Final drive help

[ekslut]

I'm in need of a bit of help. I bought myself a CTR gearbox a while ago, but am only just getting around to fitting it. Upon having a good look at it I found out I am missing the LSD and final drive. Tried to contact the seller, but no luck so I am going to have to fix it myself.

Now, beacause I need to get a new final drive, will the 4.7 from the ITR fit straight in, or will I have to stick with the 4.4 from the CTR? Coz from what I have seen the 4.7 is much easier to find.

[tanghy]

u need the 1set gear, needle bearings & 1 or 2 more small parts to get teh 4.7 working the parts are cheap, contact me

[ekslut]

Alright, found out that the CTR final drive should be the same as a Integra VTI-R and the early model type R. But not the later model ITR with the 4.78 final drive. Oh well, sticking to 4.4 then I guess.

Thanks for the help Tanghy

[Limbo]

CTR final drive is same as a Civic VTi-R final drive of 4.4

[pgclee]

you'll need 1st gear, shaft, bearing and the final drive - 4.785

if you want higher, ATS - 4.929...