standard teg gsi fuel pump, 350hp???

[locote]

could the stock fuel pump of a gsi integra flow enough for 300fwhp???
if not what pump is recomended??
ill be running 440cc injectors.

[Weq]

the standard pump will flow enough to 100% the 440cc injectors at standard pressure. the 440's wont support 300hp though imo.

[locote]

what sort of injectors would i need and will the stock pump be enough for 300hp+

[ALLMTR996]

A 440cc injector will flow 83.80hp each at 3 bar fuel pressure this is flywheel power.I have never seen a STD honda fuel pump flow 300hp in a turbo setup I would use a Walbro pump if this is turboed and step the injectors up to 550cc.
ALLMTR996

[locote]

cool thank you.
i dont want my motor to blow when i turbo it so wanna know what rating inj and pump i need, but fuel lines should ok right??

[Mugen boy]

walbro , highly recommended

[ALLMTR996]

cool thank you.
i dont want my motor to blow when i turbo it so wanna know what rating inj and pump i need, but fuel lines should ok right??
STD fuel lines are fine just upgrade to a SARD pressure regulater along with the Walbro pump and injectors.The correct Walbro is a direct replacment for the factory pump so it is a very easy fit.
ALLMTR996

[locote]

do you know the part number for the walbro pump, what brand injectors SARDS??

[locote]

are the sard regulators universal or do they have one for the B motors??

[ALLMTR996]

do you know the part number for the walbro pump, what brand injectors SARDS??
There are 2 Walbro's that you can use a 500hp one and a 600hp one the part numbers that I have are not Walbro they are from a supplier.Injectors depend on your ECU choice.
ALLMTR996

[ALLMTR996]

are the sard regulators universal or do they have one for the B motors??No they are a universal unit but if you get it from Hi Octane Racing in Sydney they have the adapter for Honda fuel rails.