Grille Inserts

[CivicCoupe]

Im planning to mesh the grille inserts and the air dam on the front bumper. Just wondering can anyone recommend a place that will do a good job on it?

[_Wing_]

DIY?

[VTEC16]

i did a DIY grille....it looks kinda dodge from close up.....gonna buy a CTR style grille sometime...

[CivicCoupe]

Don't really want to do a DIY job.. mainly coz it'll probably look dodgy.. ;)

[ah789454]

if you got the money then buy the ctr grille but if not just DIY. take your time then it wont come out dodgy. it took me half a day to do mine and it came out very good. check it out. http://www.ozhonda.com/forums/viewtopic.php?t=3266&postdays=0&postorder=asc&star t=0

[-MuGen PoWer-]

hey i talk 2 a few ppl and they did DIY and i saw them it looks alright!!
and cheap 2 unless u wana buy a grill for 150 m get it sprayed

[eknine]

oem CTR grill for 150...thats a steal buy:)

[Morkz]

go to www.cybercentury.com.au they sell them there for about $100 but it's in melb so you would probably would have to get it sent up

[REK13S]

srs auto n carmate have it they got chrome ones n one u can paint

[CivicCoupe]

I see people also do the front bumper air dam thing..

have people done a DIY job on that as well?

[A'PEXi]

its not that hard, just buy the mesh, cut out the original plastic stuff in the middle, bend the mesh around the frontbar and glue it up

[CivicCoupe]

if you got the money then buy the ctr grille but if not just DIY. take your time then it wont come out dodgy. it took me half a day to do mine and it came out very good. check it out. http://www.ozhonda.com/forums/viewtopic.php?t=3266&postdays=0&postorder=asc&star t=0

I like how urs turned out. Looks great on the photos!

Are u planning to mesh the bumper bar too?

[eknine]

mesh bumper looks too ricy..imo:)

[ah789454]

i agree with eknine putting mesh in the bumper would be a bit too much.

[VTEC16]

I forgot to say that the 96-98 grille is much harder to do due to its one peice design....later model ek's have a two peice grille....so u can chuck the mesh in between...

[[[d a n n y]]]

go DERIC give it a go on the DIY

u go girl...!!! :D

[P'cisT]

On the topic of mesh, where can it be found besides that cheap looking stuff at Autobarn and Supercheap. I have heard Bunnings, but they sell fly wire! I only need a small piece thats about 1m by 0.2m so that rules out getting it from most metal makers as well.

[VTEC16]

Try different hardware stores.....you'll find some eventually...

[P'cisT]

Isn't the only mesh they specialise is the fly screen stuff? I want one more spread apart with bigger gaps.

[VTEC16]

Good hardware stores will have a variety of thick and thin meshes in different styles and colors.....

[P'cisT]

OK, I'll keep looking around.

In the meantime, if anyone already knows of any place, let us know.

[VTEC16]

I think (its late....it was a while ago...and iv had a few beers...) i got mine at pennhaulirics (i have no idea how to spell it) which is located in caulfield -near corner of hawthorn and glenhuntly roads.

[CivicCoupe]

OK, I'll keep looking around.

In the meantime, if anyone already knows of any place, let us know.

Sydney Special Vehicles sell mesh:

http://www.ssv.com.au/cache/header-49public__0-0.html?cache=no

xpensive shit tho..

[hondafever]

There are few type for EK model such as TYPE R grille and Mugen style grille. Type R grille came with Chrome or black. Check it out with Cyber Century at Melbourne.....Tel: (03)95475111. Hope it would help u