xforce handling kit

[asiansquad]

Just got all the struts installed today :D

Tried doing some cornering and the handling is 100% better than before. :thumbsup::thumbsup::thumbsup:

For $350.00 it is a real bargain. Thanks danny (a.k.a zimp13).

I would recommend this to anyone, it is well worth it.

[spoon fit]

$350 for how many?

[asiansquad]

$350 for how many?
5

[panda]

so what does the handling kit comprise of? pics please :D

[asiansquad]

will try and take some pics

[Zimp13]

These in my car.... :D

[asiansquad]

mine is the same

[crazyray]

can confirm that this does handle very well!

was in the car at the time of testing!

Bloody crazy ass driver :D

[strepto]

THis will be a nice addon to my goal for making my Jazz handle like a go-kart. The only thing I wish we had, was a front frame-brace.

[spoon fit]

can confirm that this does handle very well!

was in the car at the time of testing!

Bloody crazy ass driver :D


yes, Bloody crazy ass driver :D

[fitme]

you said 5 pieces...where are the other 2?

[spoon fit]

front low arm and # bar

[vividjazz]

Any squeeks, rattles or creaks once installed?

[newmski]

Any squeeks, rattles or creaks once installed?
lol only if he didn't tighten the struts ?:confused:

[Zimp13]

you said 5 pieces...where are the other 2?

the other 2 are Lower Arm Bar and H Bar.... cant take pics cos no hoist....
but the looks exactly the same the Summit one but only in blue color.....

[Zimp13]

Any squeeks, rattles or creaks once installed?

No....

[Zimp13]

Also now got the 6th strut for jazz... from xforce as well.... pic below shows where it would fit...


Once all these struts are in.... shit ur jazz handles so MUCH MUCH better!!!!!!!!!! :thumbsup: :D

[spoon fit]

how much pls

bolt on or need modify

[VTi_b0i]

can i get this kit for a 94 Civic VTi Sedan? cause my car is in some great need for better handling... wats the kit do for top end handling?

[Zimp13]

how much pls

bolt on or need modify

the room bar??? bolt on.... all struts comes in 6 now.... dun sell separately....

[spoon fit]

the room bar??? bolt on.... all struts comes in 6 now.... dun sell separately....

bolt on!? how? no need to screw a hole?

[Zimp13]

bolt on!? how? no need to screw a hole?

no need lar... thats bolted on the upper seat belt mount..... another way is just drill your ass a bigger hole man...... gagagagagaga :D

[spoon fit]

no need lar... thats bolted on the upper seat belt mount..... another way is just drill your ass a bigger hole man...... gagagagagaga :D

http://img319.imageshack.us/img319/5501/hand017dz.gif

[D16Y]

any idea where i can get the kit in syd?

[Fizz]

why only sold in set of 6? cant i just buy whichever pieces i want? :( coz i dont like the room bar and the rear strut bar. pls PM me individual prices if possible...thanx :cool:

[TypeG]

it look similar but never look exactly the same as SUMMIT. Also it weight heavier plus the thickness are different as well

[spoon fit]

summit dun have this bar
http://img330.imageshack.us/img330/5392/roomtopbar016pn.jpg

[Zimp13]

it look similar but never look exactly the same as SUMMIT. Also it weight heavier plus the thickness are different as well

exactly the same as in general look lar..... we weighed together at my place before and u urself said not much difference.... now u say different thing???

[spoon fit]

why only sold in set of 6? cant i just buy whichever pieces i want? :( coz i dont like the room bar and the rear strut bar. pls PM me individual prices if possible...thanx :cool:

yap, i want to know how much for the "room bar"? pls

[bagaichiban]

i want them as bad as my saving account~lol~:P

i will start taking extra shift from my part time job now~heheh~

[spoon fit]

haha....u got spoon front tower bar already, right?

[bagaichiban]

haha....u got spoon front tower bar already, right?


Yes la~just front tower bar along already made obvious difference, so i could image how MUCH difference all those together gonna make la~:rolleyes:

[TypeG]

exactly the same as in general look lar..... we weighed together at my place before and u urself said not much difference.... now u say different thing???
the look not EXACTLY the same
and not weight EXACTLY the same
i say not much different coz u just buy it and i dun want to piss u off ma
hahaha

[TypeG]

Yes la~just front tower bar along already made obvious difference, so i could image how MUCH difference all those together gonna make la~:rolleyes:

lol
my old tower bar

[spoon fit]

oh typeG, by the way, hows the roof of your car, the one that was thrown with a bottle???? have u fixed the dent yet????? hehehehe



bottle!? what happen?
never heard this be4... :confused:

[TypeG]

NOPE
CRY
and too lazy to go to Dent Dr

[TypeG]

yeah yeah watever... we all know how far ur credibility goes... :rolleyes:

all what i am saying is the fact
:wave:

[spoon fit]

what happen?>

[civiceg9]

he got attack by a killer VB beer bottle lol :D
Lucky it didn't smack the windscreen.

