EG civic breeze d13b valve clearance [Archive]

Vtec_inside

14-09-2005, 07:27 AM

Anyone got the technical and how to do it yourself ? If so let me know. been searching online can't find the gap clearance from factory. Also can someone tell me how to do it on single cam.

ECU-MAN

14-09-2005, 11:17 PM

dude

search harder :) the answer is out there

http://www.ozhonda.com/forum/showthread.php?t=15443&highlight=tappets+DIY

http://b16a2.kicks-ass.net/automotive/honda/techguide/civic/93breeze+VEi_tech_guide.htm

1993 Breeze
V.I.N: JHMEG331

Engine: D13B2

Valve clearances (cold)
Inlet 0.18 - 0.22mm
Exhaust 0.23 - 0.27mm

at valve

Vtec_inside

15-09-2005, 02:05 PM

you guys are life saver thx man. ya did not search for tappets adjustment man . thx alot fot the info ECU MAN.

Vtec_inside

16-09-2005, 03:02 AM

ecu man if ur reading just curious valve clrance can be anything in between the figure given or ie inlet .18-.22 mm?

ECU-MAN

16-09-2005, 10:44 PM

yes,

I like to do them in the middle, more to tight side of things say for inlet
.19 or .20

Vtec_inside

17-09-2005, 02:39 PM

kool ya i have done my car it runs much better flat spot gone

Vtec_inside

20-09-2005, 11:07 PM

just a bump for the other trend regarding valve clarence .

DHOCHKG

22-09-2005, 04:10 PM

dude

search harder :) the answer is out there

http://www.ozhonda.com/forum/showthread.php?t=15443&highlight=tappets+DIY

http://b16a2.kicks-ass.net/automotive/honda/techguide/civic/93breeze+VEi_tech_guide.htm

1993 Breeze
V.I.N: JHMEG331

Engine: D13B2

Valve clearances (cold)
Inlet 0.18 - 0.22mm
Exhaust 0.23 - 0.27mm

at valve

Wat about a 93 Integra Vti-R?