PDA

View Full Version : port and polish


ah789454
16-02-2004, 10:03 PM
where in sydney can i p&p my head. do i take it to a performance shop or do i take to and engineering shop.
Rowie
16-02-2004, 10:07 PM
give these guys a try maybe?

http://www.thornleighcylinderheads.com/
tofu R
16-02-2004, 11:29 PM
y do u want to PNP your car
what car is it ?
CustomCivic
17-02-2004, 11:01 AM
i dont know much about this sort of stuff but i went to a place a while back to get this done..

the guy said for the price you pay getting it done you get very little performance gain so its not worth it.
DarkCoupe
17-02-2004, 11:32 AM
what exactly are the benefits of this procedure ... if any?
MKI4EVA
17-02-2004, 11:56 AM
what exactly are the benefits of this procedure ... if any?

more flow > more air > more combustion > more power.
pornstar
17-02-2004, 11:57 AM
its very technical how it makes more power, but to be put simple, it makes the air flow faster, and smoother without turbulence into the cylinder. thus gains abit more power
DarkCoupe
17-02-2004, 11:58 AM
ok cool :)
BLKCRX
17-02-2004, 12:30 PM
Talk to Dave from Red Line motor sports (dynodave) he can organize to have your head ported / polished by the best people in Australia, amazing work.. But if you want more information he's the person to talk to on here.


Regards James
CustomCivic
17-02-2004, 12:38 PM
anyone know approximate prices for this sort of thing?
DynoDave
17-02-2004, 12:40 PM
Our porting starts at around $500 for a very basic setup so the more you spend the more you will get done.
Regards Dyno Dave
CustomCivic
17-02-2004, 12:51 PM
what sort of kilowat gain would i get?
Rowie
17-02-2004, 01:00 PM
Got a price from a local place up here and for just a head shave for compression your looking at around $60. Without labour.

And like Dave said, around $500 starters for P&P.