alarm wiring power lock / unlock

[itr224]

hey guys need some help, i have almost finished wiring up my new alarm to the car and have come across a problem. Car is 2000 dc2 type r.
I can't seem to find where the power unlock/lock wire is to connect up to the alarm, it is the only wire i am yet to find.
Was wondering if anyone on the forums would be able to help me or point me in the direction of where to find it

i have seen the wiring for the dc2 here http://www.team-integra.net/section...p?ArticleID=217

it says its the red/black and black/white but i have had trouble findiing the plugs that carry these wires.
anyone know where i should be looking? all help will be greatly appreciated
thanks.

[ICACHA]

you need to add a solenoid in the door!

[itr224]

already have one in there.

[ICACHA]

if its aftermarket then connect the wires, if its factory then read my post above :)

[ECU-MAN]

factory only has a door switch, not a solenoid/switch
you have to add an after market one. also you will fiond them wires in the drivers door

[Jomsy]

yeah and running extra wire's for the solenoid throught the factory door plug and insulation is a pain