Fastest B series ¼mile times for...

[MrPlow]

Im trying to locate some information on some current all motor record holders, or people who are close to records for the following:

Fastest EK (with b series)
Fastest EG (with b series)
Fastest B16
Fastest B18

Only post if you are certain or know roughly who, and with what setup the current person has, I dont wanna start a discussion - just basically would like to know the details and setup - and if pics of the cars can be post it would be a big help!

[blackdc2]

Im trying to locate some information on some current all motor record holders, or people who are close to records for the following:

Fastest EK (with b series)
Fastest EG (with b series)
Fastest B16
Fastest B18

Only post if you are certain or know roughly who, and with what setup the current person has, I dont wanna start a discussion - just basically would like to know the details and setup - and if pics of the cars can be post it would be a big help!

I ran 12.9 in a 1050kg integra, does that count?

[anna1984]

are you referring to anyone in syd? nsw? or all states round aust?

[MrPlow]

blackdc2 - I saw you run at WSID - very impressive...

anna1984 - Australia wide...

[HRV-80Y]

I ran 12.9 in a 1050kg integra, does that count?

damn...12.9 dats damn quick...

i fink dats the quickest b series ive heard run...

[Mooro]

Blackdc2 - was 12.9 running all motor? If so give us the specs.

[EG5]

http://img.photobucket.com/albums/v677/YonasLiu/misc/Rimg0151.jpg
here is jason blackdc2 timeslip.
and yes its b18cr allmotor

[Civic Type R]

My EK got 14.2 with B18c

I hope to get a high 13 when the track reopens in a few months time

[MrPlow]

Yonas - thats for your k series... im not interested in k series you show off!

Nice work Civic Type R!

[EG5]

Yonas - thats for your k series... im not interested in k series you show off!

Nice work Civic Type R!

the time slip that i posted above is belong to blkdc2 dc2 type R with b18c. not mine. :p

[Civic Type R]

I know someone who got 12.75 ALL MOTOR with B18c5. in his red EG :D
He is a good friend of mine

[EGB16A]

12.9 is damn fast... i'd love to know engine specs. care to share? :D

[MrPlow]

I would love to heard about some quick b series ek... or even some quick b16's

[Mooro]

There are some damn impressive times coming from all motor honda's. I must admit I'm quite surprised and impressed coming from the turbo rwd brigade.

What I want to now is how these times are being done. What mods were required.

[EGB16A]

There are some damn impressive times coming from all motor honda's. I must admit I'm quite surprised and impressed coming from the turbo rwd brigade.

What I want to now is how these times are being done. What mods were required.

pretty much everything is modified... unfortunatly

[Civic Type R]

How about 14.8 for a EK with B16A ? ALL MOTOR

[pgclee]

i think that time i saw a B16a, on hots four or smth...the last page where they got all those drag times...there is one doing like 11's...

[MrPlow]

Spec would be good on any of these cars, or even alittle more details..

anyone can post up (eg: i know a ek that does 13.5)

[EG5]

i think that time i saw a B16a, on hots four or smth...the last page where they got all those drag times...there is one doing like 11's...

allmotor?

[pgclee]

i'm not sure yonas...i think is under FWD...not too sure...

[Illegal]

Well in the U.S. it's all here.....www.fastestfwdstreetcars.com

[blackdc2]

i posted my specs in my drag racing thread i created when i ran 12.9, just do a search and you will find the mods i have

[barefootbonzai]

My friends EK4 did 14.8, his on the forums. And this was with full interier. No bottom end work, just all head work.

[panda[cRx]]

Well in the U.S. it's all here.....www.fastestfwdstreetcars.com (http://www.fastestfwdstreetcars.com/)

been a while since they updated it but some very quick times there :thumbsup:

[Illegal]

no one has changed yet I think.....prob not! Needs to be updated after I get on the track!

[euGeR]

i posted my specs in my drag racing thread i created when i ran 12.9, just do a search and you will find the mods i have

For the lazy ones :D

Jase's drag thread:
http://www.ozhonda.com/forum/showthread.php?t=19430

However I think they might want more details on the engine specs :D

[G AE82]

Fastest B16a all motor in Australia. I'm pretty sure that would be my car. See signature and timeslip database.

