View Full Version : D SERIES ZC HEAD on a D16Y1????
hi all
is it possible to put a ZC DOHC head on my EG VTi with a D16Y1???????
if so where can i find one of these they seem really rare??????
will this increase my power by a fair bit????
Rufes1
22-02-2004, 09:59 PM
The ZC's came in the si's in jap. ZC's are based on the d series engine and yes you can put the dohc head on the d16y1 block.
The zc engines put out 137bhp (not forgetting they are non-vtec). So you will be looking at a bit under that.
For the price nd effort you will go to, I really dont think it is worth the very small power gains you will get.
No point. u will gain sfa witht he DOHC non-vtec head..
fried
23-02-2004, 02:58 PM
what other options is there for D series engines? what heads etc?
D-series, there is nothing more then really forceing air into the motor.
u can do a N/A buildup, but its going to cost u more then doing something similar with b-series..
do some searches, there are DOHC D-series going round though.. some nice numbers but they usually are on the bottle atleast.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.