Integra 94 vtir rear suspension question

[CL455]

hey guys need to find out some info about a 94 rear suspension setup.... was wondering on the 94 tegs at the bottom of the strut is it a U-shaped or a Ball shaped that the strut connects to...

i would check on my teg but unfortunaly my integra isn't in the same state... so if anyone could help me out or just check there integra and just let me know wat it looks like that would be greatly appriciated...

thanks in advance...

[PLYBOY]

it depneds on the integra.. in NZ, we have the fork type which is the NZDM integra.. or we have eye, which is generally the JDM model teg..

[CL455]

yea that wouldn't help sorry... but yea i need to find out weather its a U-shaped or ball shaped on the rear...

if any can help it'll be great...

[PLYBOY]

that is what im talking about..

You might want to explain your post a bit clearer..

[CL455]

ohhh ok... sorry.. well on the rear of the teg there's a bit where the bottom of the rear strut connects to ..... wanted to know if that bit that it connects to is a like a ball shaped... or a U-shaped...(which sorta looks like the fork type in NZ and ones i've seen in the states)

hope that sorta clears it up..

[wynode]

Are you talking about the Lower Control Arm and how the shock absorber/damper sits on the LCA ?

In Australia, only the DCR has the pin shaped mount whereas all the other tegs use the U type.

[CL455]

cheers, thanks for that.... i was pretty sure that was the case but wasn't 100% sure...

[tanghy]

U Shaped