[MrPlow]

Now thats what im talking!

[Civic Type R]

Is this thread a discussion or a table/list of times with setups ?

[MrPlow]

I didnt want to much discuss - but its impossible for it not to be a discussion... I basically just wanted like G_AE82 has in his signature with some brief details on setup and maybe a pic.

[Chi]

LIghtness is the key.

[mini_s2000]

LIghtness is the key.
this is very true! and a good driver to match...

[Civic Type R]

Yonas is the key :D

[mini_s2000]

Yonas is the key :D
what does that mean?

[MrPlow]

Yonas is the key :D

Lets not go too far okay.... stay on topic!

[Civic Type R]

sorry, my bad..

[SPEEDCORE]

I shall have an entry for you late tonight early tomorrow. :)

[2MPRSS]

eg hatch b18c2 wit k&n panel filter extractors exhaust si-r pistons skunk2 replica intake manifold 14.449 @ 95 mph on stockies with 21 psi

[locote]

nice time 2MPRSS, how much the conversion cost ya??

[riceball]

hey guyz, i was down at the track last night along with a few mates and my trusty JDM b16a. Ran 15.1, with leaking aftermarket headers, 200 dollar exhaust and a slipping clutch. gotta mention my super duper heavy chromes :D. pretty impressed with my time, and im sure i can hit the 14 sec bracket once i fix some things up, and lighten my car abit more. oh yea, and i beat a sportsivo... oh yeah.... :cool:

[91OOM]

nice work on beating the sportivo. I plan to beat more than these fancy new toyota hatchys though when i start working on the b16a project of mine.

[sansinopaste]

i am running 13.1 with my integra VTIR. (jap spec type R engine, strip interior, semi slick)

[EG5]

i am running 13.1 with my integra VTIR. (jap spec type R engine, strip interior, semi slick)

I assume you are leo from melb?

[**Ghost**]

...i feel tension :P

[fried]

luzinit 14.9, intake, muffler, smurf.

[2MPRSS]

nice time 2MPRSS, how much the conversion cost ya??

a fair bit bro ;)

[HRV-80Y]

i am running 13.1 with my integra VTIR. (jap spec type R engine, strip interior, semi slick)

doesnt classify as a vtir anymore if its got a jap spec b18c

[Chi]

Yes it does, VTiR is the model of teh car.

Engine was a B18C2, now he has a B18C R.

You call it a DC2 VTiR with a B18CR. lol

[luzinit]

13.1 n/a? what was ur 60ft mate?

[BADHBT]

Yes it does, VTiR is the model of teh car.

Engine was a B18C2, now he has a B18C R.

You call it a DC2 VTiR with a B18CR. lol


its a VtiR-R

[BADHBT]

i am running 13.1 with my integra VTIR. (jap spec type R engine, strip interior, semi slick)


as every one isnt really that moved pls show your slip :thumbsup:

[dc2dc2dc2]

i am running 13.1 with my integra VTIR. (jap spec type R engine, strip interior, semi slick)

i smell bs...

but please prove me wrong with a time slip ! :rolleyes:

[MrPlow]

why do you smell bullshit, because your car doesnt do 13.1...

Be happy for the guy!

[LAGOOT]

i think the guy you are refering to is in the latest issue of autosalon mag.
its a vti-r with JDM b18c and stripped interior

[BADHBT]

nawwwwwssssss

[ginganggooly]

*shrugs* maybe it's got something in the way of internals.. ?

[mini_s2000]

is this the vti-r teg with type r engine thats for sale in melb?

[shurman]

yeah thats the vti-r out of the recent auotsalon mag... fully stripped one seater, looks mint - real tidy... its on carsales.com.au , nice work on the time leo :thumbsup:

it has 126fwkw or about 170fwhp

[EG5]

*shrugs* maybe it's got something in the way of internals.. ?

13.1@109mph very2 fast allmotor
the mph is a low 12 sec mph runs.
and i heard the 60ft is only 2.2 ish

jason black dc2r who got alot more power than this black vtir did 12.9@102mph only and jason's 60ft is 1.7sec.
both car share similar weight. so how did this vtir went 7mph faster ?