[asiansquad]

Any squeeks, rattles or creaks once installed?
yeah..i'm still trying to figure out wha'ts causing it..i think it's some of the stuff i have in the back

[asiansquad]

why only sold in set of 6? cant i just buy whichever pieces i want? :( coz i dont like the room bar and the rear strut bar. pls PM me individual prices if possible...thanx :cool:

having all 6 is good..i got 6 installed now.

handling is alot better..can ask crazyray what i was doing with my car :D

[strepto]

I dont like that the welds look shitty...

[spoon fit]

having all 6 is good..i got 6 installed now.

handling is alot better..can ask crazyray what i was doing with my car :D

u got 6???
y dun u show us on last meeting?

[bagaichiban]

u got 6???
y dun u show us on last meeting?

I THINK he got them fitted the next day morning? not sure though...

[TypeG]

wei.... u got ****in problem with me???? u wanna meet up????
i have had enuf of u

u have had enough of me? LOL what is enough
proof it

[spoon fit]

hey! danny and gaspar...
keep on thread pls pls pls

[Zimp13]

yeah..i'm still trying to figure out wha'ts causing it..i think it's some of the stuff i have in the back

all installed no problem except ur car... hahahah..... always ur car man.... install strut and engine light come on.....

[spoon fit]

all installed no problem except ur car... hahahah..... always ur car man.... install strut and engine light come on.....


hahaha............................:D

[Zimp13]

thats the truth man... and he even asked me how come light on after the strut.... hehehe.... ask ronald.... hehehehe

[asiansquad]

my car is special and virgin..danny popped it's cherry and it was bleeding thats why the light came on :(

[MRFIT]

now......... that's dirty........... :(

hahahahaha....... j/k

ronald......... u were too rough when you first had the car...... :D

[asiansquad]

hahahaha

[spoon fit]

ronald, take some pic pls

[asiansquad]

ok..i'll do it tomorrow if i remember..hahaha
which one do u want a pic of??

the 6th bar?

[spoon fit]

room bar

also y u dun get the tie rod as well?

[asiansquad]

i'm thinking about that

[strepto]

There is a LOT of postwh0ring going on in here... MODERATOOOOOOR?!?!?!?!?

[redliner]

does this come for other model like 5th gen prelude ??

[Zimp13]

does this come for other model like 5th gen prelude ??

can certainly check out.... heheheh....

[papaya]

lol
my old tower bar

More polite way to say this is perhaps :

1. The one I sold to him ...
2. The one I was using ...

ppl might get offended when you say that they are using your "OLD" stuff ...

[redliner]

who do i talk to about it, any idea??
cheers

[Fizz]

:D i know this is out of topic, but have anyone here tried those 'foam-stiffening' for the chassis?

basically what it does it you inject a certain kinda foam into the A & B pillars as well as the door sills on the bottom...the foam expands and hardens almost rock hard and its supposed to stiffen the chassis while reducing road noise & vibrations into the cabin.

apparently its used by a few car manufacturers in their luxury models and also some car tuners used it for their race cars.

[TypeG]

More polite way to say this is perhaps :

1. The one I sold to him ...
2. The one I was using ...

ppl might get offended when you say that they are using your "OLD" stuff ...

that's what i mean:thumbsup:

[Bloss]

These in my car.... :D

http://img349.imageshack.us/img349/7547/jazz00207cz.th.jpg (http://img349.imageshack.us/my.php?image=jazz00207cz.jpg)
Boot Strut

http://img349.imageshack.us/img349/7440/jazz00243rp.th.jpg (http://img349.imageshack.us/my.php?image=jazz00243rp.jpg)
Inner Rear Bar Strut

http://img210.imageshack.us/img210/4365/jazz0027c6xt.th.jpg (http://img210.imageshack.us/my.php?image=jazz0027c6xt.jpg)
Tower Bar

So where can I buy this 5 strut kit?

Bloss

[asiansquad]

So where can I buy this 5 strut kit?

Bloss

msg zimp13 he'll be able to help you

[Bloss]

Thnx - that's who I meant to msg!!

Fingers did the walking up wrong path!

Bloss

[MR Spyder]

:D i know this is out of topic, but have anyone here tried those 'foam-stiffening' for the chassis?

basically what it does it you inject a certain kinda foam into the A & B pillars as well as the door sills on the bottom...the foam expands and hardens almost rock hard and its supposed to stiffen the chassis while reducing road noise & vibrations into the cabin.

apparently its used by a few car manufacturers in their luxury models and also some car tuners used it for their race cars.

Yup, have heard of this chemical. Haven't got a chance to try it out yet though.. :o HMmm...

[MRFIT]

i've seen this on best motoring videos too..... they pour liquid like substance into the chassis.... seal it.... let it set... i doubt it very much that anyone here is gonna DIY at home though..... :D

[MR Spyder]

Hehe.. I'm actually very interested in experimenting with such a product..
Next question in mind, is where, and how do I get it?? :(

[Zimp13]

Just gotta know that Xforce struts not available in Australia no more... only wat left in the country..... what a waste

[ahcash]

Just gotta know that Xforce struts not available in Australia no more... only wat left in the country..... what a waste

why is that?

