View Full Version : VTEC pressure valve
EGB16A
15-08-2005, 07:49 PM
I'm throwing codes 22 and 41.
anyway, before i run out and buy a new vtec pressure valve, is there anything i can do to fix it?
anyone got any advice or have a link to a site with some tech help.
also, i'm told there is no fixing the o2 sensor?
Anyone know where to grab one?
thanks
if u need a pressure sensor, let me know
ive got one of a SOHC vtec, i think they are the same?? anyone?
180sx
16-08-2005, 03:07 AM
vtec pressure valve?? is it this one ??
http://img.photobucket.com/albums/v415/auto_180sx/P0802_184113.jpg
i have a 1.5 SOHC vtec one and a 1.6 DOHC vtec one sitting in my garage ....
[[d a n n y]]
16-08-2005, 09:33 AM
isnt that 1 VTEC solonoid?
180sx
16-08-2005, 01:18 PM
sorry man ... i don't know much about honda .... my wrong
jdmlvn
16-08-2005, 04:39 PM
sohc?
EGB16A
16-08-2005, 05:29 PM
sohc?
b16a... dohc
civ_sik
20-02-2006, 02:03 PM
okay instead of making a new thread ill use this one...
does anyone know where the vtec pressure valve is on a b16a2 as my wire is missing and i need to hook into it...
thanks
ECU-MAN
20-02-2006, 07:57 PM
just under the the solenoid, should have a green conector
OBDII B16A2 will not have one
civ_sik
21-02-2006, 08:42 AM
thanks
its a eg6 which is a "jdm b16a" will it have one?
i swear there is no green connector lol
michael_antoi
21-02-2006, 08:49 AM
did a google
i think urs should look like this??
http://b16a.honda-perf.org/Tech/vtecsolenoid.jpg
EGB16A
21-02-2006, 09:44 AM
did a google
i think urs should look like this??
http://b16a.honda-perf.org/Tech/vtecsolenoid.jpg
correct... although i'm pretty sure that white wire shouldn't be there, looks like he tried to bypass the vtec pressure sensor if i'm not mistaken?
michael_antoi
21-02-2006, 09:47 AM
yeh should be only 1 wire AFAIK
civ_sik
21-02-2006, 04:30 PM
guess what my problem is lol.... its not there lol there is an empy slot in pin number d6 and and empty hole where that should be... where would i find one on these to buy?
civ_sik
21-02-2006, 04:31 PM
wonder why vtec is still coming in at 6800 rpm? anyway thanks egb16a and michael_antoi
michael_antoi
21-02-2006, 05:47 PM
go to a wreckers
cut off the ecu connector part and punch out one of those tiny pins.
connect the pin onto the vtec wire and insert that into your ecu plug.
ECU-MAN
21-02-2006, 09:08 PM
why add it, just fool the computer.
you dont realy need it
EGB16A
24-02-2006, 12:25 PM
why add it, just fool the computer.
you dont realy need it
this is done by grounding the vtec pressure valve wire right? or does it have to be connected to the solenoid wire?
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.