Alarm/central locking playing up

[michael_antoi]

Trying to install my alarm system but it's not wired properly i think...

My alarm arms and disarms fine but when it is disarmed, i go and turn the key and the siren goes off, it only goes off for about half a second and turns off when the engine turns on.

My remote central locking is wired in reverse because when the alarm is disarmed it locks the car doors.


The alarm is a BW 9900

and i'm not sure of the central locking.

[ECU-MAN]

revers the two wires that trigger the cenrtral locking, that will fix that part

[michael_antoi]

thanks for that, is there a particular color i'm looking for to switch over?

[Z]

I'd say the blue and the green. (Someone confirm?)

[destrukshn]

yes blue green for the central locking.

[michael_antoi]

so i switched the blue and green wires leading into the central locking unit and nothing happened, the central locking stopped working.

so i switched them back

any ideas?

http://www.ozhonda.com/gallery/watermark.php?file=500/2692central-med.JPG

[destrukshn]

looks like you did the wrong one?
put em back to normal.
and in your door trim, if you have aftermarket central locking.
you should have a central locking motor in there, off that motor are 2 wires, blue and green, switch those 2 around.

above where you have highlighted, there's another set of blue and green wires, they look more like central locking.
what you do before you start cutting, is get a circuit tester, and lock and unlock your doors, and if the circuit test lights up when you do press em, you know it's the central locking.

edited: just saw the blue and green wires in the pic.

[michael_antoi]

yeah i switched the blue and green ones on my door, works now, thanks for the tip mate.

[destrukshn]

welcome buddy.
=)