical mah ... how to remove the dashboard.. :thumbsup:

[strepto]

Thanks! Thats exactly what Im looking for! I'll keep looking for more too!

[strepto]

Keep en coming guys!

[terris08]

Can someone share their experience of how to install a front strut bar on a Jazz??
Because it seems to me that there aren't a lot of room for it to be fitted properly....

[spoon fit]

Can someone share their experience of how to install a front strut bar on a Jazz??
Because it seems to me that there aren't a lot of room for it to be fitted properly....

ask danny..
he done it on at least 5 jazz

[asiansquad]

Takes about half an hour to install the front strut bar

[spoon fit]

already?

[strepto]

I need PICS !!! Please guys, take 5 minutes and snap a little pics of your engine bays, your exhaust systems, and your suspensions! :)

[wynode]

Nice work Tord. If you gusy want to host images.....just use the Ozhonda Gallery (http://www.ozhonda.com/gallery/index.php)

[Zimp13]

I need PICS !!! Please guys, take 5 minutes and snap a little pics of your engine bays, your exhaust systems, and your suspensions! :)

when i change to coilover... i ll take the pics....... for the engine bay, this is mine.....

http://img210.imageshack.us/img210/4365/jazz0027c6xt.jpg (http://www.imageshack.us)

[TypeG]

engine bay
http://img322.imageshack.us/img322/7149/dsc003102st.jpg

[TypeG]

rear suspension

http://img313.imageshack.us/img313/4306/dsc002356ir.jpg

[TypeG]

bpipe

http://img335.imageshack.us/img335/1493/dsc002557ht.jpg

[asiansquad]

Exhaust

http://i7.photobucket.com/albums/y257/asiansquad/DSC00063.jpg

[strepto]

Thanks a bunch guys! these are really nice pictuers! if you could mail them to me too thatd be great, cos I cant grab them off the site youre hosting from.

[terris08]

Is your strut bar the Cusco one?



when i change to coilover... i ll take the pics....... for the engine bay, this is mine.....

http://img210.imageshack.us/img210/4365/jazz0027c6xt.jpg (http://www.imageshack.us/)

[asiansquad]

Is your strut bar the Cusco one?
It's xforce

[ahcash]

Thanks a bunch guys! these are really nice pictuers! if you could mail them to me too thatd be great, cos I cant grab them off the site youre hosting from.

strepto.. I am pretty sure you can right click on the picture and save as ?? works for me....

[Zimp13]

bpipe

http://img335.imageshack.us/img335/1493/dsc002557ht.jpg

Yeah.. Xforce bpipe... heheheh .... :D

[TypeG]

or u can see many pictures under my signiture
LOL

[spoon fit]

and my airbox...
i post the pic tomolo

[muli]

zimp whats that pod filter of yours?


strepto, pics of my intake setup @ http://www.ozhonda.com/forum/vbgarage.php?do=view&id=1288

[Zimp13]

zimp whats that pod filter of yours?


strepto, pics of my intake setup @ http://www.ozhonda.com/forum/vbgarage.php?do=view&id=1288

the one in the pic is a K&N Muli....

[muli]

is that custom pipe work?

[Zimp13]

is that custom pipe work?

yes that is but i ve changed the setup now... that was the old one... i feel that the new one is better.... i did all these myself

[muli]

yes that is but i ve changed the setup now... that was the old one... i feel that the new one is better.... i did all these myself

what material is it? looks like pvc pipe spray painted silver

[papaya]

and my airbox...
i post the pic tomolo

pictures please ...

[MR Spyder]

Here's my contribution.. :)
Engine Bay w/APEXi Open Pod set-up;
http://www.imagestation.com/picture/sraid171/p396f655c041ffaf0d87f538ef5d15513/f3e43c9e.jpg

Engine Bay w/stock airbox set-up;
http://www.imagestation.com/picture/sraid177/pa5f4251149a0195bc4886e65237ee1db/f33b097e.jpg

Brake Stopper;
http://www.imagestation.com/picture/sraid177/pe5ffe1c18f37e7d29c5b62f4204ee81c/f33b0983.jpg

Have reverted back to stock airbox setup..
Stuff I have in my car:
1. Strut Bar
2. Fuel Magnets
3. Brake Stopper
4. Vacum Tank
5. Cold Air Intake
6. Air Injector
:)

[STTICH]

pics not showing MR_Spyder ..

:)

[MR Spyder]

Noted! Updated accordingly.. :)

[Zimp13]

what material is it? looks like pvc pipe spray painted silver

hahaha.... it is...... :D poor man mar.....

[spoon fit]

pics not showing MR_Spyder ..

;)

[STTICH]

My little engine bay :)


http://img71.imageshack.us/img71/2853/a8nn.jpg

[asiansquad]

ur engine bay looks clean :thumbsup:

[ahcash]

http://board.hondasociety.com/images/paulie/smilies/bowdown.gif http://board.hondasociety.com/images/paulie/smilies/bowdown.gif http://board.hondasociety.com/images/paulie/smilies/bowdown.gif http://board.hondasociety.com/images/paulie/smilies/bowdown.gif http://board.hondasociety.com/images/paulie/smilies/bowdown.gif http://board.hondasociety.com/images/paulie/smilies/bowdown.gif

Clean Engine bay.. you have any heat shield around the POD Filter?

