Dammit! Need wheel alignment help.

[Gaff]

Ok, i've got a '88 crx, lowered a couple running King springs, GAB shocks and 205/40/17" tyres. Camber is about 2 degrees each side.
Anyway, the problem is that my alignment only stays straight for about a month or two before it starts to toe out again. All of the differnt mechanics i get to look at it claim that nothing is loose and that it all goes back to place fine. I never bump kerbs and i'm constantly avoiding inspection plates and holes etc. so im getting a bit pissed about having to get it looked at so often.
So yeah, any ideas would be great.

Cheers,
Gaff

[phantom_civic]

try to get a camber kit for ur car and btw how many inches is it lowered?

[Gaff]

its lowered about 2". I personally dont think a camber kit is gonna help too much though, as that shouldnt affect toe.
might just get another alignment and get them to put some threadlock on there.

[bennjamin]

if your toe is easily put out of wack , then i would suggest replacing the rear control arms that connect to the rear trailign arm. They must be worn or the actual trailign arm bushes are worn , vibrating them back out of spec. Jack up the read end and check for excessive movement and take it from there :)

[genk-jomblo]

camber it -3 ehehe ... gotta be that hot dude.