PDA

View Full Version : removing tint



Steer^Gimic
05-09-2005, 11:05 AM
just picked up my new car and the previous owner did a diy on the tint. how can i remove it safley. the sides i should be ok with, but the rear is the worst, and i dont want the demister to come off with it. steam? water? sledge hammer?

anyone had experience taking this shiat off?

SHWCARCIVIC
05-09-2005, 11:54 AM
Theres a couple of ways to remove it, I used a heat gun and a product called Orange Solve that removes the glue. You can purchase the OS from any chemical store. Or you can take it to a tinting shop and get them to remove it for you...it'll cost you around $100.

baby_c
05-09-2005, 12:03 PM
removing tint is time consuming... but another was to do it is using a steam gun, holding it on the tint until u can sum it peeling and peel away =)

mj3610
06-09-2005, 01:13 AM
removing tint is $100, retinting is $200, i say take it to the tint shop and get new tints. and dont even try to take them off urself its a PAIN IN THE A**.

Sitwy
07-09-2005, 06:45 PM
use steam