POD Fitting

[jdmh22a]

Hey all,

I've got a 93 prelude and im planning to fit in a POD, the drama is that it won't fit onto the stock intake pipe..can i get an adapter to fit it into the stock intake out to a 3inch for the POD or do i need to get the whole intake system?


Cheers

[kOncept]

firstly what pod is it? i know with the hks mushrooms and the a'pexi power intake offer a range of adapter sizes that bolt on to the back of them... Not too sure what the prelude intake pipe looks like tho

[jdmh22a]

it's a K&N filter.

[chaos coupe]

why don't u jst connect a 3" stainless steel pipe at the end of the intake system? that should work. i got the pipe if u want it im in the west..

[redliner]

y not just get the whole piping and save alot of trouble... there a few pipe on ebay going for like $70

[he-tec]

my mate installed my k&n pod filter, he just sawed off the airbox, squeezed the pod in and used clamps from the servo. hose clamps should do the job. it was a 94 jdm prelude.

[Mike_]

nice and dodgy :)

[he-tec]

did the job, nothing went wrong after the install, d.i.y. mate

call it what you want:thumbsup:

[jdmlvn]

i suggest you get a k&n pod with a fixed i2 CAI

[chan]

r u after a MAF?

http://www.simota.com.au/HTML/HTML%20Image%20Pages/Adapters/Adapters_pic05.htm

[jdmh22a]

Thanks guys/girls for you help i just bought the whole intake system with a K&N pod filter..saves me the hassle of DIY :D anyway yeah you guys were right about the POD dang engine response is awesome and VTEC has never sounded better :D

[buneyha]

my bought my car with the pod pushed onto a sawed off stock pipe.
At first I thought the pod would be better then stock airbox.
but having it there I found that, it was sucking not enough air same time it's hot,
the power of the car dramastically changed,
it started drinking more fuel.


my mate installed my k&n pod filter, he just sawed off the airbox, squeezed the pod in and used clamps from the servo. hose clamps should do the job. it was a 94 jdm prelude.

[jdmh22a]

what kind of pod are you using?

[buneyha]

I'm using a K&n

[dundas]

just give it a cold air feed
nothing wrong with the simota or the ebay piping.. if ur worried about heat absorption... just - spray it with the high temp spray which u use on ur brakes...
- wrap that thing up with sum thermo wrap (good stuff)
- leave it stock n use a panel filter n have a cold air feed to it.

[jdmh22a]

Can you give me links or pictures where i can DIY Cold air intake for the 93 prelude, i know there is an airduct that is located underneath the stock airbox, but the way to run the pipe i have no idea..thanks