[Fizz]

i've actually read about this product when i went back to malaysia recently for holidays. it was featured in one of the local car magz, and apparently they said it was good. so i went to the shop to check it out, the guy showed me a sample of the foam poured into a mineral water bottle....the bottle was just rock hard! no kidding! and it weighed almost like an empty bottle too. i was really interested to try it out but unfortunately he didnt wanna sell any to me to bring it back to Oz....would have loved to experiment with it myself :D

[Zimp13]

why is that?

Not enuf sales.... as usual... hehehe.... no one got the money here.... so they gonna scrap the product in Australia.... from wat i know only 2 brand new sets left, no more..... :D

[Zimp13]

i've actually read about this product when i went back to malaysia recently for holidays. it was featured in one of the local car magz, and apparently they said it was good. so i went to the shop to check it out, the guy showed me a sample of the foam poured into a mineral water bottle....the bottle was just rock hard! no kidding! and it weighed almost like an empty bottle too. i was really interested to try it out but unfortunately he didnt wanna sell any to me to bring it back to Oz....would have loved to experiment with it myself :D

where is the shop in Malaysia? Y didnt wanna sell to u to bring back to Oz? How much? mayb should open up a new thread with this topic....

[MR Spyder]

Zimp13, I might be able to try out this new 'stuff'.. Wait for news on this.. :)

[Fizz]

where is the shop in Malaysia? Y didnt wanna sell to u to bring back to Oz? How much? mayb should open up a new thread with this topic....

the shop's in KL, somewhere near the Vistana Hotel. i dont know why he didnt wanna sell to me, but he said that he orders it from USA or something. i actually think it will work in a way coz filling up the hollow pillars and door sills should be able to cut down some road noise and vibrations...should make for a more pleasent ride and might improve the stereo sound quality....

[Zimp13]

the shop's in KL, somewhere near the Vistana Hotel. i dont know why he didnt wanna sell to me, but he said that he orders it from USA or something. i actually think it will work in a way coz filling up the hollow pillars and door sills should be able to cut down some road noise and vibrations...should make for a more pleasent ride and might improve the stereo sound quality....

i believe its gonna work..... just a matter of getting them....

[MRFIT]

Better seal up all the holes before you pour that stuff in...... otherwise its gonna go everywhere...... :) and it will be a mess to clean up....... especially after it sets and became hard....... :D

[utility]

zimp, still, u won't sell struts separately?
room bar and the boot bar looks too racy whoever comes in u know
or if anyone wants these two bars, pls make a sound

[Zimp13]

zimp, still, u won't sell struts separately?
room bar and the boot bar looks too racy whoever comes in u know
or if anyone wants these two bars, pls make a sound

all struts sold anyway.. no more.....

[asiansquad]

too bad

[crazyray]

hahahaha

hehehehe

i got 1 of dem :D

[jtanoyo1]

all struts sold anyway.. no more.....

I guess I am the last owner of this strut kit? And I am not even in OZ.... :wave:

[MRFIT]

I guess I am the last owner of this strut kit? And I am not even in OZ.... :wave:

I think he meant there is no more in OZ...... :(

[Zimp13]

I think he meant there is no more in OZ...... :(

so far that was wat i was advised.. no more in the future... but who knows they might change their minds? heheheh

[spoon fit]

no more!? then i might get the js racing one

[Zimp13]

no more!? then i might get the js racing one

get lor... suits u more anyway.....

[spoon fit]

yap, thinking summit or js racing

[Zimp13]

yap, thinking summit or js racing

yes, go for it man..... different ppl different budget.... dont waste ur time... buy buy buy!!!!!!!!!

[Zimp13]

Room Bar

http://img57.imageshack.us/img57/5817/bootbar32ay.th.jpg (http://img57.imageshack.us/my.php?image=bootbar32ay.jpg)

http://img57.imageshack.us/img57/8221/bootbar23kd.th.jpg (http://img57.imageshack.us/my.php?image=bootbar23kd.jpg)

http://img57.imageshack.us/img57/9674/bootbar10vo.th.jpg (http://img57.imageshack.us/my.php?image=bootbar10vo.jpg)

[Zimp13]

does this come for other model like 5th gen prelude ??

sorry nothing for your car....

[BigWillieStyles]

350 that is such a steal, whered u get that for this price, or was it a personal arrangement.

[asiansquad]

can't get them anymore :P

[crazyray]

350 from memory was only for 5 bars!

but yeah can not get them anymore!

got my hands on the second last set :D

[Zimp13]

350 that is such a steal, whered u get that for this price, or was it a personal arrangement.

not for many ppl.... they still think expensive.... :rolleyes:

[tanghy]

got spoon lab?

[spoon fit]

lab??

[tanghy]

lower arm bar
i think ahcash got

[asiansquad]

ahcash got xforce..doesn't he?

[Zimp13]

you all got the lower arm bar

[spoon fit]

how much for the inner bumper bar?
any pic?

[Zimp13]

how much for the inner bumper bar?
any pic?

u seen it before at my place sunny.... pic on the car posted oredy here....

[crazyray]

that is the one that sits inside the rear bumper sunny

[Zimp13]

managed to get hold of the last set of 6... just wondering anyone interested???