It will be interesting to see his time slip ( 60ft , 1/8 mile etc)

[pgclee]

leo = SRB 481 ? if its that car...hmmm....is running B20, not some b16 or b18....

[krisnatama]

Sorry,....what does it mean with all motor...? thanks

[gambate]

Sorry,....what does it mean with all motor...? thanks

natural aspirated, mean motor suck its own air for combustion..

[Illegal]

yep, no turbo, supercharger or nitrous

[tinkerbell]

13.1@109mph very2 fast allmotor
the mph is a low 12 sec mph runs.
and i heard the 60ft is only 2.2 ish

jason black dc2r who got alot more power than this black vtir did 12.9@102mph only and jason's 60ft is 1.7sec.
both car share similar weight. so how did this vtir went 7mph faster ?

It will be interesting to see his time slip ( 60ft , 1/8 mile etc)

well i ran 101.7mph with only 121kW

ET was 13.72 with 2.0 sixty footer...

but this was with BF drag radials,

do slicks slow your MPH down?

[tinkerbell]

was in stripped LS Integra with B20VTEC...

[pgclee]

hmm....may be it has NOS???...

[Civic Type R]

im fishing for my first sub 14sec pass on the 15th October at our Drag wars meet here in Perth. I havent got drag radials yet but im lookin hard for some.

[tinkerbell]

try to get some fresh 205/65R15's (falcadore size)

if you can, and run em at 20psi...

[Civic Type R]

Street rubber got me a 14.2 @96mph 2.2 60'
R Comp ADVANs got me 14.3 @95mph 2.1 60'

I wonder what those drag radials will get me

[pgclee]

may be you can improve your Launch, or try Flat shifting...and change your gear faster...Stiffer Sus also can improve your launch...try to advance your distributor...

i'm trying to get 13.1sec now..haha...previously i've done 13.47@103mph, Drag Radial, standard sus, rev to 10,000Rpm..now i got another 1,000rpm to go...hope i might get there..hahaha..but, i think i'm just too lazy..hahaha..i'm stopping all those race already..hahaha..

[ian]

Car: 2000 Honda Civic Vtir coupe (EM1) - stock B16A2.

Odo: 100,000kms+

Only mods: K&N panel filter in factory box, lowered springs, sway bar & tie bar, sunroof and leather interior.

Tyres: Stock dunlop tyres 195/55/15 (5years old) - 18psi tyre pressure at front and 40psi at rear.

Rims: Stock (15x6)

Weight reduction: removed spare space saver tyre & quarter tank of fuel.


Time: 15.380 secs @ 88.62mph - Wednesday 24 August 2005

[Civic Type R]

where can i grab 2 drag radials from ?
anyone ... ;)

[EG5]

get a full slicks , its cheaper

[Civic Type R]

but where can u get them from ?
Can Tanghy get some ?

[EG5]

but where can u get them from ?
Can Tanghy get some ?

email me.

[ALLMTR996]

do slicks slow your MPH down?
Normally no but even that EG that ran 12.3@109mph on 22" slicks I was watching when it had the drag radials on it a meeting or 2 before it ran the 12.3 and from memory it ran a 12.8@108mph. And then I was told they claimed another 30-40kw with quad throttle body's as well something with that car did not add up as gaining 5/10th's and 1mph going from drag radials to slicks + 30-40kw more.Slicks are not always the answer as the car needs the correct gearing and torque to pull the extra grip that they give you.
ALLMTR996

[fly_vti]

:) ive done 14.3 down the quarter on my gsr (b18c1) usdm engine! :D:D:D

[EG5]

Normally no but even that EG that ran 12.3@109mph on 22" slicks I was watching when it had the drag radials on it a meeting or 2 before it ran the 12.3 and from memory it ran a 12.8@108mph. And then I was told they claimed another 30-40kw with quad throttle body's as well something with that car did not add up as gaining 5/10th's and 1mph going from drag radials to slicks + 30-40kw more.Slicks are not always the answer as the car needs the correct gearing and torque to pull the extra grip that they give you.
ALLMTR996

with bfg drag radial we ran 12.886 @ 106mph ( 1.9 60ft)
m/t slicks + quads we ran 12.3 @ 109.53 mph ( 1.7 60ft )

Slicks is the answer to get a better ET

[Illegal]

:star: slicks will drop a half a sec. off your time from street tires, and drag radials all day long.

