what parts would i need to do a b16a conversion on my EG breeze

[timmya2]

so far i have :

*b16a engine with manual gearbox

which includes
- 2nd GEN HYDRAULIC 5 Speed Manual Gear Box

- Intake Manifold

- Exhaust Manifold

- Alternator

- Starter

- ECU

- Harness

- Power Steering Pump

*eg6 harness - i dunno wat this is?


wat other stuff will i need

thanx guys for helping.. oh and if possible keep it detailed.. like every little part i would need as i am on a budget. It will help me calculate exaclty how much i need to spend if i knew every single part.

thanx again

[pillow]

For one you will need to convert to EFI as your car is carby. Use a VTi fuel tank or something similar. Have you searched the forums? This has been covered heaps of times;) Eg: I think Danny did a diy article on it and I know there are a number of EG's running around on this forum with B16's in them

[dcii_sir]

EG6 harness I believe is the loom (the wires that connects to ECU, the cluster, aircond unit etc etc). You need a fuel pump as well. If you look around for front cuts, you can get some decent ones for under $2500 where they dont strip anything other than the panels on the outside. This includes everything under the bonnet. Stuff like aluminium radiator, stock struct bar, front lip, cluster, climate control unit, ABS unit (if you find an SIR II). If you're lucky, you may also get the front brakes + stock sussy which are bigger than the standard EG civics such as the Si or VTi. And if you're really lucky, you may also get the rear brakes for free.. :)





so far i have :

*b16a engine with manual gearbox

which includes
- 2nd GEN HYDRAULIC 5 Speed Manual Gear Box

- Intake Manifold

- Exhaust Manifold

- Alternator

- Starter

- ECU

- Harness

- Power Steering Pump

*eg6 harness - i dunno wat this is?


wat other stuff will i need

thanx guys for helping.. oh and if possible keep it detailed.. like every little part i would need as i am on a budget. It will help me calculate exaclty how much i need to spend if i knew every single part.

thanx again

[timmya2]

2500?!!

for a front cut?

oh please tell me where i will pay cash right now

[dcii_sir]

www.justjap.com (http://www.justjap.com)

I got it 2 years ago.. not sure what the prices are these days.

[timmya2]

i went there they dont even have any in stock. :(

dya guys think this is cheap

http://cgi.ebay.com.au/HONDA-B16A-ENGINE-COMPLETE-PACKAGE-W-MT-GEAR-BOX_W0QQitemZ4579935731QQcategoryZ102337QQrdZ1QQcm dZViewItem

and wat else would i need to do a conversion on top of this engine and gearbox..

i know i will need

fuel pump

fuel tank

fuel rails

eg6 harness

anything else i missed?

[dcii_sir]

I think its a bit expensive for a non front cut and the postage is $350 as well. I dunno what else you need coz I got everything off front cut ...

[timmya2]

true i would rather just get a front cut, danny's writeup specified that eg6 frontcuts are around 2600..

i cant find any in this price range.. if someone finds one please please please shoot me the number.

cheers

[[[d a n n y]]]

www.justjap.com (http://www.justjap.com/)

I got it 2 years ago.. not sure what the prices are these days.

dried up since 2 years ago

no B serise there

only H

[iamhappy46]

Yanks are buying up the B16 market, which makes it really hard.
If your really having trouble finding a front cut, you could sell your current car and buy the real thing?? Add in the total cost of a conversion and the real thing can suddenly become a much cheaper proposition...

There are also a lot of other motors that would be good in your Civic: AUDM D16 VTEC or JDM D15B VTEC, then there is always the H series...

[tRipitaka]

oh.. and get a new cluster..

[numlock]

and panadol tablets if diy!

[timmya2]

Yanks are buying up the B16 market, which makes it really hard.
If your really having trouble finding a front cut, you could sell your current car and buy the real thing?? Add in the total cost of a conversion and the real thing can suddenly become a much cheaper proposition...

There are also a lot of other motors that would be good in your Civic: AUDM D16 VTEC or JDM D15B VTEC, then there is always the H series...

yeh would love to get my hands on em

can u recomend me some wreckers selling those common honda engines?

cheers

[iamhappy46]

I got my JDM D15B VTEC + P08 ECU from James at Allstate Auto Imports and I believe he may have a few left.

I posted their 1800 number previously, he is really good... Tell him Matt sent you.
If not the Spare Parts Magazines, normally have heaps of stuff on front cuts / bare engines.

[JoSS_CiViC]

hey im lookign for a k20 for my civic any ideas were i can et 1 from in melb thanks

[EGB18CT]

hey also looking into putting a B16a 2 in my eg where too can i get in melb?

[mini_s2000]

look in the traders section, and ring wreckers around melbourne! just get as many quotes as possible because the price may vary!