PDA

View Full Version : b16a error codes



alphabeatsco
16-08-2005, 04:13 PM
i did that DIY ecu test thingy.

even without doing that test, when i turn the IGN to ON, my car blips 6 times..is that normal? engine check light and all the comes on.

when i did that test thingy, no blips, but only the ABS flashing..is that normal? how can it be solved?

ProECU
16-08-2005, 05:11 PM
Does the check light go out on normal ignition?

alphabeatsco
16-08-2005, 06:10 PM
the engine check light, lights up and goes away on normal operation.
when i did the ecu test, i got the engine and srs light on all da time, which i think is normal.
but the abs, flashes and givng me codes.
is there a guide on what those codes mean?

alphabeatsco
16-08-2005, 06:55 PM
anyone can help?
desperate help guys

jackosimm
16-08-2005, 07:03 PM
Personally, I dont have any idea about this, however it sounds semi serious and even with many opinions in this thread later, I would call a Honda service department in the morning and they'll tell you/confirm whats been said.

alphabeatsco
16-08-2005, 07:08 PM
does anyone know where to obtain da ABS error codes guide?

ECU-MAN
16-08-2005, 09:18 PM
does anyone know where to obtain da ABS error codes guide?

there are different types of ABS

what year and model honda do you have

mini_s2000
16-08-2005, 09:33 PM
have you maybe looked at your cars log books? it might give some info?

alphabeatsco
17-08-2005, 03:41 AM
i have 1998 ek4 hatchback.

alphabeatsco
17-08-2005, 11:19 AM
anyone had these abs error codes b4?

spetz
18-08-2005, 01:03 AM
Well this thread has been hijacked!!!

The engine light... sometimes its on when the car starts, and sometimes it comes on while driving. More often than not the light doesn't come on though

ECU-MAN
18-08-2005, 08:18 AM
spetz, start a new thread


i sent you a pm





there is no code 16, your getting mixed up with 61 I think



code 18; Accumulator gas leak

code 54; Right rear Wheel lock

coed 61; fail safe relay

alphabeatsco
18-08-2005, 12:12 PM
i know there's a list of ENGINE error codes available.
but i've searched aorund .even in google.
nothing comes up for ABS error codes.
does anyone have a list?
for 98 ek?

spetz
18-08-2005, 01:04 PM
ECU MAN, I don't have any pm's??

alphabeatsco
18-08-2005, 03:36 PM
ALRIGHTY, I HAVE FOUND THE LIST OF ERRORS I'VE GOT FROM HONDA-TECH
IT SEEMS TO BE
1. wheel sensor(electrical noise/intermittent interruption) RR
2. wheel sensor(electrical noise/intermittent interruption) RL
3. fail safe relay
4. ignition voltage

does anyone know? r these expensive to fix?

ECU-MAN
18-08-2005, 10:36 PM
I was meaning you start a new thread and alphabetsco had a PM





ECU MAN, I don't have any pm's??

alphabeatsco
19-08-2005, 10:07 AM
anyone knoq how to clear the ABS codes,

ECU-MAN
19-08-2005, 05:38 PM
disconnect your battery for 30 sec.