[ALLMTR996]

:star: slicks will drop a half a sec. off your time from street tires, and drag radials all day long.
With the correct size slick this will happen most guys go out and buy slicks that are to big in diamiater and it changes the gearing and unless there making good power it will not make that much difference.
ALLMTR996

[ALLMTR996]

with bfg drag radial we ran 12.886 @ 106mph ( 1.9 60ft)
m/t slicks + quads we ran 12.3 @ 109.53 mph ( 1.7 60ft )

Slicks is the answer to get a better ET
Good job guys :thumbsup:. So is it ture that you guys are not running this car anymore.
ALLMTR996

[tinkerbell]

do slicks slow your MPH down?

it is obvious slicks help ET by reducing 60ft,

how do slicks affect MPH?

[Civic Type R]

email me.
email sent :D

[locote]

my best run is 15.410 @ 87.63mph.
but my 60'foot was 2.343.
im looking at goin for some sort of drag compound to.
roughly how much would 2 drag radials to got on a 15inch rim cost???
would i get a lot more improvement if i desided to go for a higher final drive??
im currently running 4.2 stock gsi.
thinking of goin for something like 4.7 or 4.9.
and a after market LSD

[tinkerbell]

approx $450 to 500...

try running some high profile fresh rubber first, 205/65R15 at 20ish PSI

[locote]

i dont think ill fit 205/65 i=in my guards.

[tinkerbell]

try 14's then, also makes a lower final drive ratio, better accelleration... ;)

[locote]

i got 15s 195/50. street tyres but i might semi slicks in that profile i got a spare set of 15s

[tinkerbell]

semi slicks wont heat up enough and have much to stiff a side wall to be effective on a drag strip.

you need a l o n g contact patch, which is why you need a high profile tyre that you can let alot of air out so it bags out... providing you with a longer contact patch and hence more traction.

[locote]

so the higher the side wall is the more traction ill get???
so if i use 195/55 15s or 195/60 and heat them up i should get better launches

[j3z3z]

the only problem with running a low pressue to gain grip is with a larger contact patch at speed you cause tyre drag thus reducing your top speed

[tinkerbell]

quicker 60ft time vs lower top speed,

i know which one i woudl take, LOL!

i managed a 13.725@ 101mph with tyres at 20psi so i guess it was OK for me...

[tinkerbell]

so the higher the side wall is the more traction ill get???
so if i use 195/55 15s or 195/60 and heat them up i should get better launches

yes, certainly.

low profile tyres are useless for drag racing...

[locote]

thanks tinkerbell. im gona get a pair of new 195/55 for my spare rims and only use them at track!!!!
what brand do you recomend i dont want a full slik just yet.
but i want something that will grip i wanna get into 14s next time

[locote]

semi-slick in that profile???

[Civic Type R]

New PB for me yay !!

Was good to catch up with you Locote :)

Elapsed Time: 14.166sec.
Terminal Speed: 95.33 mph - 153.41 kph
60' 2.061

[tinkerbell]

YOU DONT WANT SEMI SLICKS

their sidewall is too stiff. they are made for going around corners, not going straight. VERY different purposes.

i used kuhmo Power Max 769 - were nice and soft and quite cheap...

[tinkerbell]

New PB for me yay !!

Was good to catch up with you Locote :)

Elapsed Time: 14.166sec.
Terminal Speed: 95.33 mph - 153.41 kph
60' 2.061

w00t!

great 60ft = did you get drag radials?!?!

almost 13's, you must be happy :)

[locote]

yea same here.
too bad you didnt race that magna, you would have taken that smile of his face after he beat me:)
i found out i have a P75 obd2a ecu.
im taking the safc off.
and i wanna go hondata later on once i have completed all my engine mods.

[locote]

sorry wrong thread hahah.

[Civic Type R]

cheers tinkerbell and guess what.
I did use R comps again. Its the best I could get and the drag radials were too expensive for me. I just sat on the burnout pad for 10 secs each time with plenty of smoke billowing everywhere ;)

[tinkerbell]

wow! you should be ultra-proud of that 60ft with semi's :cool:

[Civic Type R]

hell yeah !

