different between dc2 and dc2r?

[X8TEENX]

1 dc2 which had mugen full exhaust system+apexi filter+tuned vafc2..he got 102kw atw..can go to 8400 rpm

1 dc2r which had x-force full exhaust system+apexi filter+tuned vafc...he got 148KW atw.. can go to 9500rmp

is that much different btw this two??

[typsy]

well 140hp is eqivilent to 104 kw. thats a massive 44kw advantage to the DC2R unless thats a typo, and i dont think those figures are true if you are talking about atw.

[X8TEENX]

they say when they tuned their vafc then get the figure..

[X8TEENX]

well 140hp is eqivilent to 104 kw. thats a massive 44kw advantage to the DC2R unless thats a typo, and i dont think those figures are true if you are talking about atw.



so you mean dc2r may not get 148kw atw ??wif those things

[jdmlvn]

horsepower and kilowatts is different mate..
what i usually do to convert is..

HP divide 1.3 = kW
or
kW multiply 1.3 = HP

[locote]

1.34 is the exact number to divide and multiply by

[typsy]

so you mean dc2r may not get 148kw atw ??wif those things

yes, DC2R will not get 148 kw atw with those mods. I've seen a DC2R with similar engine mods getting about 118 kw atw.

[X8TEENX]

so that guy was bs to me...damn...that yellow dc2r are cheater..hehe

[tinkerbell]

yes, it would appear that you have been bullshitted :(

no non-turboi DC2R i know puts out that much, and i know alot of powerful DC2R's...

[GreekWarrior]

horsepower and kilowatts is different mate..
what i usually do to convert is..

HP divide 1.3 = kW
or
kW multiply 1.3 = HP


1.34 is the exact number to divide and multiply by

The exact value is 0.745699872. :D

HP multiply 0.745699872 = kW

kW divide 0.745699872 = HP

:thumbsup:

[lerroy]

you could jsut go here

http://www.mr2ownersclub.com/converter.htm

and yeah 147 would need some serious and i mean serious engine work

[PLYBOY]

yes, DC2R will not get 148 kw atw with those mods. I've seen a DC2R with similar engine mods getting about 118 kw atw.


I have a Sir integra with CAI, 98' spec 4>1's, full exhaust, tuned with VAFC2 and i got just over 120Kw atw on a rolling road dyno.. with 17's on.. there is no way a dc2r will get that much with very little mods aye..

[X8TEENX]

wow...120kw wif 17's are very good result..

[tinkerbell]

wow...120kw wif 17's are very good result..

it is on a NZ dyno, they read about 10% higher than Australian dynos...

[PLYBOY]

it is on a NZ dyno, they read about 10% higher than Australian dynos...

WTF, a dyno is a dyno.. plonker!!

[InSaNe]

i own a 98 spec DC2R JDM wit HKS Exhaust w/ custom cat back, JDM 4-1 extractors, Ogura lighend Flywheel, CROWER Valve, Dual Valve Spring, Titanium Retainers, blitz intake, and i pulled 125kw@w :d

[tinkerbell]

WTF, a dyno is a dyno.. plonker!!

not in my opinion,

or this guys:

http://www.twinturbov8.com/dynostuff.htm

[bennjamin]

like cars tuned on dynos - dynos too are only as good as the calibration methinks !
Im sure varibles such as environment , configuration and customer satisfaction all come into play.