PDA

View Full Version : Water cooled turbos



superR
30-09-2005, 05:16 PM
it may seem like a stupid queston for most but..... where do you get the water to cool the turbo.... and how do you feed and return it to the turbo???
and also does any one know of any places to get a kit for the oil feed/drain lines?


any comment would help me out heaps as i am saving heaps by installing most of my stuff my self.

james :D

LVNIT
30-09-2005, 05:53 PM
http://stores.ebay.com/Tuner-Toys - for oil lines

superR
30-09-2005, 06:06 PM
thanks Lvnit thats not exactly looking for.... for the oil lines i would prefer to use an T peice where the oil pressure switch is ....... any kits that use that method.... ive searched all over ... the only opiton i can see is getting everthing individually from pirtek or some place like that. :confused:

superR
30-09-2005, 06:35 PM
the feeding and retern of the oil is not my main problem ....as i said above i can just go geget it all seperatly(although a kit would be easyer). My main problem is the feed and retern of the water to the turbo.

Weq
30-09-2005, 11:06 PM
simple man. im sure dc2's run a aicv or ftiv or something similar where water is pumped through the TB. simply put, put the turbo in the middle and everything is sweet. IE run intake manifold->turbo and turbo->tb. i think i used about 3m worth of tranny cooler lines for it. just measure her up and goto clarke rubber and cut the length u need, very easy.

and any stealthmode oil line kit will worth. they all use a t-price from the pressure switch. i got mine from fast-turbo, a supplier on honda-tech.

Weq
05-10-2005, 06:45 PM
http://members.optusnet.com.au/loxy/car/turbo/new_setup/install/water_lines.jpg

superR
05-10-2005, 07:47 PM
thanx heaps weq, your a champ!