I launched it at 5000rpm using a stock B16A2 ECU too :D

[EG5]

New PB for me yay !!

Was good to catch up with you Locote :)

Elapsed Time: 14.166sec.
Terminal Speed: 95.33 mph - 153.41 kph
60' 2.061

fast 60ft , good ET :)

[Civic Type R]

cheers yonas :)
6knot headwind but no excuses for getting into the 13's ..

[EG5]

cheers yonas :)
6knot headwind but no excuses for getting into the 13's ..

I will drag my b16a EG hatch soon.
We'll see how it goes , I want 13.99 :)

[mini_s2000]

New PB for me yay !!

Was good to catch up with you Locote :)

Elapsed Time: 14.166sec.
Terminal Speed: 95.33 mph - 153.41 kph
60' 2.061

well done! great time!

[SMEAGLE]

**** up b series ****ers. h22a will whoop ur ass... ****ing b series nuggets

[tinkerbell]

crawl back in your dirty hole SMEAGLE

[mini_s2000]

**** up b series ****ers. h22a will whoop ur ass... ****ing b series nuggets

thats not nice?

[MrPlow]

**** up b series ****ers. h22a will whoop ur ass... ****ing b series nuggets

Funny that, im yet to loose to a h series honda with my b series....

[locote]

AND that he hasnt posted a timeslip in his profile:)

[Blew_lude]

Funny that, im yet to loose to a h series honda with my b series....

is that so?
wanna put ur money where ur mouth is?

[tinkerbell]

is that so?
wanna put ur money where ur mouth is?

yes.

yes i would.

EDIT: doh, he wasn't talking to me :(

[BADHBT]

oohhh this could be interesting!

[DynoDave]

**** up b series ****ers. h22a will whoop ur ass... ****ing b series nuggets
Wait till ALLMTR996 reads this.:eek:
Regards Dyno Dave

[ALLMTR996]

**** up b series ****ers. h22a will whoop ur ass... ****ing b series nuggets
You must have a small dick to make comments like that because you are just looking for attention.Read the first post before you write BULLSHIT comments like this MR Plow asked for fastest B-Series times and not H-Series times.If you want to talk B vs H start another thread.
ALLMTR996

[wynode]

SMEAGLE is a forum troll with nothing good to say so lets just ignore his immature comments guys

[Q_ball]

SMEAGLE must be lebanese

[mj3610]

H22A is overrated...

[online]

H22A is overrated...

Would you say it's over rated or under rated?? just remember what engine holds both NA and Turbo records in the country dude.. I think you better think a little before you post! I love them both so i am not fussed.

[mj3610]

im not doubting it's potential, im saying its overrated, something is overrrated when its given too much value and attention than it should be given or what most people give..., SMEAGLE is a prime example

[online]

im not doubting it's potential, im saying its overrated, something is overrrated when its given too much value and attention than it should be given or what most people give..., SMEAGLE is a prime example

how can something be over rated when it has so much potential.. hmmm.

[Q_ball]

^^ there there guys, keep the peace :)

they both great engines with huge potential for mods and gains

at least we can all agree that SMEAGLE is leb ;)

[mj3610]

lmao @ qball u leb lover

[redliner]

hehehehe
i dont get the point of it being over rated as well

so i heard online using H22A engine on their drag car, i like to see the time that baby!

btw q_ball is a leb :p j/k

[Q_ball]

btw q_ball is a leb :p j/k
hahhaaha
n my car is a wrx with an integra body kit LOL

[Da1nONLY]

H22A is overrated...

H22A's are nice engines....=)

[STOCK]

The motors do make the power, just that honda puts them into big heavy cars that are too heavy to go fast STOCK.

[todaek9]

people just don't know what Honda's made off...

[shmivic]

b16a2 eg4 mx

et: 14.821
60ft: 2.4
mph:94.83

17" rims (40 psi), 2000rpm launch, 7800rpm "safe" rev cut (car still untuned), no vtec in 2nd gear
thats mine for now

[JESPER]

With all due respect to the guys at Online, why is it that most, please read that again, most, of the guys in the States run Bseries over H?? Well, until the K come along that is.

Not looking to start a war, jus after some info to educate my n00b self.


