egSi
25-08-2005, 12:11 PM
Disclaimer: The following is provided as a GUIDE ONLY, and neither myself, nor OzHonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!
Aim: Convert Stock eg5 Corners to psuedo JDM Amber Corners
http://undergroundimports.com.au/gallery/albums/userpics/10001/normal_step4.JPG
Time: 30min plus drying time
Required:
- Phillips Screw Driver
- Stained Glass Window spray(amber)
- Metho and rag
http://undergroundimports.com.au/gallery/albums/userpics/10001/normal_required.JPG
Info: Ok amber corners arent that everywhere here like in the US, ive seen like only a handful of them here on egs. Basically u cant just walk into any store and buy amber corners so i thought, **** paying for them and shipping them here and then they will prolly leak, ill just spray my stock ones, this is how it went. Easy as and saved me money and hassle!!
Big thanks to my girlfriend Rachel for taking the pics!!!
Step 1:
Ok take ur stock corners out, pop ur hood, and remove the screw holding the corner to the car.
http://undergroundimports.com.au/gallery/albums/userpics/10001/normal_step1.JPG
Step 2:
Carefully slide out, dont break and clips!!
http://undergroundimports.com.au/gallery/albums/userpics/10001/normal_step%202.JPG
Step 3:
Ok disconnect the power for the bulb and set that corner free.
http://undergroundimports.com.au/gallery/albums/userpics/10001/normal_step3.JPG
__________________
Aim: Convert Stock eg5 Corners to psuedo JDM Amber Corners
http://undergroundimports.com.au/gallery/albums/userpics/10001/normal_step4.JPG
Time: 30min plus drying time
Required:
- Phillips Screw Driver
- Stained Glass Window spray(amber)
- Metho and rag
http://undergroundimports.com.au/gallery/albums/userpics/10001/normal_required.JPG
Info: Ok amber corners arent that everywhere here like in the US, ive seen like only a handful of them here on egs. Basically u cant just walk into any store and buy amber corners so i thought, **** paying for them and shipping them here and then they will prolly leak, ill just spray my stock ones, this is how it went. Easy as and saved me money and hassle!!
Big thanks to my girlfriend Rachel for taking the pics!!!
Step 1:
Ok take ur stock corners out, pop ur hood, and remove the screw holding the corner to the car.
http://undergroundimports.com.au/gallery/albums/userpics/10001/normal_step1.JPG
Step 2:
Carefully slide out, dont break and clips!!
http://undergroundimports.com.au/gallery/albums/userpics/10001/normal_step%202.JPG
Step 3:
Ok disconnect the power for the bulb and set that corner free.
http://undergroundimports.com.au/gallery/albums/userpics/10001/normal_step3.JPG
__________________