View Full Version : color code
michael_antoi
07-09-2005, 09:24 PM
looking to spray some parts of my car...
where can i find the color code?
and how do i get paint in that color code?
how would it come? in a spray version?
bennjamin
07-09-2005, 09:32 PM
on the inside of your drivers or passenger's door is a colour code sticker - on the body of the car.
You can buy little touch up paint thingies from Honda - but afaik you cannot buy them in can-form. Best to get a professional to colour match it and spray the part/s for u
michael_antoi
07-09-2005, 09:59 PM
oh ok, would a place like bunnings do a color match?
if they do how much is that?
jdmcivic
07-09-2005, 10:04 PM
autobarn do it for about $25
mini_s2000
07-09-2005, 10:06 PM
you can call a honda dealer and they will supply you your colour only small enough for touch ups though...
michael_antoi
07-09-2005, 10:36 PM
what form does autobarn supply it in?
eg_08_wa
07-09-2005, 11:43 PM
take off ur fuel cap door and places will be able to match it to that colour.. well dats what my fren who is a panelbeater told me take off fuel door and take to a paint supplier and theyll match it 4 u
nexace
07-09-2005, 11:47 PM
Also depends on how old your paintwork is. Even if you get the factory colour code, the paint not come up exactly the same due to ageing.
Best bet is to use your fuel cover as mentioned above to match the colour properly.
milano red is r81 mike :)
Steer^Gimic
08-09-2005, 08:32 AM
paint code can also be on the i.d plate on your firewall.
autobarn can supply it as a tin for touch ups or compressed into an aerosole
DohcKeVTEC
08-09-2005, 06:55 PM
wat do u want to color code
michael_antoi
08-09-2005, 09:09 PM
side strips....the black ones..
pillow
09-09-2005, 12:04 AM
Like this?
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wNjY1Nzk3NnM0MTNkZmQzMXk1NDE%3D.jpg
timmya2
09-09-2005, 07:47 AM
yeh is that a backyard job?
side strips....the black ones..
if u paint ur strips man, do a diy on it. :thumbsup:
pillow
09-09-2005, 12:48 PM
yeh is that a backyard job?
Nope, mate mine is a panel beater
michael_antoi
09-09-2005, 01:27 PM
i'm gona give the DIY a go.
**Ghost**
09-09-2005, 01:37 PM
use plastic garbage bags to mask off the door while ur spraying...theres not enough newspaper in the world to do a proper job of masking... trust me, use garbage bags, seal with layers of masking tape and STRETCH the garbage bag TIGHT
DO NOT actually take the black mouldings off cos they NEVER fit back in...
lastly get the finest sandpaper u got and LIGHTLY buff the surface of the mouldings before u start
mj3610
09-09-2005, 03:49 PM
i used a4 pages to mask them with masking tape, but i did mine black again LOLLL
DohcKeVTEC
10-09-2005, 10:00 AM
d moulds yeah shold b cheap but get a pro to do it bcoz if u doit urself d color could b off
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.