-BEN

[DynoDave]

With all due respect to the guys at Online, why is it that most, please read that again, most, of the guys in the States run Bseries over H?? Well, until the K come along that is.

Not looking to start a war, jus after some info to educate my n00b self.


-BEN
The H is not supported by the aftermarket industry like the B or K engines are and that is why not many people use them.
Regards Dyno Dave

[JESPER]

The H is not supported by the aftermarket industry like the B or K engines are and that is why not many people use them.
Regards Dyno Dave

Thanks mate :thumbsup:

You have a PM too :D



-BEN

[2MPRSS]

With all due respect to the guys at Online, why is it that most, please read that again, most, of the guys in the States run Bseries over H?? Well, until the K come along that is.

Not looking to start a war, jus after some info to educate my n00b self.


-BEN

seen a few drag crx using h22 doing 10s and less. One was built by 2 brothers in there own garage, mum was pissed off

[j-specAccord]

H22A yeah yeah!

[EG5]

back in 2003 , Mark Brauning H22a powered EG drag car did 10.50sec.

[JETYPR]

Steve Kaddour ran 11.4 in sydney in his integra turbo, im hoping to beat this before my car is featured in Fast Fours and Rotories should be about April. If anyone knows of anything faster let me know cause its the fastest i could find for integra's

[Q_ball]

wen did this thread turn into a H vs B engine thread??? iffies!!

[ALLMTR]

Dont all racing threads turn into H vs B vs K threads?

[todaek9]

i wonder what time did a worlds quickest fwd streetcar does on the strip???...hmmm..

[j-specAccord]

eric aguilar pulled 10's in an all motor EG civic coupe, there is also a CRX all motor pulling 9's not sure who sponsers that one thou

[EG5]

Steve Kaddour ran 11.4 in sydney in his integra turbo, im hoping to beat this before my car is featured in Fast Fours and Rotories should be about April. If anyone knows of anything faster let me know cause its the fastest i could find for integra's

is this still an ALLMOTOR thread ?

[chargedek]

In NZ (you probably don't care) but a guy named Aaron Bennet has run a 12.67@173k
http://profiles.nzhondas.com/profile471.html
^^^^here is his nzhonda profile,theres 2 other 1800s in the 12s

[jezB18c3]

hi hope i didnt confuse u all but im predicting 12.5 in my ef9 if all goes right. motor is making enough power and everything is setup sweet so i guess it is all up to my driving, hopefully will run in a couple of weeks just as soon as i get the time and tuning money. will keep you all updated.

[vtecbrad]

Well i ran a 20.6 @ 63mph in my girlfriends car

[vtecbrad]

oh hang on this is a Honda site not a Festiva site
lol
1.3l Auto Festiva. Now that is a POWER HORSE!!!
My best with a Gtech Meter is:
15.02 @ 98.8mph
The Mph sounds very fast so i am abit unsure.
I know i was going damn fast but i am still unsure of that speed.
My next P.B is 15.32 @ 95.3mph 0-100 6.86secs sounds about right.
now for the cams & ecu would love to be around the 14.5s

[Civic Type R]

oh hang on this is a Honda site not a Festiva site
lol
1.3l Auto Festiva. Now that is a POWER HORSE!!!
My best with a Gtech Meter is:
15.02 @ 98.8mph
The Mph sounds very fast so i am abit unsure.
I know i was going damn fast but i am still unsure of that speed.
My next P.B is 15.32 @ 95.3mph 0-100 6.86secs sounds about right.
now for the cams & ecu would love to be around the 14.5s
WHOA yeah dude your GTech meter is way off.
98.8 will get you 14.0 pass with a 2sec 60' start.

[ALLMTR]

Yeah your right, his Gtech is way off. A Gtech will be closer on time and overestimate the MPH, generally.

[vtecbrad]

ah so the 1/4 mile time would be close then. so ignore the mph?
easy done.

[justrunit]

SMEAGLE must be lebanese

ACTUALLY HE IS A NORTHERN VIET

[locote]

GTECH doesnt take wheel spin into account,
in a real track the timer will start as soon as you cross the line.
GTECH wont start timing till it detects enough Gs.
i was pulling low 12s with my last car with a gtech, but only managed mid high 12s at motorplex.
and the term speed was way out to.