[ahcash]

2004 stock engine bay ...
http://img150.imageshack.us/img150/3118/jazz2004resize2jq.jpg


2005 stock engine bay ...
http://img57.imageshack.us/img57/5403/jazz2005resize4ic.jpg

[asiansquad]

apart from the airbox...they look the same

[strepto]

Hey guys!

First of all, thank you so much for all your contributions! I will start incorporating these pics in new treads soon - and hopefully be able to make some good stuff out of it :) Keep em coming!

[spoon fit]

STTICH, how much for the cf cover

[MR Spyder]

Here's my contribution.. :)
Engine Bay w/APEXi Open Pod set-up;
http://www.imagestation.com/picture/sraid171/p396f655c041ffaf0d87f538ef5d15513/f3e43c9e.jpg

Engine Bay w/stock airbox set-up;
http://www.imagestation.com/picture/sraid177/pa5f4251149a0195bc4886e65237ee1db/f33b097e.jpg

Brake Stopper;
http://www.imagestation.com/picture/sraid177/pe5ffe1c18f37e7d29c5b62f4204ee81c/f33b0983.jpg

Have reverted back to stock airbox setup..
Stuff I have in my car:
1. Strut Bar
2. Fuel Magnets
3. Brake Stopper
4. Vacum Tank
5. Cold Air Intake
6. Air Injector
:)

[spoon fit]

pics not showing MR_Spyder ..

:cool:

use http://imageshack.us/index.php

[MR Spyder]

Spoon Fit, same problem in here.. Can help me to host the pics? Followed the instructions, but can see the photos @ my side.. Thanks!

[spoon fit]

kong_joo_732000n@yahoo.com.au pls

[MR Spyder]

U have mail!

[spoon fit]

sorry! kong_joo_732000@yahoo.com.au

[MR Spyder]

aiyoh.. ok.. check your mail, dude!

[spoon fit]

Here is MR Spyder's jazz
Engine Bay w/APEXi Open Pod set-up;
http://img150.imageshack.us/img150/1986/0012ks.png


Engine Bay w/stock airbox set-up;
http://img150.imageshack.us/img150/1722/0066ft.png


Brake Stopper;
http://img150.imageshack.us/img150/2668/0022bu.png

[spoon fit]

what brand of ur brake stopper?

[STTICH]

thanks thanks to asiansquad and ahcash :)

and no..i dont hav any heat shield around the pod.. anyone know where to find one? :o



STTICH, how much for the cf cover

a friend got it for me awhile back in hk.. ~AUD120 at the time.

[spoon fit]

no..i dont hav any heat shield around the pod.. anyone know where to find one? :o






DIY?

[ahcash]

thanks thanks to asiansquad and ahcash :)

and no..i dont hav any heat shield around the pod.. anyone know where to find one? :o



Looks like MR Spyder's got it.. He is from Singapore though.. In Australia, we got nothing .. hahaha!!!

http://img150.imageshack.us/img150/1986/0012ks.png

[spoon fit]

found it on jap site
DIY master brake cylinder for honda jazz/fit
http://atypethefit.fc2web.com/img177.jpg
http://atypethefit.fc2web.com/img178.jpg
http://atypethefit.fc2web.com/img179.jpg
http://atypethefit.fc2web.com/img180.jpg
http://atypethefit.fc2web.com/img181.jpg
http://atypethefit.fc2web.com/img182.jpg
http://atypethefit.fc2web.com/img183.jpg

danny, teach us~

[Zimp13]

i dun think thats strong enuf sunny.... we can try other ways....

[spoon fit]

not stong enough???

[Zimp13]

i mean the design that u post

[spoon fit]

ok, u mean too thin?

[crankshaft]

I guess i should have taken pictures when i painted my headlight housing. Sorry guys, I'll take pictures next time

[MR Spyder]

Looks like MR Spyder's got it.. He is from Singapore though.. In Australia, we got nothing .. hahaha!!!

http://img150.imageshack.us/img150/1986/0012ks.png

Yup.. I DIY-ed my heatshield, with a heat insulating material, thats abt 1/2 inch thick! I got it from those shops selling "ARMAFLEX".. Its a foam material, actually. Took me abt 30 mins to set up the heat shield! :)

If I'm in Australia, I won't helping you guys to do it.. Hee.. So sorry, I'm @ Singapore now. :p

Anyway, its pretty easy!!

[strepto]

Whats the deal with the brakestopper? To retrofit a diffrent brakebooster or something?

[MR Spyder]

Whats the deal with the brakestopper? To retrofit a diffrent brakebooster or something?

By using the Brake Cylinder Stopper, the unwanted flex of the brake master cylinder is prevented when the brakes are applied. Thus makes the Brake pedal touch stiffer and braking operation more controllable.

I've no regrets ever since I installed this brake stopper! :) Braking definitely feels much more better, without the 'spongy' feeling anymore!

Interested?

[spoon fit]

what brand of ur Brake Cylinder Stopper

[MR Spyder]

No brand. :) What matters most, is that it works!

[spoon fit]

custom made? how much?

[MR Spyder]

custom made? how much?
You've got PM.. :)