PDA

View Full Version : Front end conversions for DC5R <-> DC5S, AUDM DC2 <-> JDM DC2, Etc.



_Daniel
26-08-2005, 11:31 AM
is it possible to fit a facelifted front end onto the audm dc5r's?
was having this discussion today in a lecture at uni?
can it be done? why/why not?

Felix
26-08-2005, 12:58 PM
They talk about this shite at Uni.?

faijai
26-08-2005, 06:42 PM
yeh i rekcon can be done but have to change the whole front
if not atlease headlights and bumpers.

integraz
26-08-2005, 07:54 PM
firstly what uni do u go to.. cuz i want in! LOL
secondly it is possible, but just diff wiring for headlights, its been done to a few times in america, log onto clubrsx.com.. i think the exterior section?
I've only seen a guy convert the back lights of an 2002 model to 2005 model, but im pretty sure you can do it to the front as well.
its not as difficult as the audm dc2r to jdm dc2r ..i think... with the need of radiator suport etc.

zco
26-08-2005, 07:57 PM
i think he means.. he and his friends were talking about it during a lecture.. not the lecture was based on this topic

Tofu
27-08-2005, 06:07 PM
you will need
front bumper x1, grill x1, headlight housing x2, and some extra plastic bits under the front bumper

you might also need to extend the wiring for the parker bulbs
they are in different locations in the headlight cluster

other than that, it's all sweet.

2NTICN
28-08-2005, 10:40 PM
how much difference is there between the two????
i didnt realise there was that much of a difference between the jdm and audm dc5R
than again i dont really pay that much attention to DC5R's
can sumone point out the differences???

jdmlvn
29-08-2005, 07:03 AM
yea..
replace the fenders and front bar. and do some re-lighting..

2NTICN
09-09-2005, 09:33 AM
if u can do a dc5r front end conversion on a Ek i dont see why u would have much trouble doin it on a audn dc5r

Tofu
09-09-2005, 10:10 PM
what's all this "if you can..." bs

the fact is, you will need all those things mentioned to do the conversion from DC5R to the 2005 DC5

stephen8512
09-09-2005, 11:15 PM
i thouught it was a conversion from an AUDM DC2R ????

_Daniel
09-09-2005, 11:35 PM
sorry typo in the heading
tho DC2 to DC5 Front can be done, I think carmate sells the kit

egads
10-09-2005, 09:28 AM
wait im all confused now, you want to put the dc5s front onto a dc5r? should be ok, im sure its just the panels, lights, bonnet, front bar etc.

JINRAI
10-09-2005, 10:40 AM
sorry typo in the heading
tho DC2 to DC5 Front can be done, I think carmate sells the kit

dude...what are you actually asking? I'l edit your title...u even got me confused :confused:

_Daniel
10-09-2005, 03:55 PM
can u change it to DC5R thanks :)

just wondering if the DC5S ---> DC5R was like the jdm to audm conversion for DC2

JINRAI
11-09-2005, 11:28 AM
^^ done :)

nipnip
11-09-2005, 05:03 PM
sorry typo in the heading
tho DC2 to DC5 Front can be done, I think carmate sells the kit

:confused: .......... aaarrrrrrrgggggggggghhhhhhhhhhhhhhh!!!!!!!!!!!!!!! !!!!!!

unluvedboi
11-09-2005, 05:20 PM
anything is possible if you have bling to burn :D

snowman95
11-09-2005, 07:20 PM
yes you can do dc2 > jdm dc2 conversion.

same with the dc5 aswell.

Tofu
12-09-2005, 10:26 PM
no...
doing a JDM DC2 conversion is alot harder then doing a 2005 Conversion onto a 2004 model DC5

unlike the DC2 conversion...the DC5 you will not need to do any internal bodywork...it's mostly panel work plus wiring...
you will need different wiring harness becuase the headlights are different and the lightbulbs are in different locations. (ie, parker lights)

Tofu
12-09-2005, 10:29 PM
that Carmate DC2 to DC5 front conversion is full of BS!
i call their bluf until i actually see one.
i know you can do a DC5 front end conversion onto an EK but having a DC5 front on a DC2 and the part is sold by carmate...i doubt it..
if there is, then good luck to the person fitting it...lol

_Daniel
12-09-2005, 11:12 PM
yeh I saw the DC5 to EK Conversion at the autosalon

Q_ball
13-09-2005, 04:36 PM
u can do dc2 to dc5 as well :D

2NTICN
18-09-2005, 10:56 AM
how much would it cost to do a AUDM DC2R --> JDM DC2R front end conversion???

Duesta
18-09-2005, 11:22 AM
if you do a bit of research around the forums, AUSDM DC2R -> JDM DC2R is gonna set u back roughly 5K

dc-r
19-09-2005, 08:09 AM
i done mine early this year...
spend big money but jdm yard is selling cheapper now.
also ask jdm concept asm well.
these traders can get them for sure...