[locote]

brought my PB to 15.174@91mph

[UgleeRedek]

EK4 with B20 VTEC

1/4 Mile: 13.345 seconds
Terminal Speed: 172kph/ 107 mph
60' Time: 2.133

[tinkerbell]

EK4 with B20 VTEC

1/4 Mile: 13.345 seconds
Terminal Speed: 172kph/ 107 mph
60' Time: 2.133

any specs on the B20VTEC?

built internals or stock?

nice time on street tyres :)

[tinkerbell]

dont worry, i found them:

ENGINE HARDWARE: B20B lower block with B18C Head: VTEC
- "Frankenstein" Hybrid Engine
- Heavy Machining done on engine
- Block Guard
- Port & Polished VTEC Head
- Forged Pistons 84.5mm: Compression Ratio 12.8
- TODA B Cams
- Eagle H-Beam Conrods
- ARP Bolts & Studs

http://carsales.com.au/pls/carsales/!cs_content.private_vehicle?vehicle_id=3076569&current_rec=2&used_rec=0&total_rec=3&sort_type=&total_rec=3&sort_type=&make_id=19&model_id=74&keyword=VTIR&state_id=8&search_distance=25

[barefootbonzai]

I just ran my B16A EK last week and got 14.6 all nite long. Quite happy with just bolt on goodies.

[locote]

What was ur term speed dude???
Didnt u have a teg???

[dsp26]

GTECH doesnt take wheel spin into account,
in a real track the timer will start as soon as you cross the line.
GTECH wont start timing till it detects enough Gs.
i was pulling low 12s with my last car with a gtech, but only managed mid high 12s at motorplex.
and the term speed was way out to.

yes it does. bah you people don't understand how it works!!! i'll quote someone else who had explained it better:



Seriously, they ARE ACCURATE. The physics behind them is 100% and when used properly they are very accurate. Unfortunately its when they're not setup correctly ie road not level, unit not setup level and straight etc when inaccuracies creep into things.

They work using an accelerometer. By using simple physics equations taking into account acceleration vs time the units can calculate speed and distance. If you've done and passed yr 12 physics you'll know what im on about.

Wheelspin doesn't affect the g-tech's readings as all it is measuring is how fast you are accelerating, if you spin your wheels all you will do is accelerate at a slower pace.

Put Simply.

G-techs are VERY accurate devices It has been proven on the strip by a member of these forums in a thread some time ago.

HOWEVER if the setup of the unit (including road sloap, unit slope, calibration, etc) is not close to ideal then readings will be inaccurate.


remember that G-Techs are not connected to any sensor input in a vehicle... just the ciggy lighter. it has its own sensors that use G-Force.... can you guys then tell me how the hell wheelspin DOES NOT reduce G-Force if you are obviously accelerating at a slower pace as a result?!?!?!

seriously, take a gtech to a track with you and they are FAIRLY ACCURATE/CLOSE!!! As mentioned above it has to be setup courrectly though most of the time its USELESS ON ALMOST ANY ROAD!!!

[barefootbonzai]

What was ur term speed dude???
Didnt u have a teg???

Speed was 94-95mph each run.

I've never owned an Integra.

[VTi_b0i]

does anyone know roughly wat times a EG sedan with a b16a and a b18c (vti-r) would get? just stockish...

[UgleeRedek]

14.8sec?

[locote]

Ive tested a gtech at same time as im runing at track.
Yes it was fairly accurate, term speed was out.
An no if i ran a 13sec time using a gtech in my teg as it is atm, i wouldnt boast about it.
1. running a 1/4 mile timein the street is illegal.
2.There are alot of factors at the track that determine the time you get.

Ive used a gtech on my teg and run mid high 14s on it. and yet my best time at track is 15.1.

[xtercii]

I don't believe in gtech, they might be accurate for some time, but for a lot of other times they are inaccurate.
I remember hot4s once did a gtech test on hyhundai coupe and they recorded 0-100 and 400 time of low 7s and low 15s respectively, I couldn't believe they would even publish bullshit figures like that to the public...
Next time I wanna strap it on my body and see if I can break to the magical 16second mark...