Damnit the dizzy wont fit?!

[krasyvy]

or am i mounting it wrong

here's some pics of my d15b and the dizzy i got off an si..


also there are some pics of the engine harness i picked up, doesn't look like anything plugs into the ecu....do i need anything more than this in terms of harnesses or will my dual carby have it already?

please help guys

http://www.ozhonda.com/gallery/watermark.php?file=500/2719IMG_0159.jpg

http://www.ozhonda.com/gallery/watermark.php?file=500/2719IMG_0171.jpg

http://www.ozhonda.com/gallery/watermark.php?file=500/2719IMG_0166.jpg

http://www.ozhonda.com/gallery/watermark.php?file=500/2719IMG_0163.jpg

http://www.ozhonda.com/gallery/watermark.php?file=500/2719IMG_0162.jpg

http://www.ozhonda.com/gallery/watermark.php?file=500/2719IMG_0172.jpg

[ECU-MAN]

http://b16a2.kicks-ass.net/pics/si-loom.jpg

the yellow circle above is three connectors that connect to the engine to cabin loom on the LH shock tower,

what you need now is that loom, you will have to seperate the PGMFI wires from the rest of the loom and wire up a PGMFI main relay. this loom comes in to the cabin from the LH side and runs all the way to the RHS of the dash to the fues box area, Its like the main loom inside th cabin.


as for the dizzy, if you hold it in the right place it will run the car, but it may or may not be way off any of thoes mounting holes. at the end of the day is you want a perfect fit, find a dizzy from that exact engine, or fabricate a plate or someting to mount that dizzy to the correct location, this will be a hard thing to do as your need to engine to be ready to start so you can find the optimum timming location.

[krasyvy]

that loom that u are referring to (the one u say i need), will my breeze 94 have it?

my car has an ecu... not sure if that means anything

[ECU-MAN]

I think your exsisting loom will be lacking some ( alot ) of the wiring needed to do the job, have a look at your shock tower and see if that loom you have above plugs into it,

[krasyvy]

so 3plugs on my existing loom should plug into this

and if it does i'm fine ?

[EG5[KRT]]

just for interests sake ? why r u changing to diff dizzy ???

is it hard to get a breeze dizzy ?

coz i thought the dizzy would b different due to one being fuel injected and one being carbi ?

therefore it would have different pick up for timing ?

[michael_antoi]

it's a new engine mate.

[krasyvy]

yeh i'm putting in a d15b vtec engine

[ECU-MAN]

so 3plugs on my existing loom should plug into this

and if it does i'm fine ?

i recon it wont be any good as it wont have

shelded wires for TDC, CYP, CKP,
nor the wire for them or the rest of the PGMFI sensors

abit of wiring will be needed

[SiR JDM]

krasyvy - I have a d15b black top vtec engine if you need any help with pictures or anything give me a PM and ill give u a hand as best I can