PDA

View Full Version : list of seats that are a straight bolt on to the EG



timmya2
12-07-2005, 08:07 PM
post some of the seats that fit straight onto the EG without any modification to the rails.

i heard that integra seats are a straight fit?

thanx guys

EG5[KRT]
12-07-2005, 09:34 PM
if you have the rails for eg .. any seat pretty much... like bucket wise neways

i.e. recaro, sparco, bride etc etc

timmya2
12-07-2005, 09:46 PM
i mean like stocko honda seats not buckets.

A_TRAK
12-07-2005, 11:31 PM
i recently put crx del sol seats into my eg...its pretty much a straight bolt on to the orig rails...much better than the eg seats!!!

hope that helps

EG5
12-07-2005, 11:50 PM
dc2r seat , dc2 vtir seat will be a bolt on too.

timmya2
13-07-2005, 12:05 AM
sweet keep em comin

gambate
13-07-2005, 02:49 AM
i am sure DC2R rail wont fit EG

EG5
13-07-2005, 09:17 AM
i am sure DC2R rail wont fit EG

:confused:
I've installed alot of dc2r recaro's to EG , and its a straight bolt on.

timmya2
13-07-2005, 12:28 PM
hmm interesting

EGB16A
13-07-2005, 02:07 PM
prelude seats in mine, which are very firm for factory seats

egSi
13-07-2005, 02:15 PM
jdm eg6 sir seats r sweet, they bolt in easy :thumbsup:

gambate
13-07-2005, 02:29 PM
http://www.ozhonda.com/gallery/showphoto.php?photo=2815http://www.ozhonda.com/gallery/showphoto.php?photo=2815http://www.ozhonda.com/gallery/showphoto.php?photo=2815&sort=1&size=medium&cat=500http://www.ozhonda.com/gallery/watermark.php?file=500/1323DSC00549.JPG
is this a DC2R rail?
i bought it, and it wont fit unless i bend it from /------- to become /------\ looking at side way. this is for the door side of the driver rail..:confused:

Lukezen27
27-07-2005, 08:45 PM
Are JAZZ and EG reails interchangeble?

ICV 73C
14-10-2005, 10:17 PM
question. so is it the same with eg sedans (eh9) ? example dc2 recaro's rails, bolt onto a civic sedan ? curious question.

lenz
15-10-2005, 02:27 AM
how about dc2 vtir seats into a ek seadan? i got the seats but didnt look foward to put them in yet

autorichtech.com
15-10-2005, 08:58 PM
dc2r with fit directly on eg what EG5 said.

lenz: dc's differ from the ek...heard it was slighty different

nedgeworth
01-11-2005, 09:26 AM
little bit from the dead but when you say direct bolt on is this meaning with the seat rails? Or are you saying the deat will slide onto the rails already in the car.

barefootbonzai
01-11-2005, 11:48 AM
If it doesn't bolt straight into your eg, you got ripped off mate. Like EG5 said, it's direct bolt in. Have done it 3 times myself and it fits perfectly.



http://www.ozhonda.com/gallery/showphoto.php?photo=2815http://www.ozhonda.com/gallery/showphoto.php?photo=2815http://www.ozhonda.com/gallery/showphoto.php?photo=2815&sort=1&size=medium&cat=500http://www.ozhonda.com/gallery/watermark.php?file=500/1323DSC00549.JPG
is this a DC2R rail?
i bought it, and it wont fit unless i bend it from /------- to become /------\ looking at side way. this is for the door side of the driver rail..:confused:

barefootbonzai
01-11-2005, 11:51 AM
dc2r with fit directly on eg what EG5 said.

lenz: dc's differ from the ek...heard it was slighty different

Yeah just a tiny bit different, 3 out of the 4 holes line up. The flat one on the EK is slightly longer, but i'm pretty sure you can use your EK rails and put them on the DC seats.

KB
01-11-2005, 11:56 AM
Anything with a DC or EG Chassis are interchangable with each other. Like wise, anything with EK, EJ or EM chassis are interchangeable.

ICV 73C
01-11-2005, 02:25 PM
sorry to ask again, but no1 seems to replies the question, but i was wondering if dc2 rails (recaro's) will fit in an EH9 civic sedan. thanks

CTR Coupe
01-11-2005, 02:53 PM
http://www.ozhonda.com/gallery/showphoto.php?photo=2815http://www.ozhonda.com/gallery/showphoto.php?photo=2815http://www.ozhonda.com/gallery/showphoto.php?photo=2815&sort=1&size=medium&cat=500http://www.ozhonda.com/gallery/watermark.php?file=500/1323DSC00549.JPG
is this a DC2R rail?
i bought it, and it wont fit unless i bend it from /------- to become /------\ looking at side way. this is for the door side of the driver rail..:confused:

did they come off factory recaros? they might be EK9 seats not DC2R

barefootbonzai
01-11-2005, 04:12 PM
sorry to ask again, but no1 seems to replies the question, but i was wondering if dc2 rails (recaro's) will fit in an EH9 civic sedan. thanks

YES


Edit... I just read the tread again and it was answered like 3 or 4 times

ICV 73C
01-11-2005, 04:41 PM
sorry about that, i neva saw that reply thats y the question reapeared. sorry again

Civic Type R
01-11-2005, 04:46 PM
Much to my surprise at the time, I bolted in a Civic Type R Recaro EK rail into an EG with no hassles.