HELP!!! mouldings, side strips, seals

[Dtegra]

hey guys getting my car painted in next few days jus gotta do sum minor repairs

now i wanna take my window strips off land all the other strips on the car so the new paint wont be at the edge of them itl be a total respray coz u see in time it tends to chip away il show u pics of where i mean
and then please help on how to remove
http://www.amihotornot.com.au/album/photos/12807-2005720134850.jpg
1. thats the roof plastic strip either side

http://www.amihotornot.com.au/album/photos/12807-2005720134823.jpg
2. thats the corner around the front windshield that looks tricky to remove but i have to..

http://www.amihotornot.com.au/album/photos/12807-200572013487.jpg
3.thats the stip down the windshield same as number 2 but down the side

http://www.amihotornot.com.au/album/photos/12807-2005720134746.jpg
4, thats the strips around the rear quater windows pretty much same as all the windows have to take them off to

http://www.amihotornot.com.au/album/photos/12807-2005720134724.jpg
5. thats the side moulding im painting these the same colour as the car but i will be taking them off to paint individually or do u think i should leave them on

http://www.amihotornot.com.au/album/photos/12807-200572013470.jpg
6. another view of the rear quater window strip

i know this may be a boring post but any info would be good on how to remove this stuff please help a.s.a.p

[tegboy]

The side body mouldings are pretty easy to remove, just take off your door trim and there are little clips that you squeeze and the trims pop off.

Definately remove all things you can, it makes for a much better paint result.

If you can get hold of a helms manual for your teg, will tell you how to remove everything on your car.

I can make you a copy if you want!

[armak81]

1. slide the roof mould towards the rear windscreen (held on with slide clips) grip the mould by the ends
2. not sure
3. not sure
4. remove door trim. you will see it is held onto the door by 3-4 clips. be careful. they can break easily
5. remove door trim, use plies to remove clips. be careful not to bend the moulds too much
6. not sure

hope this helps

[mooshie]

don't the side window surrounds just pop straight off? on an older car plastic tends to get a bit brittle so be very careful with the clips etc.

[jdmlvn]

isnt it disposible?
like when every car is re-sprayed u have to go through that process?

[LS Integra]

why do u want to get rid of the tahitian green teg? :( mines tahitian green and ne1 that went on the LS cruise can vouch that it looks decent man..

[Dtegra]

tahitian green lol its called jasper green metallic playa
bg 22m is paint code also

im gettin a much nicer colour anyways will look sweet
(ask fr33k) thanks for ur help guys i dont mind if i break the parts i can get more but for how much right

[tegraa]

DO not break the door moulds! I did. It is was a very stupid mistake.

Before you break anything ring Honda and find out what there worth!
Once you find out the price of replacing these, you will be treating them like gold.

[94integragsi]

yeah bloddy oath, i had this problem and ha my honda sprayed and i stuff my side moulding..... 1300 colore coded for the lot, btw im looking for side strips any got sum