TODA cams

[HVtiR]

IF i put toda type c cams in my car wif da springs u guys think there will be any diff? i already have h/i/e and bigger air inlet mainafold

vti-2 edit: updated title

[McChook]

they will do a lot - but you won't be happy driving it, the power band will be very top end. Well, from my experience anyway

do a search anyways, i am sure this has been brought up before

[LatinoHatchCrap]

To run cams with that profile you first need to increase your compression ratio by at least 11.5:1. If you *just chuek em in* you'll be overcamming your motor and the gains wont make up for the costs of the cams and valve train. A better option if you plan on keeping your block stock is to use CTR or ITR cams with valve train.

-LHC

[DynoDave]

IF i put toda type c cams in my car wif da springs u guys think there will be any diff? i already have h/i/e and bigger air inlet mainafold

vti-2 edit: updated title

What engine do you have first, and before you fit any cams you would need to look at how you are going to tune your engine to suit the new cams.You will have to upgrade your ECU which is the most important part of making power.
Regards Dyno Dave